Documente Academic
Documente Profesional
Documente Cultură
About Us
Paktron Pakistan
Technical Services
Contact Us
Search
The purpose of sharing this experiment process is to help fellow students for preparation of their
Physics lab manuals.
Keep reading this post for circuit diagrams and full range of all the values and tables. This experiment
was performed in the Campus Physics lab.
Experiment # 2
Apparatus: Galvanometer, High Resistance Box (HRB), power supply, two one way keys, volt meter (0 –
3 volts), rheostat, connecting wires and sand paper.
Procedure:
1. First of all I found the resistance of Galvanometer (RG) by half deflection method.
2. Then I made the complete circuit, as shown in the diagram, by connecting
Galvanometer, HRB, and Keys with the help of connecting wires.
3. I connected the circuit to the DC power supply through key K1.
4. I adjusted the resistance (R) of HRB in such a way that there were deflections of 30
divisions in galvanometer.
5. Then measured the ‘emf’ of the power supply with volt meter to know the merit of
Galvanometer (K).
6. I adjusted the resistance (R) of HRB in such a way that there were deflections of 28, 26
and 20 divisions in galvanometer to find the mean value of merit of galvanometer.
7. The difference between calculated value of voltage measured by converted
Galvanometer and that measured by volt meter was near to 0.
8. Found the least count of both meters by dividing their Range by Total number of
divisions.
Linkwithin
Posted by www.PAKTRON.net
Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest
Labels: Applied Physics
Mobilink Mobile Internet Settings: GPRS and MMS Configuration
Ufone 3G Setings: Internet and MMS Configuration for All Handsets
PTCL EVO Account Management Portal for EVO, Wingle, Nitro & 3G TAB
Zong Mobile Internet Settings: GPRS and MMS Configuration
Settings to set up EVO 3G internet USB dongle with Wi-Fi Router