Documente Academic
Documente Profesional
Documente Cultură
Technical specifications
1
Return to Index
Technical specifications
New Gen
Driveaway Antennas
NewGen Drive-Aways
Technical specifications
Ka-75V
Technical specifications
The iNetVu® Ka-75V Drive-Away Antenna is a 75 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for Broadband
Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite acquisition within
minutes, anytime anywhere.
“Authorized for use on ViaSat Exede® Enterprise and on KA-SAT NEWSSPOTTER NEWSGATHERING service by Eutelsat”
Features
• One-Piece, high surface accuracy, offset feed, steel reflector
• Heavy duty feed arm now supports both type of Transceivers:
Standard Tria and new eTRIA
• Designed to work with the iNetVu® 7024C Controller
• Works seamlessly with the world’s emerging commercial
ViaSat/KA-SAT satellite Surfbeam II/PRO Auto-acquire
modems
• Auto beam select on KA-SAT Tooway services
• 2 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires Ka-band
satellite within 2 minutes
• Locates satellites using the most advanced satellite
acquisition methods
• Supports Skyware Global 75 cm Ka antenna
• Standard 2 year warranty
EXEDE® ENTERPRISE
AU T H O R I Z E D E Q U I P M E N T
Application Versatility
If you operate in Ka-band, the Ka-75V system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation mobile Ka terminal delivers affordable broadband
Internet services (High-speed access, Video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
http://www.eutelsat.com/files/contributed/support/pdf/Eutelsat_Broadband_Services.pdf (p.12)
http://www.eutelsat.com/files/contributed/products/pdf/KA-SAT-SNG-terminals.pdf
Ka-75V
Technical specifications
Mechanical RF Interface
Reflector 75cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base Connector
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 90º Mounting Plate L: 131 cm (51.6”)
Polarization Circular, Auto-switching W: 45 cm (17.7”)
Elevation Deploy Speed Variable , 10º/sec typ. Stowed Reflector Ext. Dims L: 145 cm (57”)
Azimuth Deploy Speed Variable 5º/sec typ. W: 76 cm (29.9”)
Peaking Speed 0.1º/sec H: 30 cm (11.8”)
Deployed Height 122 cm (48”)
Platform Weight 52 kg (115 lbs)
Environmental
Survival Motors
Wind Deployed 160 km/h (100 mph)
Wind Stowed 225 km/h (140 mph) Electrical Interface 24VDC 8 Amp (Max.)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational
Wind 72 km/h (45 mph) Shipping Weights & Dimensions*
Temperature -30ºC to 55ºC (-22°F to 130°F)
System, with controller and standard set of cables, accessories
Thermal Test per MIL-STD-810F, Method 501.4/502.4, High/Low Temperatures Crate (including Reflector, Feed/Transceiver):
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked 185.5 cm × 112 cm × 68.5 cm (73” × 44” × 27”), 127 kg (280 lbs)
Shock Test per IEC 60068-2-27, Appendix A,Water Ingress per IP-66 Crate (no Reflector, no Feed/Transceiver):
185.5 cm × 112 cm × 68.5 cm (73” × 44” × 27”), 118 kg (260 lbs)
Electrical * The shipping weights/dims can vary for particular shipments depending on actual
Rx & Tx Cable 2 RG6 cables - 10 m (33 ft) each system configuration, quantity, packaging materials and special requirements
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency (GHz) 18.30 - 20.20 28.10 - 30.00
Feed Interface (Circular) RG6 RG6
Nominal G/T 17.5 dB/K
Nominal EIRP 48.4 dBWi
981
Technical specifications
The iNetVu® 981 Drive-Away Antenna is a 98 cm Ku-band auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for
Broadband Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite
acquisition within minutes, anytime anywhere.
Application Versatility
If you operate in Ku-band, the 981 system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. The system is also field upgradable to Ka-band. Ideally suited for industries
such as Oil & Gas Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and
many others.
981
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type / N Type (optional)
Deployment Sensors GPS antenna Axis transition Twist-Flex Waveguide
Compass ± 2º
Tilt sensor ± 0.1º
Physical
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 90º Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Elevation Deploy Speed Variable 2º/sec typ. Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ. (without reflector pod) H: 30 cm (11.8”)
Peaking Speed 0.1º/sec Stowed Reflector Ext. Dims L: 178.8 cm (70.4”) W: 113 cm (44.5”)
(with reflector pod) H: 30 cm (11.8”)
Deployed Height 151 cm (59.5”)
Environmental Platform Weight 54 kg (119 lbs)
Reflector back cover 2.27 kg (5 lbs)
Survival Pod alone 6.8 kg (15 lbs)
Wind Deployed 160 km/h (100 mph) Total Platform Weight 56.3 kg (124 lbs)
Wind Stowed 225 km/h (140 mph) (without reflector pod)
Temperature -40ºC to 65ºC (-40°F to 150°F) Total Platform Weight 63 kg (139 lbs)
Operational (with reflector pod)
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Motors
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked Electrical Interface 24VDC 8 Amp (Max.)
Shock Test per IEC 60068-2-27, Water Ingress per IP-66
Note:
(1) LNB PLL Type required with stability better than ± 25 KHz
Ka-98G
Technical specifications
The iNetVu® Ka-98G Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for Broadband
Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite acquisition within
minutes, anytime anywhere.
Features
• One-Piece high surface accuracy, offset feed, steel reflector
• Heavy duty feed arm capable of supporting up to 5kg
(10 lbs) RF transceiver
• Designed to work with the iNetVu® 7024C Controller
• Works seamlessly with the world’s most popular
commercially available Ka modems and services
• 2 Axis motorization (3 Axis Optional)
• Supports manual control when required
• One button, auto-pointing controller acquires any Ka-band
satellite within 2 minutes
• Field upgradable to Ku-band
• Locates satellites using the most advanced satellite
acquisition methods
• Supports Skyware Global 98 cm Ka antenna and 3W
transceiver
• Avanti approved; also compliant with Gilat (SkyEdge) Ka
services
• Available with pod option
• Standard 2 year warranty
Application Versatility
If you operate in Ka-band, the Ka-98G system is easily configured to provide instant access to satellite communications for any application
that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
http://www.avantiplc.com/avanti-approved-compatibility
Ka-98G
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base
Deployment Sensors GPS antenna Connector
Compass ± 2º
Tilt sensor ± 0.1º
Azimuth Full 360º in overlapping 200º sectors Physical
Elevation 0 - 90º
Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Polarization LHCP/RHCP (Motorized Option Available)
Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Elevation Deploy Speed Variable 2º/sec typ.
(without reflector pod) H: 30 cm (11.8”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ.
Stowed Reflector Ext. Dims L: 178.8 cm (70.4”) W: 113 cm (44.5”)
Peaking Speed 0.1º/sec
(with reflector pod) H: 30 cm (11.8”)
Deployed Height 151 cm (59.5”)
Platform Weight 54 kg (119 lbs)
Environmental Reflector back cover 2.27 kg (5 lbs)
Survival Pod alone 6.8 kg (15 lbs)
Wind Deployed 160 km/h (100 mph) Total Platform Weight 56.3 kg (124 lbs)
Wind Stowed 225 km/h (140 mph) (without reflector pod)
Temperature -40ºC to 65ºC (-40°F to 150°F) Total Platform Weight 63 kg (139 lbs)
Operational (with reflector pod)
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Motors
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures Electrical Interface 24VDC 8 Amp (Max.)
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27, Water Ingress per IP-66
Shipping Weights & Dimensions*
Ka-98V
Technical specifications
The iNetVu® Ka-98V Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for Broadband
Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite acquisition within
minutes, anytime anywhere.
Features
Eutelsat type approved for Broadband Services
• One-Piece high surface accuracy, offset feed, steel reflector
• Heavy duty feed arm now supports both type of
Transceivers: Standard Tria and new eTRIA
• Designed to work with the iNetVu® 7024C Controller
• Works seamlessly with the world’s emerging commercial
ViaSat / KA-SAT satellite Surfbeam II modems
• Eutelsat type approved for Broadband Services*
• Auto beam select on KA-SAT Tooway services
• 2 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires any Ka-band
satellite within 2 minutes
• Field upgradable to Ku-band
• Locates satellites using the most advanced satellite
acquisition methods
• Supports Skyware Global 98 cm Ka antenna and 4W
transceiver
• Available with pod option
• Standard 2 year warranty
Application Versatility
If you operate in Ka-band, the Ka-98V system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation mobile Ka terminal delivers affordable broadband
Internet services (High-speed access, Video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
* http://www.eutelsat.com/files/contributed/support/pdf/Eutelsat_Broadband_Services.pdf (p.15)
Ka-98V
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base
Deployment Sensors GPS antenna Connector
Compass ± 2º
Tilt sensor ± 0.1º
Azimuth Full 360º in overlapping 200º sectors Physical
Elevation 0 - 90º
Elevation Deploy Speed Variable 2º/sec typ. Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ. Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Peaking Speed 0.1º/sec (without reflector pod) H: 30 cm (11.8”)
Stowed Reflector Ext. Dims L: 178.8 cm (70.4”) W: 113 cm (44.5”)
(with reflector pod) H: 30 cm (11.8”)
Deployed Height 151 cm (59.5”)
Environmental Platform Weight 54 kg (119 lbs)
Survival Reflector back cover 2.27 kg (5 lbs)
Wind Deployed 160 km/h (100 mph) Pod alone 6.8 kg (15 lbs)
Wind Stowed 225 km/h (140 mph) Total Platform Weight 56.3 kg (124 lbs)
Temperature -40ºC to 65ºC (-40°F to 150°F) (without reflector pod)
Operational Total Platform Weight 63 kg (139 lbs)
Wind 72 km/h (45 mph) (with reflector pod)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Ka-98H
Technical specifications
The iNetVu® Ka-98H Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for
Broadband Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite
acquisition within minutes, anytime anywhere.
Features
• One-Piece high surface accuracy, offset feed, steel reflector
• Heavy duty feed arm capable of supporting up to 5kg
(10 lbs) RF Electronics (LNB & BUC) or transceiver
Jupiter Radio
• Designed to work with the iNetVu® 7024C Controller
• Works seamlessly with the world’s most popular
commercially available Ka modems and services
• 2 Axis motorization/ 3 Axis optional (Jupiter only)
• Supports manual control when required
• One button, auto-pointing controller acquires any Ka-band
satellite within 2 minutes
• Field upgradable to Ku-band
• Locates satellites using the most advanced satellite
acquisition methods
• Supports Skyware Global 98 cm Ka antenna
• Works with HNS Spaceway (NA)(1), YAHSAT (MENA)(1) and
Avanti approved(1)
• Available with pod option
• Standard 2 year warranty
Application Versatility
If you operate in Ka-band, the Ka-98H system is easily configured to provide instant access to satellite communications for any application
that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
Ka-98H
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, Offset feed Radio Mounting Feed Arm (1)
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base
Deployment Sensors GPS antenna Connector
Compass ± 2º
Tilt sensor ± 0.1 Physical
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 90º Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Elevation Deploy Speed Variable 2º/sec typ. Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ. (without reflector pod) H: 30 cm (11.8”)
Peaking Speed 0.1º/sec Stowed Reflector Ext. Dims L: 178.8 cm (70.4”) W: 113 cm (44.5”)
(with reflector pod) H: 30 cm (11.8”)
Deployed Height 151 cm (59.5”)
Platform Weight 54 kg (119 lbs)
Environmental Reflector back cover 2.27 kg (5 lbs)
Survival Pod alone 6.8 kg (15 lbs)
Wind Deployed 160 km/h (100 mph) Total Platform Weight 56.3 kg (124 lbs)
Wind Stowed 225 km/h (140 mph) (without reflector pod)
Temperature -40ºC to 65ºC (-40°F to 150°F) Total Platform Weight 63 kg (139 lbs)
Operational (with reflector pod)
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Motors
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures
Electrical Interface 24VDC 8 Amp (Max.)
