Documente Academic
Documente Profesional
Documente Cultură
900 to Km
415.600 to Two lane with paved shoulder/Four lane configurations [Ardhapur-Himayatnagar-
Fulsawani-Mahur Road Design Chainage from Km 0/000 (Ardhapur) to Km 64/700(Himayatnagr)
of NH 752I (64.700Km)] in the state of Maharashtra on EPC Mode.
ABSTRACT OF COST
Sr No Decsription Unit Qunatity Amount
Road Work
1
Road Work Including All Typical Cross
Section, Extra Widening, Toll Plaza, Drainage
and Protective Works, Traffic Signs and Road
Apparentunces, Bus Bays, Truck Lay Bays,
Lumpsum 2863577464.6
Major Junction,Minor Junction, Diversion
Work, Miscellenous item like Foot path Kerb,
Utility Pipes, Planting of Trees, Tree Guard,
High Mast Lighting, Passenger Shelter Etc.
2 Reconstruction of Pipe Culvert- 97 Nos, Box
Culvert- 5 Nos- Total 102 Nos ( Total out to No
out - 15 m Width ) 102 130465515.6
3 Cattle Underpass ( 3 M x 2.5 m ) No 8 11926061.89
4
Reconstrunction of Minor Bridge, New
Construction of Minor Bridges ( 16 m Width )
No 24 285068263.8
5 Reconstrunction of Major Bridge, 4 Span x 16
m Width . No 1 30137496.71
Total Road + Structure Works 3321174802.57
Say Rs in Crores 332.12
Name of Project-Upgradation of Ardhapur to Himyatnagar of NH 752I from Km 350.900 to Km 415.600 to Two lane with paved
shoulder/Four lane configurations [Ardhapur-Himayatnagar-Fulsawani-Mahur Road Design Chainage from Km 0/000 (Ardhapur) to
Km 64/700(Himayatnagr) of NH 752I (64.700Km)] in the state of Maharashtra on EPC Mode.
Total
Item No. Description Unit Overall Rate Amount
Quantity
1 Cutting down the road side thorny bushes
(Wali babule etc.) having girth from 5 cm to 20 cm
including removing their roots, stacking and
conveying the materials upto 1.00 km, removing
vegetation including leveling ground as directed
for both sides of road etc. complete As directed by
Engineer in charge. Sqm 537012.3 5.45 2928865.2
2 Cutting down trees including trunks and
branches and stacking the materials neatly with a
lead of 1000 m. as directed with girths for following Diameters
etc. complete As directed by Engineer in
charge
a 30 to 60 cm Girth Nos 1458.0 219.98 320727.9
b 60 cm to 90 cm Girth Nos 437.0 340.88 148962.4
c 90 to 120 cm Girth Nos 436.0 551.76 240568.7
d 120 cm to 150 cm Girth Nos 292.0 2043.43 596682.1
e 150 cm to 180 cm Girth Nos 233.0 4153.22 967700.5
f above 180 cm Girth Nos 58.0 6936.58 402321.6
3 Excavation for roadway in earth soil of all sorts
sand, gravel or soft murum including dressing
section to the required grade, camber and side
slopes and conveying the excavated materials
with all lifts and Leads as required on Site for Transportation of
Material spreading for embankment or stacking As directed by
Engineer in charge. Cum 220661.29 60.90 13438934.44
4 Dismantling of flexible pavements and disposal of dismantled
materials upto a lead of 1000 metres,
stacking serviceable and unserviceable materials
separately. ( By Mechanical Means) Cum 113938.6 249.98 28481805.6
5 Excavation for roadway in hard murum including
dressing section to the required grade, camber
and side slopes and conveying the excavated
materials with all lifts and lead upto a lead as required on Site
for use of Suitable Material and spreading for embankment or
stacking etc complete As directed by Engineer in charge.
