Documente Academic
Documente Profesional
Documente Cultură
Select the air flow system and installation method to match the usage
environment and purpose of the room.
Two types of clean air conditioner are available – an integrated outlet unit model and a separate outlet unit model.
Furthermore, it is possible to configure the air flow system to ceiling intake or floor-level intake according to the panel selected.
This makes it possible to respond precisely to the layout and purpose of the room.
Model series
Integrated outlet unit model
1
Instances of installation by type (for a hospital)
Type Ceiling intake type Floor-level intake type
(high speed contracted flow/high ceiling model) (gentle wind distribution/high cleanness class model)
Construction work is simple and a ceiling installation is Easy to increase the cleanness and air-conditioning effect.
Features possible. A low flow speed prevents drying of the affected part and
Dust filtering and air-conditioning can be started immediately. the experience of drafts.
Integrated Intake
outlet unit (sourced locally)
model
Applications: Surgery prep rooms, recovery rooms, nurse stations, etc Applications: Operating theatres, delivery rooms, etc
Blow
method Somewhat concentrated air conditioning centered Total air conditioning with an emphasis on cleanliness.
directly under the outlet. Maintenance from a different room possible.
Can air-condition irregularly shaped rooms.
Applications: CCU*2, sterile rooms, etc Applications: Premature nurseries, newborn nurseries, ICU*3, etc
*1. Cleanliness class. A scale expressing the cleanliness of air established by NASA (National Aeronautics and Space Administration). Class 10,000 represents a state of less than 10,000 minute
particles of diameter under 0.5 µm per cubic foot.
For comparison, the cleanliness of a typical office is around class 1,000,000.
*2. CCU (Cardiac Care Unit). A ward dedicated to the admission of patients with myocardial infarctions and other heart diseases.
*3. ICU (Intensive Care Unit). A ward for the careful treatment and nursing of patients with serious illnesses, injuries, or recovering from operations.
The ceiling intake type provides concentrated air conditioning Please make sure to use the floor-level intake type in
centered directly under the outlet. Accordingly, please be aware of the following kinds of locations.
the following. • Locations in which heating of the lower part or the entire room is
• Sufficient heating my not be achieved near the floor or at locations far from the outlet. important.
• In the case of utilization in a hospital, some patients may be susceptible to cool • Locations necessitating a particularly high cleanliness factor and
Attention drafts, so please ensure that they do not come directly under the outlet. in which there are a lot of people.
2
Providing
Providing eacheach
andand every
every necessary
necessary
function
function at at a high
a high standard.
standard.
Clean
Clean
Realizing
Realizing cleanliness
cleanliness classwith
class 10,000 10,000 withfilter
an HEPA an HEPA filter
(sold
(sold separately).
separately).
The low
Thepressure-loss
low pressure-loss
standard
standard
HEPAHEPAfilter filter
(sold(sold
separately)
separately) Standard
Standard
HEPAHEPA
filter filter
demonstrates
demonstrates
a superior
a superior
dust dust
filtering
filtering
performance
performance
and easily
and easily
accomplishes
accomplishes
an airan
cleanliness
air cleanliness
of class
of class
10,000.10,000.
The HEPA
The HEPAfilter filter
has ahas
structure
a structure
incorporating
incorporating
a pleated
a pleated
glassglass
fiber fiber
filter filter
medium,medium,
making
making
it highly
it highly
efficient
efficient
and suitable
and suitable
for for
cleanclean
rooms rooms
etc. etc.
* It may not
* It be
maypossible
not be possible
to maintain
to maintain
cleanliness
cleanliness
in roomsinwith
rooms
low with
air tightness.
low air tightness.
* An antibacterial
* An antibacterial
HEPA filter
HEPA
(order
filter
item)
(order
which
item)
inhibits
whichthe
inhibits
propagation
the propagation
of filteredofbacteria
filtered bacteria
is also available.
is also available.
Cannot be Cannot
used with
be used
the standard
with the standard
HEPA filter.
HEPA filter.
