Documente Academic
Documente Profesional
Documente Cultură
ECT Switch 19 mm
Deep Socket
ENGINE COOLANT
Wrench TEMPERATURE (ECT) SENSOR SF19V–01
INSPECTION
1. DRAIN ENGINE COOLANT
2. REMOVE ECT SENSOR
(a) Disconnect the sensor connector.
Gasket (b) Using a 19 mm deep socket wrench, remove the sensor
B10996
and gasket.
Ohmmeter
3. INSPECT ECT SENSOR
Using an ohmmeter, measure the resistance between termi-
nals.
Resistance: Refer to the graph
If the resistance is not as specified, replace the sensor.
30 4. REINSTALL ECT SENSOR
20
(a) Install a new gasket to the sensor.
10 (b) Using a 19 mm deep socket wrench, install the sensor.
Resistance kΩ
0.5
0.3
0.2
0.1
–20 0 20 40 60 80 100
(–4) (32) (80) (104) (140) (176) (212)
S01196
S01699 Temperature°C (°F) Z17274