Cum 75620.3 74.54 5636587.8
6 Excavation for roadway in hard murum and boulders including
dressing section to the required grade, camber and side slopes
and conveying the excavated materials with all lifts and leads
upto a lead as required on Site for use of Suitable Material and
spreading for embankment or stacking etc complete As directed
by Engineer in charge Cum 4892.7 79.08 386933.0
7 Excavation for roadway in soft rock, including
dressing section to the required grade, camber
and side slopes and conveying the excavated
materials with all lifts and leads as required on site for use of
suitable material and spreading for embankments or stacking
etc complete As directed by Engineer in charge Cum 7715.9 224.52 1732407.2
8 Excavation for roadway In hard rock by controlled blasting
wedging chiseling or line drilling including dressing section to
the required grade, camber and side slopes and conveying the
excavated materials with all lifts upto a lead of 50m. and
spreading for embankments or stacking etc complete As
directed by Engineer in charge. Cum 2069.5 655.39 1356358.0
9 Providing earth work in embankment with approved materials
obtained from excavation
from departmental land or other sources including all lifts and
leads as required for use of suitable material, laying in layers of
20cm to 30cm thickness, breaking clods, dressing to the required
lines, curves, grades and sections, watering and compaction to
95% of standard proctor density etc. complete As directed by
Engineer in charge. With Vibratory Roller.
Cum 68889.7 78.17 5385105.3
10 Providing hard murum of CBR not less than
10% in embankment obtained by departmental
land or other sources including all lifts and leads
as requied on siteto bring the material from aprroved quarry ,
laying in layers of 20cm to 30cm
thickness, breaking clods, dressing to the required
lines, curves, grades and sections, watering and
compaction with vibratory roller etc. complete. Cum 413385.8 667.58 275968115.8
11 Providing hard murum of CBR not less than
10% in embankment obtained by departmental
land or other sources including all lifts and leads
as requied on siteto bring the material from aprroved quarry ,
laying in layers of 20cm to 30cm
thickness, breaking clods, dressing to the required
lines, curves, grades and sections, watering and
compaction with vibratory roller etc. complete. Cum 75189.1 667.58 50194760.6
12 Transportion of Excavated Earth for 3.0 km Lead Distance
from Road Stretch including all Manpower, Machinery,Equipment
Etc Complete. Cum 76371.6 164.71 12579224.1
13 Providing hard murum of CBR not less than
10% in embankment obtained by departmental
land or other sources including all lifts and leads
as requied on siteto bring the material from aprroved quarry ,
laying in layers of 20cm to 30cm
thickness, breaking clods, dressing to the required
lines, curves, grades and sections, watering and
compaction with vibratory roller etc. complete. ( For Subgrade
Work ) Cum 533819.2 667.58 356367024.9
14 Providing hard murum of CBR not less than
10% in embankment obtained by departmental
land or other sources including all lifts and leads
as required on site to bring the material from approved quarry,
laying in layers of 20cm to 30cm
thickness, breaking clods, dressing to the required
lines, curves, grades and sections, watering and
compaction with vibratory roller etc. complete. Cum 7739.0 667.58 5166401.6
15 Providing hard murum of CBR not less than
10% in embankment obtained by departmental
land or other sources including all lifts and leads
as required on site to bring the material from approved quarry,
laying in layers of 20cm to 30cm
thickness, breaking clods, dressing to the required
lines, curves, grades and sections, watering and
compaction with vibratory roller etc. complete. ( For Subgrade
Work ) Cum 1550.3 667.58 1034915.9
16 Granular Sub-base with close Graded Material
(Table-400-1) MORTH-401
a) Plant Mix Method :Construction of granular sub-base by
providing close graded Material,
mixing in a mechanical mix plant at OMC, carriage
of mixed material to work site, spreading in
uniform layers with motor grader on prepared
surface and compacting with vibratory power
roller to achieve the desired density, complete as
per clause 401 ( GRADING - III) Cum 166761.4 1752.25 292207605.7
17 Granular Sub-base with close Graded Material
(Table-400-1) MORTH-401 a) Plant Mix Method :Construction
of granular sub-base by providing close graded Material, mixing
in a mechanical mix plant at OMC, carriage of mixed material to
work site, spreading in
uniform layers with motor grader on prepared
surface and compacting with vibratory power
roller to achieve the desired density, complete as
per clause 401 ( GRADING - I) Cum 85427.0 1752.25 149689373.1
18 Construction of dry lean cement concrete sub base over a
prepared sub-grade with coarse and fine aggregate conforming
to IS:383, the size of coarse aggregate not exceeding 25 mm,
aggregate cement ratio not to exceed 15:1, aggregate gradation
after blending to be as per specifications, cement content not to
be less than 220 Kg/cum, optimum moisture content to be
determined during trial length construction, concrete strength not
to be less than 15 Mpa at 7 days, mixed in a batching plant,
transported to site, for all leads & lifts, laid with a mechanical
paver, compacting with 8-10 tonne vibratory roller, finishing and
curing etc. complete as per direction of Engineer-in-charge.
