Documente Academic
Documente Profesional
Documente Cultură
MRFUd
Contents
5.1.1.6.8.2.16 Typical Power Configuration for MRFUd
and Table 2 provide the typical power configuration for the MRFUd (GSM, 900
Table 1
MHz/1800 MHz).
and Table 4 provide the typical power configuration for the MRFUd (UMTS, 900
Table 3
MHz/2100 MHz).
and Table 6 provide the typical power configuration for the MRFUd (LTE FDD, 900
Table 5
MHz/1800 MHz).
Table 7 and Table 8 provide the typical power configuration for the MRFUd (LTE FDD, 2100
MHz).
and Table 10 provide the typical power configuration for the MRFUd (GU non-MSR,
Table 9
900 MHz).
Table 11 and Table 12 provide the typical power configuration for the MRFUd (GU MSR, 900
MHz).
and Table 14 provide the typical power configuration for the MRFUd (GL MSR, 900
Table 13
MHz/1800 MHz).
and Table 16 provide the typical power configuration for the MRFUd (UL MSR, 900
Table 15
MHz/2100 MHz).
NOTE:
If the power sharing feature is activated, assume that UEs in a cell are randomly located.
If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module is
placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the gains of
dynamic power sharing. In most cases, network plans are designed on the basis of power specifications of
dynamic power sharing.
Before activating the dynamic power sharing feature, enable the DTX and power control functions. In GBSS8.1,
the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell, GBFD-
114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501 Enhanced
Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing feature can be
used together with these features. However, the dynamic power sharing feature currently cannot be used together
with the GBFD-117002 IBCA (Interference Based Channel Allocation), GBFD-117001 Flex MAIO, GBFD-
118701 RAN Sharing, and GBFD-114001 Extended Cell features in GBSS8.1, GBSS9.0, and later versions.
For the MRFUd working in GSM mode, the maximum output power per carrier is 80 W when the S1 or S2
configuration is used. If the output power of 60 W or 80 W is required, the corresponding power license must be
purchased.
Table 1 Output power for the MRFUd (GSM, 900 MHz/1800 MHz)
Working Mode Total Number of GSM Output Power per Output Power per GSM
Carriers GSM Carrier (W) Carrier with Dynamic
Power Sharing (W)
GSM 1 80 80
2 80 80
3 40 40
4 40 40
5 27 30
6 27 30
7 20 27
8 20 27
Table 2 Configuration of MRFUd PAs (GSM, 900 MHz/1800 MHz)
GSM 1 1 80 80 0 0 0
GSM 2 1 80 80 1 80 80
GSM 3 2 40 40 1 40 40
GSM 4 2 40 40 2 40 40
GSM 5 3 27 30 2 27 30
GSM 6 3 27 30 3 27 30
GSM 7 4 20 27 3 20 27
GSM 8 4 20 27 4 20 27
Table 3 Output power for the MRFUd (UMTS, 900 MHz/2100 MHz)
Working Mode Total Number of UMTS Carriers Output Power per UMTS Carrier
(W)
UMTS 1 80
2 80
3 40
4 40
5 25
6 25
1 (MIMO) 2x40
Table 3 Output power for the MRFUd (UMTS, 900 MHz/2100 MHz)
Working Mode Total Number of UMTS Carriers Output Power per UMTS Carrier
(W)
2 (MIMO) 2x40
3 (MIMO) 2x25
4 (MIMO) 2x20
UMTS 1 1 80 0 0
UMTS 2 1 80 1 80
UMTS 3 2 40 1 40
UMTS 4 2 40 2 40
UMTS 5 3 25 2 25
UMTS 6 3 25 3 25
UMTS 1 (MIMO) 1 40 1 40
UMTS 2 (MIMO) 2 40 2 40
UMTS 3 (MIMO) 3 25 3 25
UMTS 4 (MIMO) 4 20 4 20
NOTE:
(a) indicates that the configuration is supported from SRAN8.0 and is supported only on the 1800 MHz frequency
band.
