Documente Academic
Documente Profesional
Documente Cultură
ELECTRO-
MECHANICAL
SOLUTIONS
I CONNECTORS
I CASES
I HEATSINKS
I HARNESS PRODUCTION
I CABLES & CABLE PROCESSING SYSTEMS
WWW.MICRODIS.NET
RELIABLE CONNECTION
SYSTEMS
CONTENT
CABLING SOLUTIONS FOR AUTOMOTIVE 03
CABLING SOLUTIONS FOR INDUSTRY, DEFENCE, MEDICINE 04
CABLE PROCESSING SYSTEMS 06
HARNESS PRODUCTION 06
CABLES 07
PLASTIC ENCLOSURES 08
ALUMINIUM ENCLOSURES AND HEATSINKS 09
CABLING SOLUTIONS FOR NETWORKS 10
TERMINAL BLOCKS 10
PCB LEVEL CONNECTORS 11
2
CABLING SOLUTIONS FOR
Automotive & Home appliances
Lear's product portfolio includes standard and custom LEAR MAIN PORTFOLIO
terminal & connector systems, with capability ranging from I Leaf spring connection systems
signal to high power. Lear experience in integrating terminal I Pin and socket round connection systems
& connector solutions throughout the vehicle's electrical I Secure contact systems
distribution system allows for maximum reliability while I Flat fuse connection systems
reducing cost.
Lear's capabilities cover the complete value chain SAVOY MAIN PORTFOLIO
—from advanced research and development, through tooling I Chain terminals 2.8-4.8-6.3-7.7-9.3 mm
construction, to extensive manufacturing expertise, allowing I Ring tongue and other solderless
Lear to shorten the product and process development cycle. terminals and splices
From patents filed to finished product, Lear continues to JST MAIN PORTFOLIO
commit its resources to the development of the industry's I Wire to PCB connectors
most technically advanced terminals & connectors. Lear’s I PCB to PCB connectors
focus remains on developing and manufacturing high I Wire to wire connectors
performance, ultra-compact, cost-effective systems, I Solderless terminals and splices
engineered for optimal performance anywhere in the vehicle. I Flat ribbon cables
Battery Cells Connection
Adjustable Suspensions I Control cables
Heatings / Defrosters I Stranded wires
Hybrid Controller
12V Battery
Electric Turbo Charger
DC/DC Converter
Regenerative Breaking
12 VOLT APPLICATIONS
48 VOLT APPLICATIONS
Starters / MGUs
Coolant Pumps
Savoy Technology is the specialist stamping company of the J.S.T is one of the worlds largest
multi-national group Savoy International. In operation since manufacturers of electrical and electronic
1961, Savoy Technology is a supplier of high quality and high connectors. The first products were loose
performance connectors for automotive market and piece terminals, which were introduced
industries. into the market in 1957.
Savoy Technology designs, produces and supplies the Today, JST is a manufacturer of the most
complete range of connectors and hundreds of other special reliable, most technologically advanced
assembly parts. and cost-efficient electromechanical
With more than 45 years in skill design, manufacturing and components.
stamping of innovating electrical connectors, Savoy
Technology is an significant supplier for the automotive
market.
Savoy Technology designs and manufactures a multitude of
products ranging from the most basic to the most complex
electrical connectors, like hermaphrodite sliding terminals
with the highest level of quality.