BR 29 Page No. 129 ( M25 Grade)- For Retaining Wall Cum 9535.7 5817.11 55469997.7
40 Providing and fixing in position Mild steel bar
reinforcement of various diameters for reinforced
cement concrete pile caps, footings,
foundations, slabs, beams, columns, canopies,
stair case, newels, chajjas, lintels, pardis,
copings, fins, arches etc. For Bridge Work as
per detailed designs, drawings and schedules including cutting
bending, hooking the bars,
binding with wires or tack welding and supporting
as required complete. MT 459.3 48702.90 22368176.6
41 Providing and laying weep holes of 100mm
diameter AC / PVC as per drawing for abutment,
returns, return walls etc. complete As directed by
Engineer in charge. Rmt 6088.3 220.89 1344853.8
42 Providing dry rubble stone pitching including all
materials, hand packing etc. complete above
23cm thick including packing with quarry spalls
and hard murum etc complete As directed by
Engineer in charge ( For Protection Work ) Cum 4875.0 2924.00 14254500.0
43 Providing and applying thermoplastic reflective
paint of approved colour or compound for traffic
lane strips of 3 mm thick of pigment 10%, on
clean, dry and good road surface with 30 to 40
percent glass beads, 20 percent binder and 40
percent of filler material etc complete. (Rate is for
actual painted length). For 10 cm width of strip Sqm 15043.2 609.03 9161733.3
44 Supplying & Fixing of Molded Shank Raised Pavement
Markers / Cat's Eye made of polycarbonate and ABS moulded
body and reflective panels with micro prismatic lens capable of
providing total internal reflection of the light entering the lens face
and shall support a load of 16000 kg tested in accordance to
ASTM D 4280 Type H and complying to Specifications of
Category A of MORTH Circular No RW/NH/33023/10-97 – DO III
Dt 11.06. 1997. The height, width and length shall not exceed 50
mm, 100 mm and 102 +/- 2 mm and with minimum reflective
area of 13 Sqcm on each side and the slope to the base shall be
35 +/- 5 degree. The strength of detachment of the integrated
cylindrical shanks, (of diameter not less than 19 +/- 2 mm and
height not less than 30+/- 2 mm) from the body is to be a
minimum value of 500 Kg. Fixing will be by drilling holes on the
road for the shanks to go inside, without nails and using epoxy
resin based adhesive as per manufacturer‟s recommendation
and complete.
Spec.No: As directed by the engineer incharge
Nos 6016.3 463.59 2789112.0
45 Providing and applying two coats of lead/zinc base oil
paint/bituminous paint of approved colour and shadeto old
wood work and fiber boards previously painted including if
necessary scaffolding, preparing the surface excluding priming
coat complete. Sqm 7542.0 40.00 301679.0
46 Providing RCC 5th KM stones on NH, SH and
MDR etc. including painting, numbering etc.
complete as per IRC design for highway 5th KM
stones and fixing in standard size CC 1:3:6, block
complete. Nos 26.0 1737.10 45164.6
47 Providing RCC 1:2:4 ordinary stones including
painting, numbering etc. complete for NH way, SH
way and MDR way as per IRC design for highway
KM stones and fixing in standard size CC 1:3:6,
block complete. Nos 106.0 1124.43 119189.6
48 Providing and fixing 200m stone as per IRC
design including painting, numbering, fixing in
standard size CC 1:3:6, block complete. Nos 516.0 510.86 263603.8
49 Providing and fixing RCC 1:2:4 boundary
stones as per type design including painting,
numbering, fixing in 150mm x 150mm x 900mm
size CC 1:3:6, block complete Nos 130.0 276.34 35924.2
50 Boudry Stone ( 200 m ) Nos 520.0 358.15 186238.0
51 Providing and fixing informatory sign boards in
square or rectangular shape of any size made
out of 14 gauge (2 mm) thick aluminum sheet
bonded with green retro reflective sheeting of
engineering grade having pressure sensitive / heat
activated adhesive, white retro reflective cutout
border and messages having pressure sensitive
adhesive or screen printing of green transparent
colour over white retro reflective sheeting having
border and messages in white background
including M. S. angle iron frame of size 35 mm X
35 mm X 3 mm and two M. S. angle iron post of
size 65 mm X 65 mm X 6 mm, 3.65 m long, duly
painted with one coat of epoxy primer and two
coats of epoxy finish paint having alternate black
and white bands of 25 cm width including G.I.