Table 5 Output power for the MRFUd (LTE FDD, 900 MHz/1800 MHz)
Working Mode Total Number of LTE Output Power per LTE Bandwidth of LTE FDD
FDD Carriers FDD Carrier (W) Carrier (MHz)
LTE FDD 1 1 60 1 60
(MIMO)
LTE FDD 1 1 40 1 40
(MIMO)
LTE FDD 2 2 40 2 40
(MIMO)
Table 7 Output power for the MRFUd (LTE FDD, 2100 MHz)
Working Mode Total Number of LTE Output Power per LTE Bandwidth of LTE FDD
FDD Carriers FDD Carrier (W) Carrier (MHz)
LTE FDD 1 1 60 1 60
(MIMO)
LTE FDD 2 2 40 2 40
(MIMO)
Table 9 Output power for the MRFUd (GU non-MSR, 900 MHz)
Working Mode Total Number of Total Number of Output Power per Output Power per
GSM Carriers UMTS Carriers GSM Carrier (W) UMTS Carrier
(W)
GSM + UMTS 1 1 80 80
2 1 40 80
3 1 27 80
4 1 20 80
5 1 16 80
6 1 12 80
1 2 80 40
2 2 40 40
3 2 27 40
4 2 20 40
5 2 16 40
6 2 12 40
1 3 80 25
2 3 40 25
Table 9 Output power for the MRFUd (GU non-MSR, 900 MHz)
Working Mode Total Number of Total Number of Output Power per Output Power per
GSM Carriers UMTS Carriers GSM Carrier (W) UMTS Carrier
(W)
3 3 27 25
4 3 20 25
5 3 16 25
1 4 80 20
2 4 40 20
3 4 27 20
4 4 20 20
GSM 1 + 1 80 0 0 0 0 1 80
UMTS 1
GSM 2 + 2 40 0 0 0 0 1 80
UMTS 1
GSM 3 + 3 27 0 0 0 0 1 80
UMTS 1
GSM 4 + 4 20 0 0 0 0 1 80
UMTS 1
GSM 5 + 5 16 0 0 0 0 1 80
UMTS 1
GSM 6 + 6 12 0 0 0 0 1 80
UMTS 1
Table 10 Configuration of MRFUd PAs (GU non-MSR, 900 MHz)
GSM 1 + 1 80 0 0 0 0 2 40
UMTS 2
GSM 2 + 2 40 0 0 0 0 2 40
UMTS 2
GSM 3 + 3 27 0 0 0 0 2 40
UMTS 2
GSM 4 + 4 20 0 0 0 0 2 40
UMTS 2
GSM 5 + 5 16 0 0 0 0 2 40
UMTS 2
GSM 6 + 6 12 0 0 0 0 2 40
UMTS 2
GSM 1 + 1 80 0 0 0 0 3 25
UMTS 3
GSM 2 + 2 40 0 0 0 0 3 25
UMTS 3
GSM 3 + 3 27 0 0 0 0 3 25
UMTS 3
GSM 4 + 4 20 0 0 0 0 3 25
UMTS 3
GSM 5 + 5 16 0 0 0 0 3 25
UMTS 3
GSM 1 + 1 80 0 0 0 0 4 20
UMTS 4
GSM 2 + 2 40 0 0 0 0 4 20
UMTS 4
Table 10 Configuration of MRFUd PAs (GU non-MSR, 900 MHz)
GSM 3 + 3 27 0 0 0 0 4 20
UMTS 4
GSM 4 + 4 20 0 0 0 0 4 20
UMTS 4
NOTE:
(b) indicates that the configuration is supported from SRAN7.0 and is supported only on the 900 MHz frequency
band.
(c) indicates that the configuration is supported from SRAN8.0.