Antibacterial
Antibacterial
Suppresses
Suppresses the propagation
the propagation of in
of bacteria bacteria
the duct in the duct
with
with a proprietary
a proprietary mixed mixed antibacterial
antibacterial powder coating.
powder coating.
The filter
The filter
implements
implements
an antibacterial
an antibacterial
treatment
treatment
with awith
newa coating
new coating
combining
combining
a silver-based
a silver-based
inorganic
inorganic
antibacterial
antibacterial
material
material
effective
effective
against
against
germsgerms
and anandorganic
an organic
antibacterial
antibacterial
material
material
that prevents mold.mold.
that prevents
This enhances the antibacterial
This enhances condition
the antibacterial of theofduct.
condition the duct.
Antibacterial
Antibacterial fiberinused
fiber used in thefilter.
the intake intake filter.
An An antibacterial
antibacterial type istype
also is also
used forused for filter.
the HEPA the HEPA filter.
With With
a long-life
a long-life
filter filter
employing
employing
mold-preventing
mold-preventing antibacterial
antibacterial Structural
Structural
diagram
diagram
Fan Fan
fiber fiber
near near
the intake,
the intake,
cleaning
cleaning
performance
performance
is increased
is increased
even even
further.
further. An antibacterial
An antibacterial type type
(order(order
item)item)
mademadefrom from
a a
Intake Intake
filter filter
combination
combination of antibacterial
of antibacterial fibersfibers that suppress
that suppress the the (antibacterial
(antibacterial
fiber) fiber)
propagation
propagation of collected
of collected bacteria
bacteria is available.
is also also available.
3
Installation
Installation
example example
(in a hospital
(in a hospital
facility)facility)
Quiet
Quiet
AllAll models
models incorporateananindustry-leading
incorporate industry-leadingmeticulous
meticulous
quiet
quiet design,
design, operatingatatunder
operating under41dB.
41dB.
Operating
Operating
noisenoise
is substantially
is substantially
reduced reduced
by employing
by employing
a a
proprietary
proprietary
double-structure
double-structure
outletoutlet
filter chamber,
filter chamber,
soundsound
absorbing
absorbing
heat insulation,
heat insulation,
and aand
lowapressure-loss
low pressure-loss
HEPAHEPA
filter etc.
filter etc.
All models
All models
emit under
emit under
41dB 41dB
of noise.
of noise.
(38dB(38dB
during
during
low-power
low-power
operation)
operation)
*Operating
*Operating
noise may
noise
be greater
may bethan
greater
these
than
values
theseinvalues
highly in
reflective
highly reflective
locations.locations.
The outdoor
The outdoorunit also
unit operates
also operates
quietly.
quietly.
If setIftoset
night
to night
time quiet
time quiet
mode, mode,
the air
the
conditioner
air conditioner
becomes
becomes even even
quieter at night.
quieter at night.
Labor-saving
Labor-saving
Filter
Filter maintenance
maintenance unnecessaryfor
unnecessary forabout
aboutfive
fiveyears.
years.
Under-surface
Under-surface access
access system
system forfor easy
easy maintenance.
maintenance.
The HEPA
The HEPA
filter filter
has an has
exceptionally
an exceptionally
long long
life, not
life, not
requiring
requiring
maintenance
maintenance for about
for about
five years.
five years.
Daikin Daikin
has has
aimed aimed
to reduce
to reduce
maintenance
maintenance
workwork
from from
variousvarious
perspectives,
perspectives,
including
including
an under-surface
an under-surface
access access
systemsystem · HEPA filter
· HEPA filter · Fan · Fan · Drip pan· Drip
replacement
replacement inspection
inspection
inspection
pan inspection
· Pre-filter
· Pre-filter
replacement
replacement
that eliminates
that eliminates
the necessity
the necessity
for service
for service
panels panels
and an
and an
easilyeasily
detachable
detachablefan and
fan drip
and pan.
drip pan.
