Sunteți pe pagina 1din 5

Biodiesel Fundamentals for High School

Chemistry Classes

Laboratory 3: Determination of the Acid Number of


Vegetable Oils by Titration

Topics Covered
pH vs. acid number
Acidity and acid values in organic solutions
Titration techniques
How to obtain acid values of vegetable oils

Equipment Needed (per pair or group)

One graduated titration burette with stand, 50 mL


Three Erlenmeyer flasks, 250 mL each
Weighing scale (readable to 0.01g)
Pipette

Reagents Needed (per pair or group)

Titrant solution (prepared by instructor)


Titration solvent (prepared by instructor)
Phenolphthalein indicator solution (prepared by instructor)
2 grams vegetable oil

Background Information -- Acid number


To make biodiesel, triglycerides (fats and oils) react with an alcohol (such as methanol) to
produce methyl fatty acid esters and glycerol. A catalyst such as potassium hydroxide or sodium
hydroxide is added to speed up the process. However, if the oil or fat is degraded and has a lot of free
fatty acids (fatty acids not attached to a glycerol backbone), these free fatty acids can react with the
catalyst first to create soap, which must be removed. Therefore, before making biodiesel it is necessary
to determine the amount of free fatty acids in the oil or fat, in order to know how much catalyst to
add.

Fats and oils with high free fatty acid levels include waste vegetable oil and animal fats. These
feedstocks are cheaper to use than food-grade vegetable oil, and so are often desirable as feedstocks
for making biodiesel.

You are probably familiar with the concept of “pH” to measure the acidity or alkalinity of an
aqueous solution (a solution of a substance dissolved in water). pH can be measured using pH paper
or a pH meter. The pH number indicates the strength of the acid. The stronger the acid, the lower the
pH number.

20 Biodiesel Education Program | Biological and Agricultural Engineering | University of Idaho


Biodiesel Fundamentals for High School
Chemistry Classes

Can we use pH paper or a pH meter to figure out how much free fatty acids are in a sample of
oil or fat? Unfortunately, we cannot, because pH will not tell us how much acid we have—it will only
tell us the strength of the acid.

When making biodiesel, we need to know not the strength of the acid, but the amount of free
fatty acids (FFAs) present.

In addition, pH is not applicable in a fat or oil, because the hydrogen in organic solutions does
not dissociate into hydrogen ions. Acidity exists in organic solutions containing acidic functional
groups such as carboxyl groups (-COOH ), which are found in fatty acids[1].

Instead of pH, we have to use a measure called the acid number. The acid number is a
measure of the acidity in a non-aqueous solution (non-water solution) such as an organic solution.

The acid number is expressed as the quantity of a known concentration of potassium


hydroxide (KOH) consumed by titrating one gram of a sample in the units of milligrams (mg) of KOH
per gram of sample, i.e., mg KOH /g of sample.

Since organic solutions are not usually miscible with aqueous potassium hydroxide solutions,
the addition of another solvent that helps the organic chemical dissolve in an aqueous solution is
typically needed.

With manual titration, a color indicator, such as phenolphthalein, is needed.

Background Information -- Acid-Base Titration


Titration is a wet-chemistry practice to determine the concentration of an unknown chemical
in a solution. An acid-base titration is a titration that uses a known concentration of an acid (or base)
solution, such as hydrochloric acid (or potassium hydroxide), to react with an unknown base (or acid)
in solution.

After the base (or acid) is all consumed, the solution is neutral.
Any small amount of acid (or base) added after this point will cause the
solution to rapidly become acidic (or basic).

Based on the acid (or base) consumed, the concentration of the


unknown base (or acid) can be calculated. The originally known
concentration solution is then called the standard solution of titrant,
which is used to titrate the unknown.

Most titrations are conducted in aqueous solutions, such as


acid-base titration. If the sample to be titrated is water insoluble (such as
oil), a co-solvent or a different solvent other than water is needed.
Figure 1 Illustration of a titration set-up

1 Sometimes, the acidity of an organic solution can be also contributed by Lewis acids, which do not contain carboxyl groups but behave
like an acid due to the fact that they are electron receivers or proton donors. A Lewis acid is any specie that accepts electrons.