Table 11 Output power for the MRFUd (GU MSR, 900 MHz)
Working Mode Total Number of Total Number of Output Power per Output Power per
GSM Carriers UMTS Carriers GSM Carrier (W) UMTS Carrier
(W)
2 1 40 40
3 1 40 40
4 1 27 40
5 1 27 20
5 1 25 30
5 1 20 40
6 1 20 40
Table 11 Output power for the MRFUd (GU MSR, 900 MHz)
Working Mode Total Number of Total Number of Output Power per Output Power per
GSM Carriers UMTS Carriers GSM Carrier (W) UMTS Carrier
(W)
7 1 20 20
7 1 16 30
1 2 40 40
2 2 40 40
3 2 30 20
3 2 25 30
3 2 20 40
4 2 30 20
4 2 25 30
4 2 20 40
5 2 20 20
6 2 20 20
1 1 (MIMO) 40 2x40
2 1 (MIMO) 40 2x40
3 1 (MIMO) 20 2x40
3 1 (MIMO) 25 2x30
4 1 (MIMO) 20 2x40
Table 11 Output power for the MRFUd (GU MSR, 900 MHz)
Working Mode Total Number of Total Number of Output Power per Output Power per
GSM Carriers UMTS Carriers GSM Carrier (W) UMTS Carrier
(W)
4 1 (MIMO) 25 2x30
4 1 (MIMO) 30 2x20
1 2 (MIMO) 20 2x30
1 2 (MIMO) 40 2x20
2 2 (MIMO) 20 2x30
2 2 (MIMO) 40 2x20
3 2 (MIMO) 15 2x20
4 2 (MIMO) 15 2x20
GSM 2 + 1 40 1 40 1 40 0 0
UMTS 1
GSM 3 + 2 40 0 0 1 40 1 40
UMTS 1
GSM 4 + 3 27 0 0 1 27 1 40
UMTS 1
Table 12 Configuration of MRFUd PAs (GU MSR, 900 MHz)
GSM 5 + 3 27 0 0 2 27 1 20
UMTS 1
GSM 5 + 3 25 0 0 2 25 1 30
UMTS 1
GSM 5 + 4 20 0 0 1 20 1 40
UMTS 1
GSM 6 + 4 20 0 0 2 20 1 40
UMTS 1
GSM 7 + 4 20 0 0 3 20 1 20
UMTS 1
GSM 7 + 5 16 0 0 2 16 1 30
UMTS 1
GSM 1 + 1 40 1 40 0 0 1 40
UMTS 2
GSM 2 + 1 40 1 40 1 40 1 40
UMTS 2
GSM 3 + 2 30 1 20 1 30 1 20
UMTS 2
GSM 3 + 2 25 1 30 1 25 1 30
UMTS 2
GSM 3 + 2 20 1 40 1 20 1 40
UMTS 2
Table 12 Configuration of MRFUd PAs (GU MSR, 900 MHz)
GSM 4 + 2 30 1 20 2 30 1 20
UMTS 2
GSM 4 + 2 25 1 30 2 25 1 30
UMTS 2
GSM 4 + 2 20 1 40 2 20 1 40
UMTS 2
GSM 5 + 4 20 0 0 1 20 2 20
UMTS 2
GSM 1 + 1 40 1 40 0 0 1 40
UMTS 1
(MIMO)
GSM 2 + 1 40 1 40 1 40 1 40
UMTS 1
(MIMO)
GSM 3 + 2 20 1 40 1 20 1 40
UMTS 1
(MIMO)
GSM 3 + 2 25 1 30 1 25 1 30
UMTS 1
(MIMO)
GSM 4 + 2 20 1 40 2 20 1 40
UMTS 1
(MIMO)
GSM 4 + 2 25 1 30 2 25 1 30
UMTS 1
(MIMO)
GSM 4 + 2 30 1 20 2 30 1 20
UMTS 1
(MIMO)
GSM 1 + 1 20 2 30 0 0 2 30
UMTS 2
(MIMO)
GSM 1 + 1 40 2 20 0 0 2 20
UMTS 2
(MIMO)
GSM 2 + 1 20 2 30 1 20 2 30
UMTS 2
(MIMO)
GSM 2 + 1 40 2 20 1 40 2 20
UMTS 2
(MIMO)
Table 12 Configuration of MRFUd PAs (GU MSR, 900 MHz)
GSM 3 + 2 15 2 20 1 15 2 20
UMTS 2
(MIMO)
GSM 4 + 2 15 2 20 2 15 2 20
UMTS 2
(MIMO)
NOTE:
(d) indicates that the configuration is supported from SRAN7.0 and is supported only on the 1800 MHz
frequency band.
