Documente Academic
Documente Profesional
Documente Cultură
1. Use USB to Ethernet port cable to connect laptop with UMPT USB port
2. Open “Network and sharing center” to change laptop’s IP after connecting cable
3. Set laptop IP as 192.168.0.50, mask 255.255.255.0
Note: Working directory must be defined: directory where xml is located. SFTP icon is displayed
in bottom of the desktop once once SFTP is started
The progress of the configuration file transfer is shown and the success notification is also shown
USING COMMANDS TO CHECK THE TRANSMISSION
1. Click on MML in order to run the commands.
In the output window, 2 IPs can be seen: one for service, one for OM
3. PING from site to M2000 for OM and from site IP to ATN(SITE NEXT HOP)
ATN IP : 10.44.118.181
“QUERING THE ALARMS”
Once you login to the Node, you can check its alarms by clicking on the ALARMS tab
“Checking the device panel”
Click the “Device Maintenance” tab as seen below to see the device panel status