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27, Water Ingress per IP-66
Shipping Weights & Dimensions*
Electrical Crate: 183 cm x 109 cm x 66 cm (72” x 43” x 26”), 52 kg (115 lbs)
Rx & Tx Cables 2 RG6 cables - 10 m (33 ft) each Platform: 54 kg (119 lbs)
Control Cables 7024C Controller: 6 kg (13 lbs)
Cables: 5 kg (11 lbs)
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Total weight: 117 kg (258 lbs)
Receive Transmit Transportable Case Option:
Frequency (GHz) 19.20 - 20.20 29.50 - 30.00 Base Case: 183 cm x 109 cm x 47 cm (72” x 43” x 18.5”), 133.5 kg (294 lbs)
Feed Interface (Circular) RG6 RG6
* The shipping weights/dims can vary for particular shipments depending on actual
Midband Gain (± 0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75GHz system configuration, quantity, packaging materials and special requirements
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope, Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -24 dB > -22 dB
VSWR 1.3:1
Notes:
(1) Supported Radios: Spaceway or Jupiter. Please specify which radio being used when ordering.
http://www.avantiplc.com/avanti-approved-compatibility
Ka-98H/Jup
Technical specifications
The iNetVu® Ka-98H/Jup Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for
Broadband Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7710 Controller providing fast satellite
acquisition within minutes, anytime anywhere.
Features
• One-Piece high surface accuracy, offset feed, SMC reflector
• Heavy duty feed arm capable of supporting up to 5kg
(10 lbs) RF Electronics (LNB & BUC) or transceiver
• Designed to work with the iNetVu® 7710 Controller
• Adapted to operate on HNS Jupiter based Network
Technology
• 2 or 3 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires any Ka-band
satellite within 2 minutes
• Field upgradable to Ku-band
• Locates satellites using the most advanced satellite
acquisition methods
• Supports GD/HNS 98cm Ka antenna
• Works with HNS Jupiter (NA)(1), YAHSAT (MENA)(1) and
Avanti(1)
• Standard 2 year warranty
Application Versatility
If you operate in Ka-band, the Ka-98H/Jup system is easily configured to provide instant access to satellite communications for any application
that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
Ka-98H/Jup
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, Offset feed Radio Mounting Feed Arm (1)
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base
Deployment Sensors GPS antenna Connector
Compass ± 2º
Tilt sensor ± 0.1 Physical
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 90º Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Elevation Deploy Speed Variable 2º/sec typ. Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ. H: 30 cm (11.8”)
Peaking Speed 0.1º/sec Deployed Height 151 cm (59.5”)
Platform Weight 54 kg (119 lbs)
Environmental
Motors
Survival
Electrical Interface 24VDC 8 Amp (Max.)
Wind Deployed 160 km/h (100 mph)
Wind Stowed 225 km/h (140 mph)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational Shipping Weights & Dimensions*
Wind 72 km/h (45 mph) Crate: 183 cm x 109 cm x 66 cm (72” x 43” x 26”), 52 kg (115 lbs)
Temperature -30ºC to 55ºC (-22°F to 130°F) Platform: 54 kg (119 lbs)
7710 Controller: 6 kg (13 lbs)
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures Cables: 5 kg (11 lbs)
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27, Water Ingress per IP-66 Total weight: 117 kg (258 lbs)
Receive Transmit
Frequency (GHz) 19.20 - 20.20 29.50 - 30.00
Feed Interface (Circular) RG6 RG6
Midband Gain (± 0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75GHz
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope, Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -24 dB > -22 dB
VSWR 1.3:1
Notes:
(1) Supported Radios: Jupiter Radios motorized with Rotary Joint
1201
Technical specifications
The iNetVu® 1201 Drive-Away antenna system is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of a
vehicle. It is suitable for the most demanding applications. Its reflector optics feature a long focal length for excellent cross-pol performance. All
three motorized axes have very low backlash and work together seamlessly with sophisticated integral sensors and the iNetVu® 7024C Controller
to ensure excellent pointing accuracy.
Features
• 1.2m Offset, prime focus, thermoset-molded reflector with
back cover
• Low stow height
• Patented sleek aerodynamic form (Patent # D696649 &
D696650)
• Designed to work with the iNetVu® 7024C Controller
• Supports hand cranks
• One button, auto-pointing controller acquires any Ku-band
satellite within 2 minutes
• Optimal high-precision antenna pointing
• Includes jog controller functions
• Remote access and operation via network, web and other
interfaces
• Modular design makes all major aspects of the antenna field
serviceable
• Supports Skyware 1.2m antenna, Type 125
• Wind deflector pod (optional)
• 2-piece thermoset-molded reflector (optional)
• Characterized with Eutelsat* and Intelsat Compliant
• Standard 2 year warranty
Application Versatility
The 1201 drive-away system is easily configured to provide instant access to satellite communications for any application that requires reliable
and/or remote connectivity in a rugged environment. Ideally suited for applications that require a quick, simple set-up typically for industries such
as SNG, Disaster Management, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
1201
Technical specifications
Mechanical Physical
Reflector Size & Material 1.2m Glass fibre reinforced polyester (1) Stowed dimensions L: 203 cm (79.9”) W: 124 cm (48.8”)
Platform Geometry Elevation over Azimuth (without pod) H: 35 cm (13.8”)
Offset Angle 16.97º Stowed Dimensions L: 225 cm (88.5”) W: 135 cm (53.2”)
Antenna Optics One-piece offset feed, prime focus (with pod) H: 35 cm (13.8”)
Azimuth Travel ± 200º Reflector Weight 16 kg (35.2 lbs)
Elevation Look Angle 0º to 90º (including back cover)
Polarization Travel ± 95º Total Platform Weight 82 kg (180 lbs)
Elevation Deploy Speed 2º/sec (without pod)
Azimuth Deploy Speed 6º/sec Total Platform Weight 88 kg (193 lbs)
Peaking Speed 0.2º/sec (with pod)
Motor Voltage 24 VDC 10 Amp (Max.)
Ku (Linear)
Environmental
Transmit Power 1 to 200 watt (2)
Feed 2 Port XPol
Wind loading Receive Transmit
Operational 75 km/h (46.5 mph) Frequency (GHz) 10.70 - 12.75 (3) 13.75 - 14.50
Survival Feed Interface WR75 WR75
Deployed 112 km/h (70 mph) Midband Gain Co-Pol (± 0.2dBi) 41.80 43.30
Stowed 225 km/h (140 mph) Antenna Noise Temp. (K ) 10º EL = 45 / 30º EL = 24
Temperature Sidelobe Envelope, Co-Pol (dBi)
Operational -30º to 55º C (-22º to 131º F) 1.5º<Θ<20º 29-25 Log Θ
Survival -40º to 65º C (-40º to 149º F) 20º<Θ<26.3º -3.5
Solar Radiation 360 BTU/h/sq. ft. 26.3º<Θ<48º 32-25 Log Θ
Rain 1.3 cm/h (0.51 in/h) 48º<Θ<180º -10 (Typical)
Humidity 0-100% (condensing) Cross-Polarization on Axis > 35 dB
Within 1dB Beamwidth > 30 dB
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures Tx/Rx Isolation > 40 dB 90 dB
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked VSWR 1.3:1 1.3:1
Shock Test per IEC 60068-2-27, Water Ingress per IP-66
Shipping Weights & Dimensions*
Electrical Platform Crated: 211 cm x 41 cm x 61 cm (83” x 16” x 24”), 121 kg (267 lbs)
Reflector Crate: 142 cm x 15 cm x 130 cm (56” x 6” x 51”), 22 kg (48 lbs)
Rx & Tx Cables 2 RG6 Cables - 10 m (33 ft) each Pod: 160 cm x 15 cm x 140 cm (63” x 6” x 55”,) 12kg (27 lbs)
Control Cables
Total Weight without pod: 143 kg (315 lbs )
Standard 10 m (33 ft) Extension Cable Total Weight with pod: 155 kg (342 lbs)
Optional Up to 30 m (100 ft) available
Transportable Case Options:
RF Interface Platform: 211 cm x 65 cm x 45 cm (83” x 25.75” x 17.75”)132 kg (290 lbs)
Radio Mounting Feed arm/Inside vehicle Reflector: 1- piece:
127 cm x 122 cm x 20 cm (50” x 48’’ x 8”), 45.5 kg (100 lbs)
Coaxial RG6U F Type
Reflector: 2- piece: (Optional)
N Type (optional)
132 cm x 31 cm x 76 cm (52” x 12’’ x 30’’), 34 kg (74 lbs)
Axis transition Twist-Flex Waveguide
* The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Notes:
(1) Antenna based on Skyware, Model 125
(2) Depending on size and weight for feed arm mounting limitation,
Eutelsat Characterized up to 40 watt BUC with Tx XPD >25 dB within 1 dB Contour
(3) LNB PLL Type required with stability better than ± 25 KHz
1202
Technical specifications
The iNetVu® 1202 Drive-Away antenna system is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of a
vehicle. It is suitable for the most demanding applications. Its reflector optics feature a long focal length for excellent cross-pol performance. All
three motorized axes have very low backlash and work together seamlessly with sophisticated integral sensors and the iNetVu® 7710 Controller to
ensure excellent pointing accuracy.
Features
• 1.2m Offset, prime focus, thermoset-molded reflector with
back cover
• Low stow height
• Patented sleek aerodynamic form (Patent # D696649 &
D696650)
• Designed to work with the iNetVu® 7710 Controller
• Supports hand cranks
• One button, auto-pointing controller acquires any Ku-band
satellite within 2 minutes (<3 minutes with Beacon Receiver)
• Optimal high-precision antenna pointing
• Includes jog controller functions
• Remote access and operation via network, web and other
interfaces
• Modular design makes all major aspects of the antenna field
serviceable
• Supports Skyware 1.2m antenna, Type 125
• Wind deflector pod (optional)
• 2-piece thermoset-molded reflector (optional)
• Compliant with Eutelsat* and Intelsat
• Standard 2 year warranty
Application Versatility
The 1202 drive-away system is easily configured to provide instant access to satellite communications for any application that requires reliable
and/or remote connectivity in a rugged environment. Ideally suited for applications that require a quick, simple set-up typically for industries such
as SNG, Disaster Management, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
1202
Technical specifications
Mechanical Physical
Reflector Size & Material 1.2m Glass fibre reinforced polyester (1) Stowed dimensions L: 203 cm (79.9”) W: 124 cm (48.8”)
Platform Geometry Elevation over Azimuth (without pod) H: 35 cm (13.8”)
Offset Angle 16.97º Stowed Dimensions L: 225 cm (88.5”) W: 135 cm (53.2”)
Antenna Optics One-piece offset feed, prime focus (with pod) H: 35 cm (13.8”)
Azimuth Travel ± 200º Reflector Weight 16 kg (35.2 lbs)
Elevation Look Angle 0º to 90º (including back cover)
Polarization Travel ± 95º Total Platform Weight 82 kg (180 lbs)
Elevation Deploy Speed 2º/sec (without pod)
Azimuth Deploy Speed 6º/sec Total Platform Weight 88 kg (193 lbs)
Peaking Speed 0.2º/sec (with pod)
Motor Voltage 24 VDC 10 Amp (Max.)