21 Biodiesel Education Program | Biological and Agricultural Engineering | University of Idaho


Biodiesel Fundamentals for High School
Chemistry Classes

The equipment for performing titrations manually can be simply a


calibrated burette for the standard titrant solution, and a volumetric flask that
contains a precise volume of the unknown solution. An indicator, such as
phenolphthalein, is needed to provide visual indication for the endpoint.

Automated titration devices are also available to perform titrations with high
efficiency and accuracy, and are widely used in commercial applications.

Fig. 2: Auto-titrator
Pre-Lab Questions
How is pH different from acid value?
Why is pH not used when measuring the amount of acid in an oil or fat?

Safety Note: In this lab you will be using solutions containing isopropyl alcohol and toluene, which
are both highly flammable. Keep these away from heat or flames. The titrant contains potassium
hydroxide, which is caustic and can burn skin and harm eyes. Wear gloves, a lab coat or apron, and
eye protection when using potassium hydroxide.

Laboratory Procedure

1. Weigh flask and record the weight on Table 1.


2. Weigh approximately 1 g of oil sample to the nearest 0.01 g [2] and transfer to the titration
flask.
3. Record the sample size in Table 1.
4. Add 125 mL of titration solvent into the flask containing the sample.
5. Add a couple of drops of the phenolphthalein indicator into the solution.
6. Swirl the solution vigorously for approximately 1 minute to ensure the uniformity of the
solution.
7. Prepare a second sample for titration by repeating the steps a) though f)
8. Prepare a blank/ reference with only titration solvent and phenolphthalein indicator (no
oil) by repeating steps a) through f).
9. Fill the burette with the titrant solution.
10. Record the starting volume of titrant on Table 1.
11. Carefully introduce the titrant from the burette into the flask while swirling the solution
vigorously but without spattering.
12. Stop introducing titrant if the solution changes color to pink.
13. Record the ending volume of titrant on Table 1.
14. Repeat the steps i) through m) for the second sample.

2 This is based on an expected acid number of between 5 and 20; if acid number is higher than 20, a sample size of 0.25 g is
recommended; if the acid number is lower than 5, a sample size of 5.0 g is recommended.

22 Biodiesel Education Program | Biological and Agricultural Engineering | University of Idaho


Biodiesel Fundamentals for High School
Chemistry Classes

15. Repeat the steps i) through m) for the blank (please note that the blank requires a much
smaller volume of titrant because of its low acidity).

Table 1 Raw data recoding


Sample Sample Blank
Category Variable Quantity
#1 #2 #b
Wini Flask weight (g) --
Sample
Wend Flask + sample (g) --
size
W Net sample size (g) --
Vini Starting vol. (mL)
Titrant
Vend Ending vol. (mL)
volume
V Net volume (mL)

Data Processing

Acid number calculation:

A1 = A2 = and

A=

Where: A1, A2, and A are the acid numbers of sample #1, sample #2, and
average, respectively (mg KOH/g)

V1 , V2 and Vb are the net titrant volumes for titrating sample #1,
sample #2 , and blank, respectively (mL)

W1 and W2 are the net sample sizes of sample #1 and sample #2 (mL)

C is the concentration of the standard solution (M or mol/L) provided


by the instructor

Relative precision of the titration: [3]

p% =

Where: p% the relative precision of the titration (in %)

3 If the relative precision is less than a certain value, e.g., 2%, conducting another sample titration is typically recommended.

23 Biodiesel Education Program | Biological and Agricultural Engineering | University of Idaho


Biodiesel Fundamentals for High School
Chemistry Classes

A1 and A2 are the acid numbers of sample #1 and sample #2 (mg


KOH/g)

24 Biodiesel Education Program | Biological and Agricultural Engineering | University of Idaho

S-ar putea să vă placă și