*The maintenance
*The maintenance
period differs
periodsignificantly
differs significantly
according according
to the cleanliness
to the cleanliness
of the room
of the
androom
operating
and operating
time of the
time
airof
conditioner.
the air conditioner.
Precise
Precise operation
operation androom
and roomtemperature
temperaturecontrol.
control.
Operation
Operation
is as is
easy
as easy
as forasanfor
ordinary
an ordinary
air conditioner.
air conditioner. WiredWired
liquidliquid
crystal
crystal i-touch
i-touch
controller
controller
Control
Control
by distant/dual
by distant/dual
remoteremote
control
control
operation
operation remote
remote
controller
controller
possible.
possible.
SystemSystem
is equipped
is equipped
with awith
self-diagnosis
a self-diagnosis
function that indicates
function the location
that indicates and details
the location in thein the
and details
eventevent
of a malfunction. Combine
of a malfunction. with awith
Combine controller that can
a controller that can
centrally control
centrally multiple
control air conditioners*
multiple to reduce
air conditioners* total total
to reduce
air conditioner management
air conditioner management workwork
in combination with with
in combination
otherother
air conditioners.
air conditioners.
*Individual
*Individual
control ofcontrol
up to 64
of up
groups
to 64possible
groups possible
by central
bycontrol.
central control.
4
Clean air conditioner P45/56/71
Two types available according to the A HEPA filter of dust filtering efficiency Possible to incorporate an antibacterial
application. Possible to select the air 99.97% realizes an air cleanliness of HEPA filter employing antibacterial fiber
flow system and installation method in class 10,000*. (count method 0.3 µm) in the outlet filter (modified product).
*Cleanness class. A scale expressing the cleanliness The floor-level intake system prevents
accordance with the usage environment
of air established by NASA (National Aeronautics and
and purpose of the room. Space Administration). Class 10,000 represents a uncomfortable drafts with a low flow
state of under 10,000 minute particles of diameter speed of 0.5 m/s.
“Floor-level intake type” under 0.5 µm per cubic foot. For comparison, the Industry-leading meticulous quiet design.
cleanliness of a typical office is around class
A clean air flow spreads 1,000,000.
(Operation noise under 41dB for all
throughout the whole models)
The propagation of bacteria in the duct
Intake
conditioner and
(modified product) treated)
J
Gas pipe connection
345
210
50
505 or more
(Square hole)
280
310
340
200
492
Power connection
392
ø226 P.C.D
312
203
5
6 730 917 4 66 188
Junction wiring connection
(Note 6) 27
(Main unit mounting dimensions) 12
10 K
4-M4 countersink (cyclotomic) Outlet panel
16-ø7 hole
14 13
View on arrow A
HEPA filter
(Note 2)
Inlet
7
1575 (Centered on outlet) L.L. filter
11 12 9 8 240 (Centered on inlet) Electrical components box
Shield plate
C (Ceiling aperture)
Panel frame
Back shield plate
Type A B C D E F G H J K
(A)
D
B
H
Gas piping connection
345
435
50
505 or more
210
310
340
200
492
392
Power connection
312
ø226 P.C.D
203
4
730 917
5
66 Junction wiring connection
(Main unit mounting dimensions) 12
6
10
65
View on arrow A
Inspection panel
1490 (Center of outlet panel)
Diffusion punching 7 Electrical components box
10 11 8
Shield plate
(45)
Panel frame
B (Ceiling aperture)
P45/56 918 1115 1150 1000 960 930 900 5×150=750 1050 This diagram is based on the
P71 1218 1415 1450 1300 1260 1230 1200 5×200=1000 1350 FBXYP45/56MA.
(45)
70
5×200=1000
50
210
505 or more
2×65=130
(Square hole)
(Square hole)
345
280
220
200
150
190
435
310
340
40
25
492
392
ø226 P.C.D
312
20-ø8 hole
203
10
917 66 16-ø7 1350
(Fresh air intake) 1080 (Square hole)
hole 13 11 1110
4 5 4-M4 countersink
40-ø4.7 (cyclotomic) View on arrow A
hole
(Note 2)
7 10 9 8 240 (Centered on inlet)
Liquid piping connection Inlet
Gas piping connection L.L. filter
1415 (Ceiling aperture)
1450
(300)
Notes) 1. Please use a dedicated HEPA unit for the outlet filter unit.