Ku (Linear)
Environmental
Transmit Power 1 to 200 watt (2)
Feed 2 Port XPol
Wind loading Receive Transmit
Operational 75 km/h (46.5 mph) Frequency (GHz) 10.70 - 12.75 (3) 13.75 - 14.50
Survival Feed Interface WR75 WR75
Deployed 112 km/h (70 mph) Midband Gain Co-Pol (± 0.2dBi) 41.80 43.30
Stowed 160 km/h (100 mph) Antenna Noise Temp. (K ) 10º EL = 45 / 30º EL = 24
Temperature Sidelobe Envelope, Co-Pol (dBi)
Operational -30º to 55º C (-22º to 131º F) 1.5º<Θ<20º 29-25 Log Θ
Survival -40º to 65º C (-40º to 149º F) 20º<Θ<26.3º -3.5
Solar Radiation 360 BTU/h/sq. ft. 26.3º<Θ<48º 32-25 Log Θ
Rain 1.3 cm/h (0.51 in/h) 48º<Θ<180º -10 (Typical)
Humidity 0-100% (condensing) Cross-Polarization on Axis > 35 dB
Within 1dB Beamwidth > 30 dB
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures Tx/Rx Isolation > 40 dB 90 dB
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked VSWR 1.3:1 1.3:1
Shock Test per IEC 60068-2-27
Shipping Weights & Dimensions*
Electrical Platform Crated: 211 cm x 41 cm x 61 cm (83” x 16” x 24”), 121 kg (267 lbs)
Reflector Crate: 142 cm x 15 cm x 130 cm (56” x 6” x 51”), 22 kg (48 lbs)
Rx & Tx Cables 2 RG6 Cables - 10 m (33 ft) each Pod: 160 cm x 15 cm x 140 cm (63” x 6” x 55”,) 12kg (27 lbs)
Control Cables
Total Weight without pod: 143 kg (315 lbs )
Standard 10 m (33 ft) Extension Cable Total Weight with pod: 155 kg (342 lbs)
Optional Up to 30 m (100 ft) available
Transportable Case Options:
RF Interface Platform: 211 cm x 65 cm x 45 cm (83” x 25.75” x 17.75”)132 kg (290 lbs)
Radio Mounting Feed arm/Inside vehicle Reflector: 1- piece:
127 cm x 122 cm x 20 cm (50” x 48’’ x 8”), 45.5 kg (100 lbs)
Coaxial RG6U F Type
Reflector: 2- piece: (Optional)
N Type (optional)
132 cm x 31 cm x 76 cm (52” x 12’’ x 30’’), 34 kg (74 lbs)
Axis transition Twist-Flex Waveguide
* The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Notes:
(1) Antenna based on Skyware, Model 125
(2) Depending on size and weight for feed arm mounting limitation,
Eutelsat Characterized up to 40 watt BUC with Tx XPD >25 dB within 1 dB Contour
(3) LNB PLL Type required with stability better than ± 25 KHz
Ka-1202V
Technical specifications
The iNetVu® Ka-1202V Drive-Away antenna system is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of
a vehicle. It is suitable for the most demanding applications. All axes have very low backlash and work together seamlessly with sophisticated
integral sensors and the iNetVu® 7710 Controller to ensure excellent pointing accuracy.
Features
• 1.2m Offset, prime focus, thermoset-molded reflector with
back cover
• Low stow height
• Designed to work with the iNetVu® 7710 Controller
• Supports hand cranks
• One button, auto-pointing controller acquires ViaSat or KA-
SAT Ka-band satellite within 2 minutes
• Optimal high-precision antenna pointing
• Includes jog controller functions
• Remote access and operation via network, web and other
interfaces
• Modular design makes all major aspects of the antenna field
serviceable
• Supports ViaSat/General Dynamics 1.2m Ka antenna
• 2-piece thermoset-molded reflector (optional)
• Compliant with commercial Ka Services (Exede & toowayTM)
• Standard 2 year warranty
EXEDE® ENTERPRISE
AU T H O R I Z E D E Q U I P M E N T
Application Versatility
The Ka-1202V drive-away system is easily configured to provide instant access to satellite communications for any application that requires
reliable and/or remote connectivity in a rugged environment. Ideally suited for applications that require a quick, simple set-up typically for
industries such as SNG, Disaster Management, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
Ka-1202V
Technical specifications
Mechanical Physical
Reflector Size & Material 1.2m Glass Fibre Reinforced Polyester SMC (1) Stowed dimensions L: 203 cm (79.9”) W: 124 cm (48.8”)
Platform Geometry Elevation over Azimuth H: 35 cm (13.8”)
Offset Angle N/A Reflector Weight 16 kg (35.2 lbs)
Antenna Optics One-piece offset feed, prime focus (including back cover)
Azimuth Travel ± 200º Total Platform Weight 82 kg (180 lbs)
Elevation Look Angle 0º to 90º
Elevation Deploy Speed 2º/sec Ka (Circular)
Azimuth Deploy Speed 6º/sec
Feed Interface RG6 F Type
Peaking Speed 0.2º/sec
Receive Transmit
Motor Voltage 24 VDC 10 Amp (Max.)
Frequency (GHz) 19.70 - 20.20 29.50 - 30.00
Midband Gain Co-Pol (± 0.2dBi) 46.50 49.60
Environmental G/T 23.6 dB/K
Wind loading Antenna Noise Temp. (K ) 20º EL = 107 / 40º EL = 89
Operational 72 km/h (45 mph) Sidelobe Envelope, Co-Pol (dBi)
Survival 1.5º<Θ<20º 29-25 Log Θ
Deployed 112 km/h (70 mph) 20º<Θ<26.3º -3.5
Stowed 160 km/h (100 mph) 26.3º<Θ<48º 32-25 Log Θ
Temperature 48º<Θ<180º -10 (Typical)
Operational -30º to 55º C (-22º to 131º F) Cross-Pol Within 1dB BW >22.0 dB >22.0 dB
Survival -40º to 65º C (-40º to 149º F) VSWR 1.3:1 1.3:1
Solar Radiation 360 BTU/h/sq. ft.
Rain 1.3 cm/h (0.51 in/h) Shipping Weights & Dimensions*
Humidity 0-100% (condensing) Platform Crated: 211 cm x 41 cm x 61 cm (83” x 16” x 24”), 121 kg (267 lbs)
Reflector Crate: 142 cm x 15 cm x 130 cm (56” x 6” x 51”), 22 kg (48 lbs)
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures
Total Weight: 143 kg (315 lbs)
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27
Transportable Case Options:
Platform: 211 cm x 65 cm x 45 cm (83” x 25.75” x 17.75”)132 kg (290 lbs)
Reflector: 1- piece:
Electrical 127 cm x 122 cm x 20 cm (50” x 48’’ x 8”), 45.5 kg (100 lbs)
Rx & Tx Cables Single IFL, RG6 cable - 10 m (33 ft) Reflector: 2- piece: (Optional)
Control Cables 132 cm x 31 cm x 76 cm (52” x 12’’ x 30’’), 34 kg (74 lbs)
Standard 10 m (33 ft) Extension Cable
* The shipping weights/dims can vary for particular shipments depending on actual
Optional Up to 30 m (100 ft) available system configuration, quantity, packaging materials and special requirements
RF Interface
Radio Mounting Feed arm/Inside vehicle
Notes:
(1) Antenna based on General Dynamics
Ka-1202G
Technical specifications
The iNetVu® Ka-1202G Drive-Away antenna system is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof
of a vehicle. It is suitable for the most demanding applications. All axes have very low backlash and work together seamlessly with sophisticated
integral sensors and the iNetVu® 7710 Controller to ensure excellent pointing accuracy.
Features
• 1.2m Offset, prime focus, thermoset-molded reflector with
back cover
• Low stow height
• Designed to work with the iNetVu® 7710 Controller
• Supports hand cranks
• One button, auto-pointing controller acquires Ka-band
satellite within 2 minutes
• Optimal high-precision antenna pointing
• Includes jog controller functions
• Remote access and operation via network, web and other
interfaces
• Modular design makes all major aspects of the antenna field
serviceable
• Supports General Dynamics 1.2m Ka antenna
• 2-piece thermoset-molded reflector (optional)
• Compliant with commercial Ka Services (Avanti/Gilat)
• Optional 3W & 5W transceivers; higher BUCs also supported
• Standard 2 year warranty
Application Versatility
The Ka-1202G drive-away system is easily configured to provide instant access to satellite communications for any application that requires
reliable and/or remote connectivity in a rugged environment. Ideally suited for applications that require a quick, simple set-up typically for
industries such as SNG, Disaster Management, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
Ka-1202G
Technical specifications
Mechanical Physical
Reflector Size & Material 1.2m Glass Fibre Reinforced Polyester SMC (1) Stowed dimensions L: 203 cm (79.9”) W: 124 cm (48.8”)
Platform Geometry Elevation over Azimuth H: 35 cm (13.8”)
Offset Angle N/A Reflector Weight 16 kg (35.2 lbs)
Antenna Optics One-piece offset feed, prime focus (including back cover)
Azimuth Travel ± 200º Total Platform Weight 82 kg (180 lbs)
Elevation Look Angle 0º to 90º
Elevation Deploy Speed 2º/sec Ka (Circular)
Azimuth Deploy Speed 6º/sec
Feed Interface RG6 F Type
Peaking Speed 0.2º/sec
Receive Transmit
Motor Voltage 24 VDC 10 Amp (Max.)
Frequency (GHz) 19.20 - 20.20 29.50 - 30.00
Midband Gain Co-Pol (± 0.2dBi) 46.50 49.60
Environmental G/T 23.6 dB/K @ 19.95 GHz
Wind loading Antenna Noise Temp. (K ) 20º EL = 107 / 40º EL = 89
Operational 72 km/h (45 mph) Sidelobe Envelope, Co-Pol (dBi)
Survival 1.5º<Θ<20º 29-25 Log Θ
Deployed 112 km/h (70 mph) 20º<Θ<26.3º -3.5
Stowed 160 km/h (100 mph) 26.3º<Θ<48º 32-25 Log Θ
Temperature 48º<Θ<180º -10 (Typical)
Operational -30º to 55º C (-22º to 131º F) Cross-Pol Within 1dB BW >22.0 dB >22.0 dB
Survival -40º to 65º C (-40º to 149º F) VSWR 1.3:1 1.3:1
Solar Radiation 360 BTU/h/sq. ft.
