Documente Academic
Documente Profesional
Documente Cultură
TO THE WORLD OF
PAINTS
PAINT
A distinction is usually
made between a pigment,
which is insoluble in the
solvent (resulting in a
suspension), and a dye,
which either is itself a liquid
or is soluble in its solvent
(resulting in a solution).
BINDER
PAINT
PRIMER
EMULSION
LACQUER
ENAMEL PAINT
An enamel paint is a paint that dries to
an especially hard, usually glossy,
finish. Enamel paints contain either
glass powder or tiny metal flake
fragments instead of the color
pigments found in standard oil-based
paints. Enamel paint is also mixed
with varnish to increase shine as well
as assist its hardening process.
QDE - Quick Drying Enamel is an alkyd type paint that
provides great durability while being noted as a fast drying
paint. It is formulated to give a tough, durable, beautiful and
high build film on wood and metal.
PAINTS BASED ON APPLICATION
WOOD STAIN
Wood stain is a type of paint that is very "thin," that is,
low in viscosity, and formulated so that the pigment
penetrates the surface rather than remaining in a film on
top of the surface. Stain is predominantly pigment or dye.
PAINTS BASED ON APPLICATION
PU PAINT
• Brush
• Spray Gun
• Roller
FAILURE OF PAINT
The main reasons of paint failure after application on
surface are the applicator and improper treatment of
surface.
Application Defects can be attributed to:
Dilution
This usually occurs when the dilution of the paint is not
done as per manufacturers recommendation. There can be
a case of over dilution and under dilution, as well as dilution
with the incorrect diluent.
Contamination
Foreign contaminants added without the manufacturers
consent which results in various film defects.
FAILURE OF A PAINT
Peeling/Blistering
Most commonly due to improper surface treatment
before application and inherent moisture/dampness
being present in the substrate.
Cracking
Cracking of paint film is due to the unequal expansion
or contraction of paint coats. It usually happens when
the coats of the paint are not allowed to cure/dry
completely before the next coat is applied.
Erosion
Erosion is very quick chalking. It occurs due to external
agents like air,water etc.
DANGERS OF PAINT
GREEN PAINT
Environmental regulations, consumer demand, and
advances in technology led to the development of low-
VOC and zero-VOC paints.These new paints are widely
available and meet or exceed the old high-VOC products
in performance and cost-effectiveness while having
significantly less impact on human and environmental
health.
The Journey has just begun…