Inlet punching
1130 (Ceiling aperture)
1170
2. This is the distance between the ceiling and the end face of the main unit plate. (Not the distance between the ceiling and the seal
material.)
3. In the case of drawing in air through the fresh air intake, install a damper linked with the indoor unit fan in the duct and ensure that
the air intake is cut off when the fan is stopped. It is possible for the taken-in air to flow backwards through inlet filter and for the
dust deposited in the filter to be returned to the room.
4. In the case of an installation in an operating theatre etc where an air conditioner malfunction may have serious consequences,
please build in redundancy with two or more outside units.
5. Please do not place things that must not become wet under the indoor unit. Condensation may fall in the case of humidity of 80%, in
the case the drainage outlet is blocked, or in the case the air filter is dirty.
75
70
5×200=1000
50
505 or more
210
2×65=130
(Square hole)
(Square hole)
220
150
190
345
40
280
200
435
310
340
25
492
392
20-ø8 hole
312
ø226 P.C.D
203
188 7×150=1050
(Main unit mounting dimensions) 12
Notes) 1. Please use a dedicated HEPA unit for the outlet filter unit.
2. This is the distance between the ceiling and the end face of the main unit plate. (Not the distance between the ceiling and the seal
material.)
3. The back inlet companion flange is attached to the panel (BYBP82D56WP).
4. In the case of drawing in air through the fresh air intake, install a damper linked with the indoor unit fan in the duct and ensure that
the air intake is cut off when the fan is stopped. It is possible for the taken-in air to flow backwards through inlet filter and for the
dust deposited in the filter to be returned to the room.
5. In the case of an installation in an operating theatre etc where an air conditioner malfunction may have serious consequences,
please build in redundancy with two or more outside units.
6. Please do not place things that must not become wet under the indoor unit. Condensation may fall in the case of humidity of 80%, in
the case the drainage outlet is blocked, or in the case the air filter is dirty.
505 or more
2×65=130
2×65=130
(Square hole)
(Square hole)
190
220
190
220
150
40
40
150
345
345
492
492
7×150=1050
7×150=1050
(Main unit mounting dimensions) 12
10
65
27 (Note 3)
10
1110
(Note 1)
(280)
(45) (594) (45)
480 4 4
(45)
2 2
(Ceiling aperture)
16×65=1040
16×65=1040
(1120)
(1218)
1350
1350
1450
1415
1450
1415
790 790
View on arrow A View on arrow A
Notes) 1. Heat insulating material (polyethylene foam) is affixed to the inside of the Notes) 1. This is the distance between the ceiling and the end face of the main unit
outlet panel. plate. (Not the distance between the ceiling and the seal material.)
2. This is the distance between the ceiling and the end face of the main unit
plate. (Not the distance between the ceiling and the seal material.)
3. This is the height excluding the screws for securing the outlet panel on the
surface (height: 10 mm).
6
Standard specifications (50/60Hz)
Type Integrated outlet unit model Separate outlet unit model
Indoor unit FBXYP45MA FBXYP56MA FBXYP71MA FBXYP71MAP
Model name
Outlet unit Integrated with the indoor unit BAFJ82B80
Power Single phase 200V (power supply also necessary for the indoor unit) 50/60 Hz
Cooling capacity *1 kW 4.5 5.6 7.1
Heating capacity * 2 kW 5.0 6.3 8.0
Rated power When cooling * W 220/280 330/350 423/479
1
*In the case of an installation in an operating theatre etc where an air conditioner malfunction may have serious consequences, please build in redundancy with two or more outside units.
• Items marked in the option list are handled by Daikin Industries, Ltd. All other s are handled by O.K . KIZ AI CO., LTD.
Di cetak di Indonesia