Rain 1.3 cm/h (0.51 in/h) Shipping Weights & Dimensions*
Humidity 0-100% (condensing) Platform Crated: 211 cm x 41 cm x 61 cm (83” x 16” x 24”), 121 kg (267 lbs)
Reflector Crate: 142 cm x 15 cm x 130 cm (56” x 6” x 51”), 22 kg (48 lbs)
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures
Total Weight: 143 kg (315 lbs)
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27
Transportable Case Options:
Platform: 211 cm x 65 cm x 45 cm (83” x 25.75” x 17.75”)132 kg (290 lbs)
Reflector: 1- piece:
Electrical 127 cm x 122 cm x 20 cm (50” x 48’’ x 8”), 45.5 kg (100 lbs)
Rx & Tx Cables 2 RG6 cables Reflector: 2- piece: (Optional)
Control Cables 132 cm x 31 cm x 76 cm (52” x 12’’ x 30’’), 34 kg (74 lbs)
Standard 10 m (33 ft) Extension Cable
Optional Up to 30 m (100 ft) available
RF Interface
Radio Mounting Feed arm/Inside vehicle
* The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Notes:
(1) Antenna based on General Dynamics/Skyware Global
1501
Technical specifications
The iNetVu® 1501 Drive-Away antenna system is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of a
vehicle. It is suitable for the most demanding applications. Its reflector optics feature a long focal length for excellent cross-pol performance. All
three motorized axes have very low backlash and work together seamlessly with sophisticated integral sensors and the iNetVu® 7710 Controller to
ensure excellent pointing accuracy.
Features
• 1.5m Offset, prime focus, carbon fibre reflector
• Low stow height
• Designed to work with the iNetVu® 7710 Controller
• Supports hand cranks
• Supports up to 100W Redundant BUC directly on feed arm
• One button, auto-pointing controller acquires any satellite
within 2 minutes
• Optimal high-precision antenna pointing
• Includes jog controller functions
• Remote access and operation via network, web and other
interfaces
• Modular design makes all major aspects of the antenna field
serviceable
• Standard 2 year warranty
Application Versatility
The 1501 drive-away system is easily configured to provide instant access to satellite communications for any application that requires reliable
and/or remote connectivity in a rugged environment. Ideally suited for applications that require a quick, simple set-up typically for industries such
as SNG, Disaster Management, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
1501
Technical specifications
Mechanical Electrical
Reflector Size & Material 1.5m Carbon Fibre Rx & Tx Cables 2 RG6 Cables - 10 m (33 ft) each
Platform Geometry Elevation over Azimuth Control Cables
Offset Angle 16.97º Standard 10 m (33 ft) Extension Cable
Antenna Optics One-piece offset feed, prime focus Optional Up to 30 m (100 ft) available
Azimuth Travel ± 180º
Elevation Look Angle 0º to 90º RF Interface
Polarization Travel ± 95º
Radio Mounting Feed arm/Inside vehicle
Elevation Deploy Speed 2º/sec
Coaxial RG6U F Type
Azimuth Deploy Speed 6º/sec
N Type (optional)
Peaking Speed 0.2º/sec
Axis transition Rotary Joint +Twist-Flex Waveguide
Motor Voltage 24 VDC 10 Amp (Max.)
Environmental
Physical
Wind loading
Stowed dimensions L: 203 cm (79.9”) W: 154 cm (60.5”)
Operational 72 km/h (45 mph)
H: 49 cm (19.25”)
Survival
Reflector Weight 11.3 kg (25 lbs)
Deployed 112 km/h (70 mph)
Platform Weight 72.7 kg (160 lbs)
Stowed 160 km/h (100 mph)
Total Platform Weight 84 kg (185 lbs)
Temperature
Operational -30º to 55º C (-22º to 131º F)
Survival -40º to 65º C (-40º to 149º F) Shipping Weights & Dimensions*
Solar Radiation 1000Kcal/h/m (360 BTU/h/sq. ft.)
Platform Crated: 211 cm x 41 cm x 61 cm (83” x 16” x 24”), 118 kg (260 lbs)
Rain 10 cm/h (4 in/h) Reflector Crate: 168cm x 168cm x 48cm (66” x 66” x 19”), 116.3 kg (256 lbs)
Humidity 0-100% (condensing) Total Weight: 234.3 kg (516 lbs)
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Shock Test per IEC 60068-2-27
Antenna Bands
Transmit Power (1) 1 to 200 watt
Feed 2 Port XPol
Ku-Linear C-Linear (3) C-Circular (3) Ka - Linear R/O (3)
Receive Transmit Receive Transmit Receive Transmit Receive
Frequency (GHz) 10.70 - 12.75(2) 13.75 - 14.50 3.40 - 4.20(2) 5.850 - 6.725 3.625 - 4.20(2) 5.850 - 6.425 17.70 – 21.2(2)
Feed Interface WR75 WR75 CPR-229 N or CPR-137 CPR-229 N or CPR-137 WR42
Midband Gain Co-Pol (± 0.2dBi) 43.70 45.00 33.40 37.20 33.30 37.10
Antenna Noise Temp. (K ) 10º EL = 65 / 20º EL = 58 10º EL = 45 / 20º EL = 40 10º EL = 41 / 20º EL = 36
Sidelobe Envelope, Co-Pol (dBi)
1.5º<Θ<20º Meets ITU 580, Intelsat IESS 601 STD G 29-25 Log Θ
20º<Θ<26.3º -3.5 -3.5 -3.5
26.3º<Θ<48º 32-25 Log Θ 32-25 Log Θ 32-25 Log Θ
48º<Θ<180º -10 (Typical) -10 (Typical) -10 (Typical)
Cross-Polarization on Axis > 35 dB > 30 dB N/A
Within 1dB Beamwidth > 30 dB > 26 dB N/A
Tx/Rx Isolation > 40 dB 90 dB > 60 dB 35 dB > 60 dB 60 dB
VSWR 1.3:1 1.3:1 1.5:1 1.3:1 1.5:1 1.3:1
Notes:
(1) Depending on size and weight for feed arm mounting limitation
(2) LNB PLL Type required with stability better than ± 25 KHz
(3) Call your C-COM sales representative for availability
Technical specifications
Classic
Driveaways
Classic Drive-Aways
Technical specifications
1500 1800+
980
Technical specifications
The iNetVu® 980 Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for Broadband
Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite acquisition within
minutes, anytime anywhere.
Features
Application Versatility
If you operate in Ku-band, the 980 system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
980
Technical specifications
Mechanical RF Interface
Reflector 98 cm Prime focus, offset feed (1) Radio Mounting Feed Arm / Rear of Base /Inside Vehicle
Platform Geometry Elevation over Azimuth Axis Transition Twist-Flex Waveguide
Polarization Reflector rotation cross-pol isolation Waveguide WR75 Cover Flange Interface
GPS antenna Coaxial RG6U from Feedhorn to Base Connector
Deployment Sensors Compass ± 2º European/Eutelsat Feed Prodelin Model 1985 Based (2 Port - X Pol)
Tilt sensor ± 0.2º Standard Feed Prodelin Model 1984 Based (2 Port - X Pol)
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 65º
Polarization ±70º Physical
Elevation Deploy Speed Variable 5º/sec typ.
Azimuth Deploy Speed Variable 15º/sec Max., 10º/ sec typ. Mounting Plate L: 127 cm (50”)
Peaking Speed 0.2º/sec W: 46 cm (18”)
Stowed Reflector Ext. Dims L: 155 cm (61”)
W: 100 cm (39.5”)
Environmental H: 46 cm (18.3”)
Survival Deployed Height 132 cm (52”)
Wind Deployed 160 km/h (100 mph) Reflector Assembly Weight 13.7 kg (30 lbs)
Wind Stowed 225 km/h (140 mph) Platform Weight 51.3 kg (113 lbs)
Temperature -40ºC to 65ºC (-40°F to 150°F) Total Weight 65 kg (143 lbs)
Operational
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Motors
Thermal Test per MIL-STD-810F, Method 501.4, Low Temperatures
Electrical Interface 12VDC 15 Amp (Max.)
Electrical
Shipping Weights & Dimensions*
Rx & Tx cable 2 RG6 cables - 9.1m (30 ft) each
Control cables: Empty Crate: 163 cm x 107 cm x 72 cm (64” x 42” x 28”), 54 kg (119 lbs)
Standard 9.1m (30 ft) Ext. Cable Platform: 65 kg (143 lbs)
Optional up to 60 m (200 ft) available 7024C Controller: 6 kg (13 lbs)
Transmit Power (2) 1 to 200 Watt (Ku-band) Cables: 5 kg (11lbs)
980-REM
Technical specifications
The iNetVu® 980-REM Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle or in a
transportable case for Broadband Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller &
Hughes Rembrandt 2Watt Transceiver providing fast satellite acquisition within minutes, anytime anywhere.
Features
Application Versatility
If you operate in Ku-band, the 980 Hughes Rembrandt system is easily configured to provide instant access to satellite communications for
any application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
980-REM
Technical specifications
Mechanical RF Interface
Reflector 98 cm Prime focus, offset feed (1) Radio Mounting Feed Arm / Rear of Base /Inside Vehicle
Platform Geometry Elevation over Azimuth Axis Transition Twist-Flex Waveguide
Polarization Reflector rotation cross-pol isolation Waveguide WR75 Cover Flange Interface
GPS antenna Coaxial RG6U from Feedhorn to Base Connector
Deployment Sensors Compass ± 2º European/Eutelsat Feed Prodelin Model 1985 Based (2 Port - X Pol)
Tilt sensor ± 0.2º Standard Feed Prodelin Model 1984 Based (2 Port - X Pol)
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 65º
Polarization ±70º Physical
Elevation Deploy Speed Variable 5º/sec typ.
Azimuth Deploy Speed Variable 15º/sec Max., 10º/ sec typ. Mounting Plate L: 127 cm (50”)
Peaking Speed 0.2º/sec W: 46 cm (18”)
Stowed Reflector Ext. Dims L: 155 cm (64”)
W: 100 cm (39.5”)
Environmental H: 46 cm (20.5”)
Survival Deployed Height 132 cm (52”)
Wind Deployed 160 km/h (100 mph) Reflector Assembly Weight 13.7 kg (30 lbs)
Wind Stowed 225 km/h (140 mph) Platform Weight 52.2 kg (115 lbs)
Temperature -40ºC to 65ºC (-40°F to 150°F) Total Weight 65.8 kg (145 lbs)
Operational
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Motors
Thermal Test per MIL-STD-810F, Method 501.4, Low Temperatures
Electrical Interface 12VDC 15 Amp (Max.)
Electrical
Shipping Weights & Dimensions*
Rx & Tx cable 2 RG6 cables - 9.1m (30 ft) each
Control cables: Empty Crate: 163 cm x 107 cm x 72 cm (64” x 42” x 28”), 54 kg (119 lbs)
Standard 9.1m (30 ft) Ext. Cable Platform: 65 kg (143 lbs)
Optional up to 60 m (200 ft) available 7024C Controller: 6 kg (13 lbs)
Transmit Power (2) 1 to 200 Watt (Ku-band) Cables: 5 kg (11lbs)
1200
Technical specifications
The iNetVu® 1200 Drive-Away Antenna is a 1.2m auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for
Broadband Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite
acquisition within minutes, anytime anywhere.