3
CABLING SOLUTIONS FOR
Industry, Defence, Medicine
FISCHER
FREEDOM™
SERIES
SOLVING CHALLENGES
- AS UNIQUE AS YOU ARE
EXPERTISE Turning your connectivity challenges into
GUIDING YOU FROM CONCEPT TO DELIVERY success stories:
I Sustainable supply chain efficiency I Miniaturization & weight reduction
I Performance via lean manufacturing I Data transmission: more & faster
I Process control & continuous improvement I Extreme sealing & hermeticity
I Complete solutions (connectors & cable
assemblies)
RELIABILITY
GETTING YOU WHERE YOU WANT TO BE COMPLETE SOLUTIONS,
I Products: delivering quality over time ENGINEERING SUPPORT,
I Service: ensuring on-time deliveries RAPID DELIVERY
I Support: responding quickly to your requests
I Vertically integrated solutions
(connectors, components, cables and
INNOVATION assembly)
I Expertise in design, manufacture & test
HELPING YOU WORK SMARTER assemblies
I Technology that speeds up production & delivery I Fast prototyping & production
I Solutions that help you overcome your challenges I High quality guaranteed in low & high
I Customer-first approach that saves you time & money volume projects
4
FISCHER CORE SERIES FISCHER FIBEROPTIC SERIES
1 TO 55 1 TO 4 FIBERS
CONTACTS HYBRID 2+2
Any size I Fully configurable to fulfill each of your Robust A pre-cabled solution ideal for:
needs I Fautless optic performance
Any configuration I High sealing performances for vacuum & High Performance I Indoor, outdoor & extreme applications
Any application underwater applications Easy Cleaning I Up to IP67 (unmated) / IP68 (mated)
I High temperature & chemical resistance I Easy field cleaning
I Connectors and / or cable solutions
2 TO 42
CONTACTS
Rugged I IP68 up to 120m / IP69 / Hermetic Easy Mating I Breakthrough plug & use connectivity
I 360 degree EMC shielding I 360 degree mating freedom & optimized
Compact I High corrosion resistance Easy Cleaning cable management
Lightweight I 10.000 mating cycles Easy Integration I Non-magnetic ball locking with variable force
I IP68 sealed to -20m/24h
I Low profile, right-angled plug
4 TO 24
CONTACTS
5
CABLE PROCESSING SYSTEMS
APPLICATORS PROFESSIONAL
AND PRESSES HAND TOOLS
for crimping of single
MECAL Srl - italian company, established in 1976, terminals and cable ends,
with the aim of supplying the wire harness industry tools for cutting of power cables
with the best crimping equipment. Their leading
products like applicators and presses are WEZAG, German company, founded in 1949. One of
extensively used by the automotive, communication the worldwide leading manufacturers of hand tools.
and IT industry, and wherever a high quality
Separately delivered and terminal dedicated
connection is needed. dies : CS30 system for crimping various types
of contacts / terminals and universal handles.
Possible to use the same dies with WDT
machines for crimping in half automatic cycles.
MECALS CRIMPING
MACHINES PORTFOLIO
I Mechanical applicators for crimping of reeled
terminals with cross-sections up to 25 mm2 PNEUMATIC
I Dies for crimping of loose terminals up to 75 mm
2
PRESSES
I Special applicators for crimping of IDC-rast
connectors (pin by pin) Swiss WDT company (owned by WEZAG) is a
I 4 Points Crimp Applicator, designed to crimp strong supplier of pneumatic solutions for crimping
loose End Sleeve (Tube) Terminals up to 25 mm2 of big cross section loose lugs. WDT-presses with or
I Electromechanical presses with a crimping without special adapters can work together with the
force : 1.5 - 20 T same WEZAG-dies that are dedicated to CS or CK
I Production process analyzers - CFA systems.
I Pull force measurement devices
I Mini laboratories for micrography UP150 - hydraulic press
I Hydraulic press with crimping
Product ID: MRS APPLICATOR
Crimping height 135.8 mm (5.346") force = 150kN
Stroke 40/30 mm (1.575/1.18") I Max. cross-section of
Terminal pitch <27 mm (<1.06")
Terminal thickness <1.2 mm (<0.047")
wires: 400 mm2
Wire section max. 10 mm2 I Built-in analyzer of the
production process (CFA)
I Adjustable crimping height
HARNESS PRODUCTION
IN-HOUSE PRODUCTION OF HARNESSES
based on all typical connectors in the full (with
continuous control of crimping parameters CFA)
and half – automatic process
6
CABLES
PRODUCTS
I Universal enclosures
I Heavy duty enclosures
I Interface supports
I Diecast & metal boxes
I Potting boxes CUSTOMIZATION CAPABILITIES
I 19” subracks I Machining: milling, drilling, cutting and
I Hand held cases countersinking etc.
I Din-Rail boxes I Surface coating and RFI shielding
I Control stations I Printing and engraving
I Desktop & instrument cases I Materials: bespoke colours, material types and
I 19” enclosures flammability
8
ALUMINIUM ENCLOSURES
AND HEATSINKS
CASES
I Miniature aluminium cases
I Design cases THERMAL MANAGEMENT
I Combination cases I Machined extruded heatsinks
I Tube cases I Extruded heatsinks with solder pin
I Desk consoles and shell cases I Heatsinks and fan coolers for processors
I 19” System cases I Lamella heatsinks
I 19” Subracks I Finger shaped and small heatsinks
I 19” Plug-in boxes I Cooling aggregates
I 19” Insert modules I Thermal interface materials
SERVICES
Precision Machining Powder Coating
Fischer Elektronik offers a For the safe use of
wide range of processing electronic casings under
options, especially for difficult ambient
decorative applications. conditions where
All standard cooling anodized or painted
heatsinks and cases and casing surfaces are no
also special front and longer sufficient, first-class
cover plates can be manufactured to suit customers’ surface coating is required.