fixtures etc; fixing the boards in 1:4:8 concrete
block of size 60cm X 60cm X 75cm including
transportation etc; complete. Sqm 349.2 13529.56 4724638.8
52 Providing and fixing Cautionary Warning sign
board having shape of an circle 60 dia. sides
made out of 16 gauge (1.6mm.) thick M.S. sheet
painted with one coat of zinc chromate stoving
prime and two coats of white stove enamel paint
and red border on front side and gray stove
enamel on back side, symbols with cutout of red
retro reflective sheeting of engineering grade,
including one M.S. angle post of size 65 mm X 65
mm X 6mm, 3.65 m. long duly painted with
synthetic enamel paint alternate black and white
bands of 25 cm width including G. I. fixtures etc.
and fixing the board in 1:4:8 concrete block of
size 60 cm X 60 cm X 75 cm including
transportation etc. complete. Spec. No.: - IRC-67
1977 and MOST Circular No. RW/NH –
33023/31/88 D.O.III Dated 2/11-5-94. Nos 964.1 3808.71 3671873.9
53 Providing and fixing informatory sign boards in
circular shape of 60cm dia made out of 14
gauge (2 mm) thick aluminum sheet bonded with
white retro reflective sheeting of engineering
grade having pressure sensitive / heat activated
adhesive, red retro reflective cutout border having
pressure sensitive adhesive front and back side
painted with one coat of epoxy primer and two
coats of epoxy finish paint including an one no. of
M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.65 m long, duly painted with one coat of
red oxide primer and two coats of enamel paint
having alternate black and white bands of 25 cm
width including G.I. fixtures etc; fixing the boards
in 1:4:8 concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Spec.
No.: - IRC-67 1977 and MOST Circular No.
RW/NH –33023/31/88 D.O.III Dated 2/11-5-94. Nos 150.0 5011.32 751531.6
54 Supplying and installation of delineators (road way indicators .
hazard markers, object markers) 80-100 cm high above
ground level. painted black and white in 15 cm wide strips, fitted
with 80x100 mm rectangular or 75 mm dia. circular reflectorised
panels at the top, buried or pressed into the ground and
conforming to IRC 79 and the drawings.
Nos 498.0 858.10 427333.8
55 Cutting down the road side thorny bushes
(Wali babule etc.) having girth from 5 cm to 20 cm
including removing their roots, stacking and
conveying the materials upto 1.00 km, removing
vegetation including leveling ground as directed
for both sides of road etc. complete As directed by
Engineer in charge. Sqm 7947.5 5.45 43345.7
56 Providing and fixing factory made hydraulically pressed,
Mechanically vibrated and compacted precast interlocking
cement concrete paving blocks in specified grade of approved
size and shape as specified in IS 15658 - 2006 in grey cement
and top surface 10 mm in white cement with colour pigment
including cost of all materials manufacturing, curing,
transportation of blocks to work site including loading, unloading
and stacking as directed, laying paving blocks in position over a
prepared bed of sand 50 mm thick including necessary
excavation in all strata, spreading blindage of fine sand over the
prepared bed, compacting blocks by plate vibrator etc. complete.
Heavy Traffice, M 50, 100 mm thick
Sqm 2872.0 930.52 2672445.5
57 Providing and laying in situ M-25 cement concrete of trap
/granite /quartzite /gneiss metal for reinforced cement
concrete work of ballast walls, kerbs etc. including centering,
scaffolding, compaction, form work, finishing and curing
(excluding reinforcement) etc. complete As directed by Engineer
in charge.(upto 4m height above bed) BR 50 Page No. 143.