Features
• One-Piece offset feed, prime focus, SMC reflector with a back
cover
• Heavy duty platform for up to 11kg (25 lbs) RF Electronics
(LNB & BUC)
• Designed to work with the iNetVu® 7000C controller
• Works seamlessly with the world’s most popular commercially
available satellite modems
• 3 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires any Ku-band
satellite within 2 minutes
• Locates satellites using the most advanced satellite
acquisition methods
• Supports Prodelin 1.2m antenna, Model 1132/1134
• Standard 2 year warranty
Application Versatility
If you operate in Ku-band, the 1200 system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
1200
Technical specifications
Mechanical Physical
Reflector 1.2m Prime Focus, Offset Feed, SMC (1) Mounting Plate L: 132 cm (52”) W: 56 cm (22”)
Platform Geometry Elevation Over Azimuth Stowed Reflector Ext. Dims L: 177 cm (69.75”) W: 123 cm (48.6”)
Deployment Sensors GPS antenna H: 49 cm (19.25”) (5)
Compass ± 2º Deployed Height 168 cm (66”)
Tilt sensor ± 0.1º Reflector Weight 15.9 kg (35 lbs)
Azimuth Full 360º in overlapping 200º sectors Total Weight w/Reflector 92.5 kg (204 lbs)
Elevation 0 - 78º (2)
Polarization ±90º RF Interface
Elevation Deploy Speed Variable 2º/sec typ.
Radio Mounting Feed Arm / Rear of Base / Inside Vehicle
Azimuth Deploy Speed Variable 15º/sec Max., 10º/sec typ.
Axis Transition Twist-Flex Waveguide
Peaking Speed 0.2º/sec
Waveguide WR75 Cover Flange Interface
Coaxial RG6U from Feed Arm to Base
Electrical Feed 2 port Xpol
Rx & Tx cable 2 RG6 cables - 9.1m (30 ft) each Motors
Control cables
Standard: 9.1 m (30 ft) Ext. Cable with MIL Connectors Electrical Interface 12VDC 15 Amp (Max.)
Optional: up to 60 m (200 ft) available
Shipping Weights & Dimensions*
Ku-band (Linear) X-band (Circular)
Transmit Power (3) 1 to 200 Watt 1 to 40 Watt Platform Crate: 168 cm x 89 cm x 77 cm (66” x 35” x 30”), 59.5 kg (131 lbs)
Receive Frequency (GHz) 10.70 - 12.75 (4) 7.25 - 7.75 Platform: 76.5 kg (168 lbs) 7000C Controller: 6 kg (13 lbs) Cables: 5 kg (11 lbs)
Transmit Frequency (GHz) 13.75 - 14.50 7.90 - 8.40 Reflector Crate: 145 cm x 15 cm x 130 cm (57” x 6” x 51” ), 22 kg (48 lbs)
Midband Gain(±0.2 dB) Total Weight: 169 kg (371 lbs)
(Rx) 41.50 37.40 1-Piece Transportable Case: (Optional)
(Tx) 43.00 38.10 219 cm x 143 cm x 84 cm (86” x 56” x 33” ), Appr. 164 kg (362 lbs)
Antenna Noise Temp. (K) 20° EL=46 / 30° EL=43 20°EL=51.6
2-Piece Plastic Transportable Cases: (Optional)
Sidelobe Envelope, Co-Pol (dBi) Platform: 178 cm x 69 cm x 74 cm (70” x 27” x 29”), 149 kg (328 lbs)
1º < Ø < 20º 29 - 25 Log Ø DSCS Req. Reflector: 132cm x 25cm x 147cm (52” x 10” x 58” ), 49 kg (109 lbs)
20º < Ø < 26.3º -3.5 Total Weight: 198 kg (437 lbs)
26.3º < Ø < 48º 32 - 25 Log Ø
48º < Ø < 180º -10 (averaged) 2-Piece Metallic Transportable Cases: (Optional)
Cross-Polarization Platform: 178 cm x 76 cm x 74 cm (70” x30” x 29”), 161.5 kg (356 lbs)
-30 dB (Max.) Reflector: 132cm x 25cm x 147cm (52” x 10” x 58” ), 50 kg (110 lbs)
Within 1 dB contour
Total Weight: 211.5 kg (466 lbs)
Any angle off axis -25 dB (Max.)
VSWR 1.3:1 (Max.) 1.25:1 (Max.) * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Environmental
Survival Notes:
(1) Antenna based on Prodelin, Model 1132 / 1134
Wind Deployed 112 km/h (70 mph) (2) Adjustable at the time of order to support higher elevation angle (Optional)
Wind Stowed 225 km/h (140 mph) (3) Depending on size and weight for feed arm mounting limitation
(4) LNB PLL Type required with stability better than ± 25 KHz
Temperature -40ºC to 65ºC (-40°F to 150°F)
(5) Lower stow height option available (approx 4 cm lower)
Operational
Wind 72 km/h (45 mph)
Temperature -32ºC to 55ºC (-26°F to 130°F)
1500
Technical specifications
The iNetVu® 1500 Drive-Away Antenna is a 1.5m auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for Broadband
Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite acquisition within
minutes, anytime anywhere.
• Features
• One-Piece precision mold, offset feed, carbon fibre reflector
• Heavy duty platform for up to 11kg (25 lbs) RF Electronics
(LNB & BUC)
• Designed to work with the iNetVu® 7000C Controller
• Works seamlessly with the world’s most popular
commercially available satellite modems
• 3 Axis motorization
• Supports manual control when required
• One button, auto-pointing Controller acquires any Ku or C
band satellite within 2 minutes
• Locates satellites using the most advanced satellite
acquisition methods
• Standard 2 year warranty
Application Versatility
If you operate in Ku or C band, the 1500 system is easily configured to provide instant access to satellite communications for any application
that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
1500
Technical specifications
Mechanical Motors
Reflector 1.5m Carbon Fibre Electrical Interface 12VDC 15 Amp (Max.)
Platform Geometry Parabolic Single Offset, 0.78 F/D (16.9º offset)
Deployment Sensors GPS antenna 2 Port Cross Pol (Ku-Band) Receive Transmit
Compass ± 2º
Tilt sensor ± 0.2º Standard Frequency (GHz) 10.70-12.75 (1) 13.75-14.50
Azimuth Full 360º in overlapping 200º sectors Midband Gain (± .2 dBi) 43.70 45.00
Elevation 0 - 75º Cross Pol: On Axis -35 dB
Polarization ±90º in 1 dB BW -28 dB
Elevation Deploy Speed Variable 2º/sec typ. Sidelobe Compliances Meets ITU 580, INTELSAT
Azimuth Deploy Speed Variable 15º/sec Max., 10º/sec typ. Isolation: Tx / Rx -85 dB 0 dBm input
Peaking Speed 0.2º/sec Rx / Tx 0 dB input -35 dB
Antenna Noise Temp. (˚K) 10˚ EL= 65 / 20˚ EL= 58
VSWR 1.50:1 1.30:1
Environmental
Survival
2 Port C-Band (Linear) Receive Transmit
Wind Deployed 112 km/h (70 mph)
Wind Stowed 225 km/h (140 mph) Standard Frequency (GHz) 3.40-4.20 (1) 5.850-6.725
Temperature -40ºC to 65ºC (-40°F to 150°F) INSAT Frequency (GHz) 4.50-4.80 6.725-7.025
Rain 15 cm/h (6 in/h) Midband Gain (± .2 dBi) 33.40 37.20
Operational Cross Pol: On Axis (Std) -30 dB
Rain 10 cm/h (4 in/h) On Axis (INSAT) -35 dB
Wind 72 km/h (45 mph) in 1 dB BW -26 dB -26 dB
Temperature -30ºC to 55ºC (-22°F to 130°F) Sidelobe Compliances IESS 601 Std G
Relative Humidity 0 - 100% Isolation: Tx / Rx (Std) -60dB 0 dBm input
Solar Radiation 360 btu/h/ft2 (1000 Kcal/h/m) Tx / Rx (INSAT) -70 dB
Radial Ice (survival) 2.54 cm (1”) Rx / Tx 0 dBm input -35 dB
Corrosive Atmosphere As encountered in coastal / industrial areas Antenna Noise Temp. (K) 10˚ EL= 45 / 20˚ EL= 40
VSWR 1.50:1 1.30:1
Electrical
2 Port C-Band (Circular) Receive Transmit
Tx & Rx cables 2 RG6 cables - 9.1m (30 ft) each
Control Cables Standard Frequency (GHz) 3.625-4.20 (1) 5.85-6.425
Standard 9.1m (30 ft) Ext. Cable with MIL Connectors Midband Gain (± .2 dBi) 33.30 37.10
Optional up to 60 m (200 ft) available Sidelobe Envelope, Co-Pol (dBi)
2.8˚ < Ø < 20˚ 29 - 25 Log Ø
20˚ < Ø < 26.3˚ -3.5
RF Interface
26.3˚ < Ø < 48˚ 32-25 Log Ø
Radio Mounting Feed Arm / Rear of Base / Inside Vehicle 48˚ < Ø < 180˚ -10
Axis Transition Twist-Flex Waveguide Feed Interface CPR-229n Type N or CPR- 137
Waveguide WR75 Cover Flange Interface Isolation (Port to Port) -60dB -60dB
Coaxial RG6U from Feed Arm to Base Antenna Noise Temp.(K) 10˚EL= 41 / 20˚EL= 36
Feed 2 port Xpol VSWR 1.50:1 1.30:1
VSWR 1:3:1 (Max.)
Shipping Weights & Dimensions*
Physical
Crate: 213cm x 89cm x 84cm (84” x 35” x 33”), 64.5 kg (142 lbs)
Mounting Plate L: 132 cm (52”) W: 56 cm (22”) Platform: 75.9 kg (167 lbs); 7024C Controller: 6 kg (13 lbs) ; Cables: 5 kg (11 lbs)
Stowed Reflector Ext. Dims L: 189 cm (74.5”) W:154 cm (60.5”) Reflector Crate: 168cm x 168cm x 48cm (66” x 66” x 19”), 115 kg (256 lbs)
H: 49 cm (19.25”) Total, Platform Crate and Reflector Crate, 2 – Pieces: 267kg (589 lbs)
Deployed Height 180 cm (71”)
* The shipping weights/dims can vary for particular shipments depending on actual
Reflector Weight 11.3 kg (25 lbs) system configuration, quantity, packaging materials and special requirements
Total Weight w/Reflector 87 kg (192 lbs)
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
1800+
Technical specifications
The iNetVu® 1800+ Drive-Away Antenna is a 1.8m auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for Broadband
Internet Access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite acquisition within
minutes, anytime anywhere.