requirements in terms of decorative design. In addition to its standard product range, Fischer
CNC machining centres and automatic machines Elektronik offers robust and invulnerable powder
are used to ensure optimum processing quality. coatings. In addition to colour and structural
Co m p o n e n t s re ce i ve options for individual surface designs, powder
mechanical surface coatings offer excellent resistance to scratches,
treatment in preparation abrasion and shocks and provide outstanding
for anodizing or galvanic protection against corrosion and chemicals as well
coating such as as good electrical insulation.
chromium or gold, Other important features include a long service life,
c o n s i s t i n g o f highlight fastness and a base material which is
sandblasting, grinding environmentally friendly, as the powder contains
and polishing. neither heavy metals nor solvents.
9
CABLING SOLUTIONS FOR
Networks
I Accessories
TERMINAL BLOCKS
SPRING CLAMP TERMINAL BLOCKS ADVANTAGES
I Solderable I Solderable
I Pluggable I Complete range for different
I Compression-mount installation requirements
I For solid wires and multi-stranded wires I A variety of connecting
2
I Nominal cross section of 0.08 - 2.5 mm technologies
I Centerline 2.5 - 10mm I Additional product designs
(operating options, mounting
SCREW-TYPE TERMINAL BLOCKS flanges etc.)
I Solderable I Solutions for different
I Pluggable connection cross-sections
I Single poles I Color variants at customer
I For solid wires and multi-stranded wires request
I Centerline 3.5 - 10.16 mm I Varying number of poles
I Codeability
IDC TYPE TERMINAL BLOCKS I Customer-specific adaptations
I Solderable possible
I Centerline 3.5 - 10.16 mm
10
PCB LEVEL CONNECTORS
GCT
SIM card connectors
I Hinged
I Push-push
Global Connector Te chnology
I Retainer
I Dual SIM
FFC2B25
I 0.3, 0.5, 1.0 mm pitch Flip Lock
Bottom Contact
Memory SD & uSD USB 2.0 & 3.0 Modular Jack Board-to-board
card connectors connectors connectors connectors
I Hinged I USB C I 4-8 positions I 0.8, 1.0, 1.27, 2.0, 2.54 mm pitch
I Push-push I Micro USB I 4-8 positions loaded I Headers, elevated headers,
I Push-pull I Mini USB I Right angle or vertical sockets, elevated sockets
I Full size USB I THT or SMD style I Horizontal, parallel, perpendicular
I A, B, AB types I THT or SMD style
DC Power Jacks
I THT and SMD I Current ratings from 1.5 A to 8.0 A
I 0.65 mm, 2.00 mm, 2.35 mm & 2.50 mm I Shielded variations in both straight and right
center pin diameters angle orientation
I PCB connectors - male and female headers, contact strips I DIL, PGA, PLCC, transistor sockets
I IDC connectors male & female headers, one & two rows I Flat ribbon cables
I D-SUB connectors
11
E-MECH SOLUTIONS
Bulgaria@microdis.net
Croatia@microdis.net
Czech@microdis.net
Estonia@microdis.net
France@microdis.net*
Germany@microdis.net
Hungary@microdis.net
Latvia@microdis.net
Lithuania@microdis.net
Poland@ microdis.net
Romania@microdis.net Microdis Electronics Sp. z o.o.
Harness production facility
Russia@microdis.net Strzelińska 17
55-010 Żerniki Wrocławskie
Serbia@microdis.net inquiry@microdis.net
tel. +48 71 3010400
Slovakia@microdis.net
Slovenia@microdis.net
Turkey@microdis.net
Ukraine@microdis.net
Europe@microdis.net
Currently the Microdis Group employs over 100 people, with a large number
of electronic engineers, mostly involved in sales and application support.
As a company with an extensive experience in the distribution of electronic
components, and a purchasing center in Germany for many years, we are
able to offer almost any product from a wide variety of electronic
components. We offer also the production of cable harnesses
and programming of crystal oscillators for a customised frequency.
Cooperation with a catalogue distributor provides fast
deliveries (2 days) of a wide range of catalogue products.
We have certificates of quality management
DIN EN ISO 9001:2015 for the distribution of
electronic components.