Cum 520.0 5736.66 2983063.2
58 Providing and fixing informatory sign boards in square or
rectangular shape of any size made out of 14 gauge (2 mm)
thick aluminum sheet bonded with green retro reflective sheeting
of engineering grade having pressure sensitive I heat activated
adhesive , white retro reflective cutout border and messages
having pressure sensitive adhesive or screen printing of green
transparent colour over white retro reflective sheeting having
border and messages in white background including M. S.
angle iron frame of size 35 mm X 35 mm X 3 mm and two M. S.
angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long,
duly painted with one coat of epoxy primer and two coats of
epoxy finish paint having alternate black and white bands of 25
cm width including G.I. fixtures etc; fixing the boards in 1:4:8
concrete block of size 60cm X 60cm X 75cm including
transportation etc; complete.
Sqm 11.0 13529.56 148825.2
59 Providing and fixing Cautionary Warning 7 RSC- sign board
having shape of an circle 60 1 dia. sides made out of 16 gauge
(1.6mm.) thick M.S. sheet painted with one coat of zinc chromate
stoving prime and two coats of white stove enamel paint and red
border on front side and gray stove enamel on back side,
symbols with cutout of red retro reflective sheeting of
engineering grade, including one M.S. angle post of size 65 mm
X 65 mm X 6mm, 3.65 m. long duly painted with synthetic
enamel paint alternate black and white bands of 25 cm width
including G. I. fixtures etc. and fixing the board in 1:4:8 concrete
block of size 60 cm X 60 cm X 75 cm including transportation
etc. complete. Spec. No.: - IRC-67 1977 & MOST Circular No.
RW/NH -33023/31/88 D.0.111 Dated 2/11 5-94.
Each 22.0 3808.71 83791.6
60 Supplying and installation of delineators (road way
indicators, hazard markers, object markers) 80-
100 cm high above ground level, painted black
and white in 15 cm wide strips, fitted with 80x100
mm rectangular or 75 mm dia, circular
reflectorised panels at the top, buried or pressed
into the ground and conforming to IRC 79 and the
drawings. Each 11.0 858.10 9439.1
61 Providing and fixing informatory sign boards in
circular shape of 60cm dia made out of 14
gauge (2 mm) thick aluminum sheet bonded with
white retro reflective sheeting of engineering
grade having pressure sensitive / heat activated
adhesive, red retro reflective cutout border having
pressure sensitive adhesive front and back side
painted with one coat of epoxy primer and two
coats of epoxy finish paint including an one no. of
M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.65 m long, duly painted with one coat of
red oxide primer and two coats of enamel paint
having alternate black and white bands of 25 cm
width including G.I. fixtures etc; fixing the boards
in 1:4:8 concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Spec.
No.: - IRC-67 1977 and MOST Circular No.
RW/NH –33023/31/88 D.O.III Dated 2/11-5-94. Each 11.0 5011.32 55124.5
62 Providing, erecting and maintaining barriers as per drawing,
signs, markings, flags, lights, and providing flag men etc as
directed by the Engineer for information and safety of traffic on
section of highway under construction for entire period of
construction till its completion as per Technical Specification
Clause 112. Lumpsum 1.0 5000000.00 5000000.0
63 Utility Pipe 0.0 0.0
64 Providing and laying of a reinforced cement concrete pipe duct,
600/ 900 mm dia, across the road (new construction), extending
from drain to drain in cuts and toe of slope to toe of slope in fills,
constructing head walls at both ends, providing a minimum fill of
granular material over top and sides of RCC pipe as per IRC:98-
1997, bedded on a 0.3 m thick layer of granular material free of
rock pieces, outer to outer distance of pipe at least half dia of
pipe subject to minimum 450 mm in case of double and triple row
ducts, joints to be made leak proof, invert level of duct to be
above higher than ground level to prevent entry of water and dirt,
all as per IRC: 98 - 1997 and approved drawings. RCC 600 mm
Dia NP3 Class
Rmt 7410.0 3208.77 23776985.7
65 RCC Diameter 900 mm NP4 Rmt 1170.0 6822.05 7981792.7
66 Planting of trees by the road side in 0.60 m dia holes, 1 m deep
dug in the ground, mixing the soil with decayed farm yard/sludge
manure, planting the saplings, backfilling the trench, watering,
fixing the tree guard and maintaining the plants for one year.