Features
• One-Piece precision offset, thermoset-molded
reflector with back cover
• Heavy duty feed arm capable of supporting up to
11kg (25 lbs) RF Electronics (LNB & BUC)
• Designed to work with the iNetVu® 7000C controller
• Works seamlessly with the world’s most popular
commercially available satellite modems
• 3 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires any Ku
or C band satellite within 2 minutes
• Locates satellites using the most advanced satellite
acquisition methods
• Supports Skyware Global 1.8m antenna Type 183
• Standard 2 year warranty
Application Versatility
Whether you operate in Ku or C band, the 1800+ system is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration,
Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
1800+
Technical specifications
Mechanical Ku-Band (Linear Orthogonal) Receive Transmit
Reflector 1.8m prime focus, offset feed, SMC (1) Transmit Power (1 to 200 watt (2))
Platform Geometry Elevation over Azimuth Frequency (GHz) 10.70-12.75 13.75-14.50
Deployment Sensors GPS Antenna Compass ± 2º, Tilt Sensor ± 0.2º Feed Interface WR75 WR75
F/D Ratio 0.61 Efficiency 70% 70%
Azimuth Full 360º in overlapping, 200º sectors Midband Gain (± 0.2dBi) 45.30 46.80
Elevation 0º to 75º (Optional - up to 80º) Antenna Noise Temp. (K) 10º EL= 43 / 20º EL= 28 / 30º EL=23
Polarization ± 90º Sidelobe Envelope, 1º<Θ<20º 29-25 Log Θ
Elevation Deploy Speed Variable 2º /sec typ. Co-Pol (dBi) 20º<Θ<26.3º -3.5
Azimuth Deploy Speed Variable 15º /sec typ. , 10º /sec typ. 26.3º<Θ<48º 32-25 Log Θ
Peaking Speed 0.1º /sec 48º<Θ<180º -10 (Average)
Motor Voltage 12VDC 15 Amp (Max.) Cross-Polarization on Axis -30 dB
Within 0.5 dB Beamwidth -26 dB
Environmental
Isolation (Port to Port) 35 dB 80 dB
Wind loading
Operational 72 km/h (45 mph) C-Band (Linear) Receive Transmit
Survival
Deployed 112 km/h (70 mph) Standard Frequency (GHz) 3.4-4.2 5.850-6.725
Stowed 225 km/h (140 mph) INSAT Frequency (GHz) 4.5-4.8 6.725-7.025
Temperature Feed Interface WR229 WR137 or Type N
Operational -32º to 55º C (-26º to 130º F) Midband Gain (± 0.3dBi) 35.40 39.30
Survival -40º to 65º C (-40º to 149º F) Antenna Noise Temp. (K) 10º EL= 41 / 20º EL= 36 / 30º EL=33
Sidelobe Envelope, 2.5º<Θ<20 29-25 Log Θ
Electrical
Co-Pol (dBi) 20º<Θ<26.3º -3.5
26.3º<Θ<48º 32-25 Log Θ
Rx & Tx Cables 2 RG6 Cables 48º<Θ<180º 10 (Average)
Control Cables Cross-Pol: on Axis -30 dB
Standard 9.1 m (30 ft) Extension Cable INSAT Axis -35 dB
Optional Up to 45 m (150 ft) available Isolation (Port to Port) 60 dB 60 dB
RF Interface
C-Band (Circular) Receive Transmit
Radio Mounting Feed arm/ Inside vehicle
Coaxial RG6U from feedhorn to base plate Standard Frequency (GHz) 3.625-4.20 5.85-6.425
Axis Transition Twist-Flex Waveguide Feed Interface WR229 WR137 or Type N
Electrical Interface 9.1m (30 ft) ext. cables w/MIL connectors Midband Gain (± 0.4dBi) 35.40 39.50
VSWR Tx 1.3:1 Antenna Noise Temp. (K) 10º EL= 41 / 20º EL= 36 / 30º EL= 33
Sidelobe Envelope, 2.8º<Θ<20º 29-25 Log Θ
Physical
Co-Pol (dBi) 20º<Θ<26.3º -3.5
26.3º<Θ<48º 32-25 Log Θ
Mounting Plate L: 132 cm (52”) W: 71 cm (28”) 48º<Θ<180º -10 (Average)
Stowed Dimensions L: 249 cm (98”) W: 188 cm (74”) Isolation (Port to Port) 60 dB 60 dB
H: 67 cm (26.4”)
Deployed Height 248 cm (97.6”) Shipping Weights & Dimensions*
Total Weight (w reflector) 162 kg (358 lbs) Crate: 213cm x 89cm x 84cm (84” x 35” x 33”), 55 kg (121 lbs)
Reflector Weight 37 kg (81 lbs) Platform: 123 kg (272 lbs); 7024C Controller: 6 kg (13 lbs); Cables: 5 kg (11 lbs)
Total Platform Weight 125 kg (275 lbs) Reflector Box (Reflector, Back Cover included) on Pallet, wood:
208cm x 206cm x 38cm (82” x 81” x 15”), 102 kg (225 lbs)
Total weight on Pallet, 2 – Pieces: 292 kg (642 lbs)
* The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Technical specifications
Fly-Away
Antennas
Fly-Aways
Technical specifications
FLY-75V
Technical specifications
The iNetVu® FLY-75V Flyaway Antenna is a 75 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
“Authorized for use on ViaSat Exede® Enterprise and on KA-SAT NEWSSPOTTER NEWSGATHERING service by Eutelsat* ”
Features
• One-Piece, high surface accuracy, offset feed, steel reflector
• Heavy duty feed arm now supports both type of Transceivers:
Standard Tria and new eTRIA
• Designed to work with the iNetVu® 7710 Controller
• Works seamlessly with the world’s emerging commercial
ViaSat/KA-SAT satellite Surfbeam II/PRO Auto-acquire modems
• Auto beam select on KA-SAT Tooway services
• 2 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires Ka-band
satellite within 2 minutes
• Captive hardware / Fasteners
• 10 minute assembly by one person, no tools required
• Compact packaging; 2 ruggedized cases
• Supports Skyware Global 75 cm Ka antenna
• Standard 2 year warranty
EXEDE® ENTERPRISE
AU T H O R I Z E D E Q U I P M E N T
Application Versatility
If you operate in Ka-band, the FLY-75V system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ka terminal delivers affordable broadband
Internet services (High-speed access, Video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
* http://www.eutelsat.com/files/contributed/support/pdf/Eutelsat_Broadband_Services.pdf (p.14)
FLY-75V
Technical specifications
Mechanical RF Interface
Reflector 75cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from transceiver to tripod base
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Elevation 0 - 90º Case 1: Tripod/Reflector L: 85 cm (33.5”) W: 85 cm (33.5”)
Polarization Circular, Auto-switching H: 29 cm (11.5”) 32 Kg
Elevation Deploy Speed Variable , 3º/sec typ. Case 2: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
Azimuth Deploy Speed Variable 3º/sec typ. H: 38 cm (15.5”) 32 Kg
Peaking Speed 0.1º/sec
Motors
Electrical Interface 24VDC 8 Amp (Max.)
Environmental
Wind loading
Operational (no ballast) 50 km/h (30 mph) Shipping Weights & Dimensions*
Operational (with ballast) 72 km/h (45 mph)
Temperature Case 1: 85 cm x 85 cm x 29 cm (33.5” x 33.5” x 11.5”); 32 kg
Operational -30º to 60º C (-22º to 140º F)
Case 2: 44.5 cm x 80 cm x 38 cm (17.5” x 31.5” x 15.5”); 32 kg
Survival -40º to 65º C (-40º to 149º F)
* The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Thermal Test per MIL-STD-810F, Method 501.4/502.4, High/Low Temperatures
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27, Appendix A, Water Ingress Rating: IP-66
Electrical
Rx & Tx Cable Single IFL, RG6 cable - 10 m (33 ft)
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency (GHz) 18.30 - 20.20 28.10 - 30.00
Feed Interface (Circular) RG6 RG6
Nominal G/T 17.5 dB/K
Nominal EIRP 48.4 dBWi
FLY-981
Technical specifications
The iNetVu® FLY-981 Flyaway Antenna is a 98 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
Features
• One-Piece, high surface accuracy, offset feed, steel reflector
• Heavy duty feed arm capable of supporting up to 5kg (10lbs)
RF Electronics (LNB & BUC)
• Designed to work with the iNetVu® 7710 Controller
• Works seamlessly with the world’s most popular commercially
available Ku modems
• Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires Ku-band
satellite within 2 minutes
• Captive hardware / Fasteners
• 10 minute assembly by one person, no tools required
• Compact packaging; 3 ruggedized cases
• Standard 2 year warranty
Application Versatility
If you operate in Ku-band, the FLY-981system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ku terminal delivers affordable broadband
Internet services (High-speed access, Video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
FLY-981
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type to tripod base (N Type Optional)
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Elevation 0 - 90º Case 1: Reflector L: 109 cm (43” ) W: 109 cm (43”)
Polarization ± 90º H: 29 cm (11.5”) 28.6 Kg (63 lbs)
Elevation Deploy Speed Variable , 3º/sec typ. Case 2: Tripod/Feed arm L: 122 cm (48”) W: 58 cm (23”)
Azimuth Deploy Speed Variable 3º/sec typ. H: 28cm (11”) 27.7 Kg (61 lbs)
Peaking Speed 0.1º/sec Case 3: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
H: 38 cm (15.5”) 34 Kg (75 lbs)
Environmental
Motors
Wind loading
Operational (no ballast) 50 km/h (30 mph) Electrical Interface 24VDC 8 Amp (Max.)
Operational (with ballast) 72 km/h (45 mph)
Temperature
Operational -30º to 60º C (-22º to 140º F)
Survival -40º to 65º C (-40º to 149º F) Shipping Weights & Dimensions*
Water Ingress Rating IP-66
Skid: 132 cm x 137 cm x 121.9 cm (52” x 54” x48”) 23.1 Kg (51lbs)
Total weight of system in cases: 90.3 Kg (199 lbs)
Electrical Total weight of system in cases on skid: 113.4 Kg (250 lbs)
Rx & Tx Cables 2 RG6 cables -10 m (33 ft) each *The shipping weights/dims can vary for particular shipments depending on actual system
Control Cables configuration, quantity, packaging materials and special requirements
Receive Transmit
Frequency (GHz) 10.70-12.75 (1) 13.75-14.50
Feed Interface WR-75 WR-75
Midband Gain (± 0.2 dBi) 39.70@12.00 GHz 41.20@14.30 GHz
Antenna Noise Temp. (K) 10º EL=53 / 20º EL= 39 / 30º EL= 32 Max.
Sidelobe Envelope Co-Pol (dBi)
1.8º < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -30 dB in 1 dB Contour
VSWR 1.5:1 1.3:1
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
FLY-98G
Technical specifications
The iNetVu® FLY-98G Flyaway Antenna is a 98 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
Features
Application Versatility
If you operate in Ka-band, the FLY-98G system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ka terminal delivers affordable broadband
Internet services (High-speed access, Video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
FLY-98G
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type to tripod base
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Elevation 0 - 90º Case 1: Reflector L: 109 cm (43” ) W: 109 cm (43”)
Polarization ± 45º, Circular Auto H: 29 cm (11.5”) 28.6 Kg (63 lbs)
Elevation Deploy Speed Variable , 3º/sec typ. Case 2: Tripod/Feed arm L: 122 cm (48”) W: 58 cm (23”)
Azimuth Deploy Speed Variable 3º/sec typ. H: 28cm (11”) 27.7 Kg (61 lbs)
Peaking Speed 0.1º/sec Case 3: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
H: 38 cm (15.5”) 34 Kg (75 lbs)
Environmental
Motors
Wind loading
Operational (no ballast) 50 km/h (30 mph) Electrical Interface 24VDC 8 Amp (Max.)