(e) indicates that the configuration is supported from SRAN8.0 and is supported only when the base station
works at a temperature 5°C lower than the standard temperature.
Table 13 Output power for the MRFUd (GL MSR, 900 MHz/1800 MHz)
Working Mode Total Total Number Output Power Output Power Bandwidth of
Number of of LTE FDD per GSM per LTE FDD LTE FDD
GSM Carriers Carriers Carrier (W) Carrier (W) Carrier (MHz)
Working Mode Total Total Number Output Power Output Power Bandwidth of
Number of of LTE FDD per GSM per LTE FDD LTE FDD
GSM Carriers Carriers Carrier (W) Carrier (W) Carrier (MHz)
GSM 1 + LTE 1 40 1 40 0 0 1 40
FDD 1
(MIMO)
GSM 1 + LTE 1(d) 30(d) 1(d) 50(d) 0(d) 0(d) 1(d) 50(d)
FDD 1
(MIMO)(d)
GSM 2 + LTE 1 40 1 40 1 40 1 40
FDD 1
(MIMO)
GSM 2 + LTE 1(d) 30(d) 1(d) 50(d) 1(d) 30(d) 1(d) 50(d)
FDD 1
(MIMO)(d)
GSM 3 + LTE 2 30 1 20 1 30 1 20
FDD 1
(MIMO)
GSM 3 + LTE 2 25 1 30 1 25 1 30
FDD 1
(MIMO)
GSM 3 + LTE 2 20 1 40 1 20 1 40
FDD 1
(MIMO)
GSM 4 + LTE 2 20 1 40 2 20 1 40
FDD 1
(MIMO)
GSM 4 + LTE 2 25 1 30 2 25 1 30
FDD 1
(MIMO)
Table 14 Configuration of MRFUd PAs (GL MSR, 900 MHz/1800 MHz)
GSM 4 + LTE 2 30 1 20 2 30 1 20
FDD 1
(MIMO)
GSM 5 + LTE 3 16 1 30 2 16 1 30
FDD 1
(MIMO)
GSM 5 + LTE 3 20 1 20 2 20 1 20
FDD 1
(MIMO)
GSM 6 + LTE 3 15 1 20 3 15 1 20
FDD 1
(MIMO)
GSM 6 + LTE 3(d) 16(d) 1(d) 30(d) 3(d) 16(d) 1(d) 30(d)
FDD 1
(MIMO)(d)
GSM 2 + LTE 1(e) 20(e) 2(e) Carrier 1(e) 20(e) 2(e) Carrier
FDD 2 1: 1:
(MIMO)(e) 20(e) 20(e)
Carrier Carrier
2: 2:
40(e) 40(e)
NOTE:
(g) indicates that the configuration is supported only on the 900 MHz frequency band.
(h) indicates that the configuration is supported only on the 2100 MHz frequency band.
Table 15 Output power for the MRFUd (UL MSR, 900 MHz/2100 MHz)
Working Mode Total Total Number Output Power Output Power Bandwidth of
Number of of LTE FDD per UMTS per LTE FDD LTE FDD
UMTS Carriers Carrier (W) Carrier (W) Carrier (MHz)
Carriers
UMTS 1 + 1 40 1 40 0 0 1 40
LTE FDD 1
(MIMO)
UMTS 2 + 1 40 1 40 1 40 1 40
LTE FDD 1
(MIMO)
Table 16 Configuration of MRFUd PAs (UL MSR, 900 MHz/2100 MHz)
UMTS 3 + 2 20 1 40 1 20 1 40
LTE FDD 1
(MIMO)
UMTS 4 + 2 20 1 40 2 20 1 40
LTE FDD 1
(MIMO)