Nos 2916.0 1512.00 4408992.0
67 Provision of High mast Lighting at, major junctions, truck laybye
as per specification or as per the instruction of the Authority.
Nos 10.0 300000.00 3000000.0
68 Construction of passenger shelter at pick-up bus stop as per
drawing and additional Technical Specification and as directed
by the Engineer. Nos 10.0 200000.00 2000000.0
69 Planting of trees by the road side in 0.60 m dia holes, 1 m deep
dug in the ground, mixing the soil with decayed farm yard/sludge
manure, planting the saplings, backfilling the trench, watering,
fixing the tree guard and maintaining the plants for one year.
Nos 2916.0 625.20 1823083.2
70 Providing and casting in situ or precast tapering R.C.C. 1:2:4
Kerbs type-III as per Drg. No. 13 dt. 20-4-79, tapering (9 inch x
6 inch ) both side embedded 6 inch below ground level finished
neatly with C.M. 1:2 with 4 Nos. 6mm dia. bars and 6mm dia.
strips at 18 inch C/c setting the same in C.M. 1:2, painting the
exposed surface of the kerbs with 2 coats of road marking paint
of approved quality and colour including the required excavated
stuff any where in city and redoing the surface as specified and
directed for single line dividers.Spec : MORTH 409
Rmt 9204.0 670.50 6171282.0
71 Providing Automatic Toll Collection Systems (including Barrier)
Nos 6.0 187500.00 1125000.0
72 Vehicle Counting cum Classifier (VCS) Unit Nos 6.0 93750.00 562500.0
73 Providing Toll Booths including toll collector, computer, printer,
cash box, with provision of light, fan, and air conditioner and
other equipments Nos 6.0 258125.00 1548750.0
74 Generator and power backup facility Nos 1.0 1875000.00 1875000.0
75 Roof Truss and Canopy MT 0.0 0.00 0.0
76 Structural Steel for Vertical Post MT 173.2 65000.00 11260340.0
77 Roof Truss for Canopy MT 966.0 6000.00 5796000.0
78 Administrative building and furnitures Sqm 250.0 12000.00 3000000.0
79 Traffic Aid Post 0.0 0.0
80 Building Sqm 100.0 12500.00 1250000.0
81 Highway Patrol Vehicle Nos 1.0 1062500.00 1062500.0
82 Medical Aid Post 0.0 0.0
83 Building Sqm 100.0 12500.00 1250000.0
84 Ambulance Nos 1.0 1500000.00 1500000.0
85 Traffic Sign 0.0 0.0
86 Lightings 0.0 0.0
87 Interior Lighting -Fluorescent lamps (200-300Lux) Nos 14.0 6375.00 89250.0
88 Highmast lighting 30m with average 40lux Nos 1.0 382500.00 382500.0
89 2-Arm Street light post (on either side 500m before toll laza)-
10m height Nos 20.0 47500.00 950000.0
90 1-Arm Street light post Nos 6.0 31250.00 187500.0
91 Canopy Lighting Nos
92 a.) Halide Lamps (100 Lux by 150Watt) Nos 12.0 11500.00 138000.0
93 b.) Halogen Lamps(1000 Watt) - At Canopy Nos 12.0 3875.00 46500.0
94 Providing Fire fighting Equipments Nos 1.0 150000.00 150000.0
GROSS AMOUNT OF ROAD WORK INCLUDING ALL OTHER WORKS 2863577465
Name of Project-Upgradation of Ardhapur to Himyatnagar of NH 752I from Km 350.900 to Km 415.600 to Two lane with paved shoulder/Four lane configurations
[Ardhapur-Himayatnagar-Fulsawani-Mahur Road Design Chainage from Km 0/000 (Ardhapur) to Km 64/700(Himayatnagr) of NH 752I (64.700Km)] in the state of
Maharashtra on EPC Mode.
CATTLE UNDERPASS
MINOR BRIDGE
MAJOR BRIDGE