Operational (with ballast) 72 km/h (45 mph)
Temperature
Operational -30º to 60º C (-22º to 140º F) Shipping Weights & Dimensions*
Survival -40º to 65º C (-40º to 149º F)
Water Ingress Rating IP-66 Skid: 132 cm x 137 cm x 121.9 cm (52” x 54” x48”) 23.1 Kg (51lbs)
Total weight of system in cases: 90.3 Kg (199 lbs)
Total weight of system in cases on skid: 113.4 Kg (250 lbs)
Electrical * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Rx & Tx Cables 2 RG6 cables -10 m (33 ft) each
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency ( GHz) 19.20 - 20.20 29.50 - 30.0
Feed Interface (Circular) RG6 RG6
Midband Gain (+-0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75 GHz
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -24 dB > -22 dB
VSWR 1.3:1
FLY-98V
Technical specifications
The iNetVu® FLY-98V Flyaway Antenna is a 98 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
“Compliant for use on ExedeSM Ka Service by ViaSat and on KA-SAT NEWSSPOTTER NEWSGATHERING service by Eutelsat”
Features
Application Versatility
If you operate in Ka-band, the FLY-98V system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ka terminal delivers affordable broadband
Internet services (High-speed access, Video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
FLY-98V
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type to tripod base
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Case 1: Reflector L: 109 cm (43” ) W: 109 cm (43”)
Elevation 0 - 90º
H: 29 cm (11.5”) 28.6 Kg (63 lbs)
Polarization Circular, Auto-switching
Case 2: Tripod/Feed arm L: 122 cm (48”) W: 58 cm (23”)
Elevation Deploy Speed Variable , 3º/sec typ.
H: 28cm (11”) 27.7 Kg (61 lbs)
Azimuth Deploy Speed Variable 3º/sec typ.
Case 3: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
Peaking Speed 0.1º/sec
H: 38 cm (15.5”) 34 Kg (75 lbs)
Motors
Environmental
Electrical Interface 24VDC 8 Amp (Max.)
Wind loading
Operational (no ballast) 50 km/h (30 mph)
Operational (with ballast) 72 km/h (45 mph)
Temperature Shipping Weights & Dimensions*
Operational -30º to 60º C (-22º to 140º F) Skid: 132 cm x 137 cm x 121.9 cm (52” x 54” x48”) 23.1 Kg (51lbs)
Survival -40º to 65º C (-40º to 149º F) Total weight of system in cases: 90.3 Kg (199 lbs)
Water Ingress Rating IP-66 Total weight of system in cases on skid: 113.4 Kg (250 lbs)
Electrical * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Rx & Tx Cable Single IFL, RG6 cable - 10 m (33 ft)
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency (GHz) 18.30 - 20.20 28.10 - 30.00
Feed Interface (Circular) RG6 RG6
Midband Gain (+-0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75 GHz
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
VSWR 1.3:1
FLY-98H
Technical specifications
The iNetVu® FLY-98H Flyaway Antenna is a 98 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
Features
Application Versatility
If you operate in Ka-band, the FLY-98H system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ka terminal delivers affordable broadband
Internet services (High-speed access, Video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
FLY-98H
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type to tripod base
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Elevation 0 - 90º Case 1: Reflector L: 109 cm (43” ) W: 109 cm (43”)
Polarization ± 45º, Circular Manual H: 29 cm (11.5”) 28.6 Kg (63 lbs)
Elevation Deploy Speed Variable , 3º/sec typ. Case 2: Tripod/Feed arm L: 122 cm (48”) W: 58 cm (23”)
Azimuth Deploy Speed Variable 3º/sec typ. H: 28cm (11”) 27.7 Kg (61 lbs)
Peaking Speed 0.1º/sec Case 3: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
H: 38 cm (15.5”) 34 Kg (75 lbs)
Environmental Motors
Wind loading Electrical Interface 24VDC 8 Amp (Max.)
Operational (no ballast) 50 km/h (30 mph)
Operational (with ballast) 72 km/h (45 mph)
Temperature Shipping Weights & Dimensions*
Operational -30º to 60º C (-22º to 140º F)
Survival -40º to 65º C (-40º to 149º F) Skid: 132 cm x 137 cm x 121.9 cm (52” x 54” x48”) 23.1 Kg (51lbs)
Water Ingress Rating IP-66 Total weight of system in cases: 90.3 Kg (199 lbs)
Total weight of system in cases on skid: 113.4 Kg (250 lbs)
Electrical * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Rx & Tx Cables 2 RG6 cables -10 m (33 ft) each
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency ( GHz) 19.20 - 20.20 29.50 - 30.0
Feed Interface (Circular) RG6 RG6
Midband Gain (+-0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75 GHz
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -24 dB > -22 dB
VSWR 1.3:1
ACFLY-1200
Technical specifications
The iNetVu® Airline Checkable Flyaway antenna system is a highly portable unit with a 6-piece carbon fibre reflector that can fit in a suitcase. It is
configurable with the auto-pointing iNetVu® 7024C Controller, cables and another electronic device such as a modem or PowerSmart power supply
that can be installed in the second case.
Features
Application Versatility
The Airline Checkable Flyaway system is easily configured to provide instant access to satellite communications for any application that requires
remote connectivity in a rugged environment. Ideally suited for applications that require a quick, simple set-up; vertical markets such as Disaster
Management, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services will benefit tremendously from the ACFLY’s
ease of deployment.
ACFLY-1200
Technical specifications
Mechanical Motors
Reflector 1.2m Offset Feed, carbon fibre Electrical Interface 24VDC 5 Amp (Max.)
Platform Geometry Elevation over Azimuth
Offset Angle 15º
Antenna Optics Single Offset Cases
Azimuth ± 180º
Case1: 6-piece antenna platform
Elevation 10º - 90º
48.5 x 71 x 39 cm (19” x 28” x 15.3”), 32 kg (70 lbs)
Polarization ± 95º
Case 2: 3U Rack mount including iNetVu® 7024 Controller + feed + cables:
Elevation Deploy Speed Variable 2º /sec typ.
48.5 x 71 x 39 cm (19” x 28” x 15.3”), 32 kg (70 lbs)
Azimuth Deploy Speed Variable 5º /sec typ.
Case 3 (Optional): 4U Rack mount
Peaking Speed 0.1 /sec
62.2 x 34.3 x 47.6 cm (24.5” x 13.5” x 18.8”),10.7 kg (23.5 lbs)
Environmental
Ku-Band (Linear)
Wind loading
Transmit Power 1 to 200 watt
Operational
Feed 2 Port XPol
With Ballast / Anchors 50 km/h (31 mph)
Receive Transmit
Survival 145 km/h (90 mph)
Frequency (GHz) 10.70 - 12.75 (1) 13.75 - 14.50
Temperature
Feed Interface WR75 WR75
Operational -30º to 55º C (-22º to 131º F)
Efficiency 70% 70%
Solar Radiation 360 BTU/h/sq. ft.
Midband Gain (± .2 dBi) 41.50 43.00
Rain 1.3cm/h (0.51 in/h)
Antenna Noise Temp. (K) 10º EL= 45 / 30º EL= 24
Sidelobe Envelope Co-Pol (dBi)
Vibration per MIL-STD-810F, Annex A, Category 4, Truck/trailer/tracked
1.5º<Θ<20º 29-25 Log Θ
Shock Test per IEC 60068-2-27
20º<Θ<26.3º -3.5
Bump Test per IEC 60068-2-29
26.3º<Θ<48º 32-25 Log Θ
Drop and Topple per IEC 60068-2-31
48º<Θ -10 Typical
Free- Fall Drop per IEC 60068-2-32, and ISTA 1A
Cross-Polarization on Axis >35 dB
Dust and Water Ingress per IEC 60529, IP66
Within 1dB Beamwidth >30 dB
Return Loss 17.7 dB typ. 20 dB typ.
Insertion Loss 0.3 dB typ. 0.1 dB typ.
Electrical Tx/Rx Isolation 40 dB 90 dB
Rx & Tx Cables 2 RG6 Cables -10m (33 ft) each VSWR 1.3:1 1.3:1
Control Cables
Standard 10m (33 ft) Ext. Cable
Optional Up to 60m (200 ft) available Shipping Weights & Dimensions*
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
FLY-1201
Technical specifications
The iNetVu® 1.2m Flyaway Antenna System is a highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7024C Controller
and can be assembled in less than 15 minutes by one person. The antenna features a 2-piece segmented glass fibre reinforced reflector with compact
pedestal and is designed to be cost-effective while providing exceptional performance in a light weight package.
Features
• One button auto-pointing controller
• 3 Axis motion (Ku-band), 2 axis (X-band)
• Airline transportable
• Supports manual control when required
• Designed to work with the iNetVu® 7024C Controller
• Captive hardware / fasteners
• 1.2m offset, prime focus, 2-piece thermoset molded reflector
• Supports Skyware 1.2m antenna, Type 125
• No tools required for assembly / disassembly
• Less than 15 minutes assembly time, one person job
• Elevation-over-azimuth pedestal provides excellent
stiffness characteristics and convenience for the user
• Eutelsat / Intelsat compliant
• Compact packaging, 4 ruggedized shipping cases
• Minimal maintenance required
• Standard 2 year warranty
Application Versatility
If you operate in Ku-band, the FLY-1201 Flyaway System is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Disaster Management,
Military, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
FLY-1201
Technical specifications
Electrical
Shipping Weights & Dimensions*
Electrical interface 24VDC 8 Amp (Max.)
Rx & Tx cables 2 RG 6 cables - 10 m (33 ft) each Transportable Case and Reflector:
Control cables Tripod Case: 97 cm x 71 cm x 38 cm (38’’ x 28’’ x 15’’), 45 kg (100 lbs)
Standard 10m (33 ft) ext. cable Feed Arm Case: 121 cm x 56 cm x 25 cm (47’’ x 22’’ x 10’’), 20.5 kg (45 lbs)
Reflector Case: 132 cm x 31 cm x 76 cm (52’’ x 12’’ x 30’’), 34 kg (74 lbs)
Optional up to 60m (200 ft) available
Controller Case: 71 cm x 51 cm x 74 cm (28’’ x 20’’ x 29’’), 36 kg (80 lbs)
Notes:
(1) Depending on size and weight for feed arm mounting limitation
(2) LNB PLL Type required with stability better than ± 25 KHz
FLY-1202
Technical specifications
The iNetVu® 1.2m Flyaway Antenna System is a highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7024C Controller
and can be assembled in less than 15 minutes by one person. The antenna features a 2-piece segmented glass fibre reinforced reflector with compact
pedestal and is designed to be cost-effective while providing exceptional performance in a light weight package.
Features
• One button auto-pointing controller
• 3 Axis motion (Ku-band), 2 axis (X-band)
• Airline transportable
• Supports manual control when required
• Designed to work with the iNetVu® 7024C Controller
• Captive hardware / fasteners
• 1.2m offset, prime focus, 2-piece thermoset molded reflector
• Supports General Dynamics Series 3122 1.2m antenna
• No tools required for assembly / disassembly
• Less than 15 minutes assembly time, one person job
• Elevation-over-azimuth pedestal provides excellent
stiffness characteristics and convenience for the user
• Eutelsat / Intelsat compliant
• Compact packaging, 4 ruggedized shipping cases
• Minimal maintenance required
• Standard 2 year warranty
Application Versatility
If you operate in Ku-band, the FLY-1202 Flyaway System is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Disaster Management,
Military, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
FLY-1202
Technical specifications
RF Interface
Shipping Weights & Dimensions*
Radio mounting Feed arm
Coaxial RG6U F type (N type optional) TBD
* The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Electrical
Electrical interface 24VDC 8 Amp (Max.)
Rx & Tx cables 2 RG 6 cables - 10 m (33 ft) each
Control cables
Standard 10m (33 ft) ext. cable
Optional up to 60m (200 ft) available
Notes:
(1) Depending on size and weight for feed arm mounting limitation
(2) LNB PLL Type required with stability better than ± 25 KHz
FLY-1202V
Technical specifications
The new iNetVu® 1.2m Flyaway Ka-band Antenna System is a highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7710
Controller and can be assembled in less than 15 minutes by one person. The antenna features a 2-piece segmented glass fibre reinforced reflector with
compact pedestal and is designed to be cost-effective while providing exceptional performance in a light weight package.
