Sunteți pe pagina 1din 2

CMR INSTITUTE OF TECHNOLOGY,

Kandlakoya (v), Medchal road, Hyderabad – 501 401


Ph.No.08418 – 260720 Fax No. 08418 - 222106

Department of Mechanical Engineering


Metrology & Machine tools
MID TERM – I (Set – 1)

Year / Semester: 3 – 1 (A&B Section) Date: 05.09.2018 (FN)


Max Marks: 10 Duration: 10.00 pm to 11.30 pm

Answer any two questions


1. Explain about the different types of chips produced in metal cutting process with the help of
diagrams.
2. Explain taper turning methods with neat sketches.
3. State and explain the various milling operations with neat sketch.
4. Explain briefly about the following with neat sketch a) Open side planer b) Double housing planer

CMR INSTITUTE OF TECHNOLOGY,


Kandlakoya (v), Medchal road, Hyderabad – 501 401
Ph.No.08418 – 260720 Fax No. 08418 - 222106

Department of Mechanical Engineering


Metrology & Machine tools
MID TERM – I (Set – 1)

Year / Semester: 3 – 1 (A&B Section) Date: 05.09.2018 (FN)


Max Marks: 10 Duration: 10.00 pm to 11.30 pm

Answer any two questions


1. Explain about the different types of chips produced in metal cutting process with the help of
diagrams.
2. Explain taper turning methods with neat sketches.
3. State and explain the various milling operations with neat sketch.
4. Explain briefly about the following with neat sketch a) Open side planer b) Double housing planer
CMR INSTITUTE OF TECHNOLOGY,
Kandlakoya (v), Medchal road, Hyderabad – 501 401
Ph.No.08418 – 260720 Fax No. 08418 - 222106

Department of Mechanical Engineering


Metrology & Machine tools
MID TERM – I (Set – 2)

Year / Semester: 3 – 1 (A&B Section) Date: 05.09.2018 (FN)


Max Marks: 10 Duration: 10.00 pm to 11.30 pm

Answer any two questions


1. Explain with the help of neat sketches the complete geometry of a single point cutting tool
2. a) Write the differences between orthogonal cutting and oblique cutting Process
b) Explain about different work holding devices used in Lathe.
3. a) Explain the working principles of shaper, Planer and slotting machines.
b) Describe the crank and slotted link mechanism of a Shaper
4. Explain the working principle of universal milling machine with neat sketch.

CMR INSTITUTE OF TECHNOLOGY,


Kandlakoya (v), Medchal road, Hyderabad – 501 401
Ph.No.08418 – 260720 Fax No. 08418 - 222106

Department of Mechanical Engineering


Metrology & Machine tools
MID TERM – I (Set – 2)

Year / Semester: 3 – 1 (A&B Section) Date: 05.09.2018 (FN)


Max Marks: 10 Duration: 10.00 pm to 11.30 pm

Answer any two questions


1. Explain with the help of neat sketches the complete geometry of a single point cutting tool
2. a) Write the differences between orthogonal cutting and oblique cutting Process
b) Explain about different work holding devices used in Lathe.
3. a) Explain the working principles of shaper, Planer and slotting machines.
b) Describe the crank and slotted link mechanism of a Shaper
4. Explain the working principle of universal milling machine with neat sketch.

S-ar putea să vă placă și