Field Upgradable to Ku
Features
• One button auto-pointing controller
• 2 Axis motion Ka-band
• Airline transportable
• Supports manual control when required
• Designed to work with the iNetVu® 7710 Controller
• Captive hardware / fasteners
• 1.2m offset, prime focus, 2-piece thermoset molded reflector
• Supports General Dynamic 1.2m antenna
• No tools required for assembly / disassembly
• Less than 15 minutes assembly time, one person job
• Elevation-over-azimuth pedestal provides excellent
stiffness characteristics and convenience for the user
• ViaSat/Eutelsat compliant
• Compact packaging, 4 ruggedized shipping cases
• Minimal maintenance required
• Can be easily converted to support Ku-band
• Standard 2 year warranty
Application Versatility
If you operate in Ka-band, the FLY-1202V Flyaway System is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Disaster Management,
Military, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
FLY-1202V
Technical specifications
Electrical
Electrical interface 24VDC 8 Amp (Max.)
Rx & Tx cables Single IFL, RG6 cable - 10 m (33 ft)
Control cables
Standard 10m (33 ft) ext. cable
Optional up to 60m (200 ft) available
Note:
(1) Antenna based on General Dynamic
FLY-1202G
Technical specifications
The new iNetVu® 1.2m Flyaway Ka-band Antenna System is a highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7710
Controller and can be assembled in less than 15 minutes by one person. The antenna features a 2-piece segmented glass fibre reinforced reflector with
compact pedestal and is designed to be cost-effective while providing exceptional performance in a light weight package.
Field Upgradable to Ku
Features
• One button auto-pointing controller
• 2 Axis motion Ka-band; 3 Axis optional
• Airline transportable
• Supports manual control when required
• Designed to work with the iNetVu® 7710 Controller
• Captive hardware / fasteners
• 1.2m offset, prime focus, 2-piece thermoset molded reflector
• Supports General Dynamic 1.2m antenna
• No tools required for assembly / disassembly
• Less than 15 minutes assembly time, one person job
• Elevation-over-azimuth pedestal provides excellent
stiffness characteristics and convenience for the user
• Compliant with Avanti/Gilat Ka services
• Compact packaging, 4 ruggedized shipping cases
• Minimal maintenance required
• Can be easily converted to support Ku-band
• Optional 3W & 5W transceivers; higher BUCs also supported
• Standard 2 year warranty
Application Versatility
If you operate in Ka-band, the FLY-1202G Flyaway System is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Disaster Management,
Military, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
FLY-1202G
Technical specifications
Mechanical Ka-Band L
Antenna Size & Material 1.2m Glass fibre reinforced polyester (1) Receive Transmit
Platform Geometry Elevation over azimuth
Frequency (GHz) 19.20 - 20.20 29.50 - 30.00
Antenna optics 2-piece segmented
Midband Gain (± .2dB) 46.5 49.9
Optional 1-piece
EIRP (Nominal) 54 dBWi @ 29.75 GHz
Offset angle 16.97º
G/T (Nominal) 23.6 dB/K @ 19.95 GHz
Azimuth ±175º
Antenna Noise Temp. (K) 20º EL= 107 / 40º EL= 89
Elevation 5º to 90º
Sidelobe Envelope Co-Pol (dBi)
Polarization Circular, auto-switching
1.5º <Θ <20º 29-25 LogΘ
Elevation deploy speed Variable 6º / sec
20º <Θ < 26.3º -3.5
Peaking speed 0.2º / sec
26.3º <Θ < 48º 32-25 LogΘ
48º <Θ <180º -10 Typical
Environmental Cross Pol within 1dB contour > 22 dB > 22 dB
Wind loading VSWR 1.3:1 (Max.)
Operational
No ballast or anchors 48 km/h (30 mph) Ka-Band
(R/O Circular)
With ballast or anchors 72 km/h (45 mph) Receive
Temperature Frequency (GHz) 17.0 – 22.2
Operational -30º to 60º C (-22º to 140º F) Feed Interface WR42
Survival -40º to 65º C (-40º to 149º F)
Rain Cases
Operational 10 cm/h
Survival 15 cm/h Case 1: Reflector 134.6 x 40.6 x 94 cm (53” x 16” x 37”); 46.6kg (103 lbs)
Solar radiation 360 BTU / h / sq. ft Case 2: AZ/EL Base 61 x 38.1 x 50.8 cm (24” x 15” x 20”); 23.2kg (71.5lbs)
Case 3: Tripod/Feed 72.4 x 59.7 x 30.5 cm (58.5” x 23.5” x 12”);34.2Kg (74lbs);
Case 4: 6U Rack Mount 74 x 51 x 72 cm (29” x 20” x 28”); 32 kg (70 lbs)
RF Interface
Radio mounting Feed arm Shipping Weights & Dimensions
Feed RG6 F type
TBD
Electrical
Electrical interface 24VDC 8 Amp (Max.)
Rx & Tx cables 2 RG6 cables
Control cables
Standard 10m (33 ft) ext. cable
Optional up to 60m (200 ft) available
Note:
(1) Antenna based on General Dynamic/Skyware Global
FLY-1801
Technical specifications
The iNetVu® FLY-1801 Antenna is a 1.8m highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7710 Controller and can
be assembled in less than 20 minutes by one person. The antenna features a 6-piece carbon fibre reflector with compact pedestal and is designed to be
cost-effective while providing exceptional performance in a light weight package.
Features
Application Versatility
Whether you operate in Ku or C band, the 1.8m Flyaway system is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Disaster Management,
Military, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
FLY-1801
Technical specifications
Mechanical Ku-Band (Linear Orthogonal) Receive Transmit
Reflector 1.8m offset feed, Carbon Fibre
Transmit Power (1) 1 to 200 watt
Platform Geometry Elevation over Azimuth
Frequency (GHz) 10.95-12.75 (2) 13.75-14.50
Deployment Sensors GPS Antenna Compass ± 2º, Tilt Sensor ± 0.2º
Feed Interface WR75 WR75
F/D Ratio 0.80
Efficiency 70% 70%
Azimuth Full 360º in overlapping, 190º sectors
Midband Gain (± 0.2dBi) 45.30 46.50
Elevation 0º to 90º
Antenna Noise Temp. (K) 10º EL= 60 / 20º EL= 53
Polarization ± 95º
Sidelobe Envelope, 1º<Θ<20º 29-25 Log Θ
Elevation Deploy Speed Variable 5º /sec, 2º /sec typ.
Co-Pol (dBi) 20º<Θ<26.3º -3.5
Azimuth Deploy Speed Variable 8º /sec, 2º /sec typ.
26.3º<Θ<48º 32-25 Log Θ
Peaking Speed 0.2º /sec
48º<Θ<180º -10 (Average)
Peaking Accuracy ±0.1º
Cross-Polarization on Axis -35 dB -35 dB
Motor Voltage 24VDC 14.5 Amp (Max.)
Within 1dB Beamwidth -28 dB -28 dB
Environmental Isolation (Port to Port) 30 dB 85 dB
Wind loading
Operational (no ballast) 40 km/h (25 mph) C-Band (Linear) Receive Transmit
Operational (with ballast) 72 km/h (45 mph) Standard Frequency (GHz) 3.40-4.20 5.850-6.725
Temperature Feed Interface WR229 WR137 or Type N
Operational -30º to 60º C (-22º to 140º F ) Midband Gain (± 0.3 dBi) 35.40 39.30
Survival -40º to 65º C (-40º to 149º F) Antenna Noise Temp. (K) 10º EL= 43 / 20º EL= 38
Water Ingress Rating IP-66 Sidelobe Envelope, 2.5º<Θ<20 29-25 Log Θ
Co-Pol (dBi) 20º<Θ<26.3º -3.5
Electrical
26.3º<Θ<48º 32-25 Log Θ
Rx & Tx Cables 2 RG6 Cables 48º<Θ<180º 10 (Average)
Control Cables Cross-Pol: on Axis -30 dB -30 dB
Standard 10 m (33 ft) Extension Cable Within 1dB Beamwidth -26 dB -26 dB
Optional Up to 60 m (200 ft) available Isolation (Port to Port) 30 dB 70 dB
RF Interface
Radio Mounting Feed arm C-Band (Circular) Receive Transmit
Coaxial RG6U Standard Frequency (GHz) 3.625-4.20 5.85-6.425
Axis Transition Rigid/Twist-Flex Waveguide Feed Interface WR229 Type N
Electrical Interface 10 m (33 ft) ext. cables w/MIL connectors Midband Gain (± 0.4dBi) 35.4 39.50
VSWR Rx 1.30:1 Tx 1.30:1 Antenna Noise Temp. (K) 10º EL= 55 / 20º EL= 50
Sidelobe Envelope, 2.8º<Θ<20º 29-25 Log Θ
Physical Co-Pol (dBi) 20º<Θ<26.3º -3.5
Total Weight (w Ku Option & Cases) 206 kg (453 lbs) 26.3º<Θ<48º 32-25 Log Θ
48º<Θ<180º -10 (Average)
Packaging Cases: Isolation (Port to Port) 30 dB 70 dB
Case 1: AZ Assembly: 56.9cm x 68.6cm x 71.1cm (22” x 27” x 28”); 43.6kg (96lbs)
Case 2: Tripod Assembly: 35.6cm x 35.6cm x 162.6cm (14” x 14” x 64”); 32kg (70.5lbs)
Case 3: EL Assembly: 66cm x 45.7cm x 139.7cm (26” x 18” x 55”); 35.2kg (77.5lbs) Shipping Weights & Dimensions
Case 4: Feedboom Assembly: 114.3cm x 45.7cm x 30.5cm (45” x 18” x 12”); 21.4kg TBD
(47lbs)
Case 5: Reflector Case A: 30.5cm x 76.2cm x 106.7cm (12” x 30” x 42”); 18.8kg (41.5lbs)
Case 6: Reflector Case B: 33cm x 76.2cm x 116.8cm (13” x 30” x 46”); 23.4kg (51.5lbs) Notes:
(1) Depending on size and weight of feed arm mounting limitation
Optional Feeds: Choose 1 or more (2) LNB PLL Type required with stability better than ± 25 KHz
Case 7: Ku-Linear POL + EL Actuator: 86.4cm x 66cm x 35.6cm (34” x 26” x 14”); 31.6kg
(70lbs)
Case 8: C-linear POL: 81.3cm x 50.8cm x 50.8cm (32” x 20” x 20”); 25.4kg (56lbs)
Case 9: C-Circular POL: 109.2cm x 50.8cm x 50.8cm (43” x 20” x 20”); 29.6kg (65.5lbs)
Technical specifications
FMA's
Fixed Motorized
Antennas
FMA’s
Technical specifications
FMA-120 FMA-120Ka
FMA-180 FMA-240
FMA-120
Technical specifications
The iNetVu® 120 Fixed Motorised Antenna system is a self-pointing auto-acquire unit that can be mounted either as a permanent installation or on a
portable fixed base. The antenna works seamlessly with the iNetVu® 7024C Controller.
Features
• 1.2m Offset, prime focus, thermoset-molded reflector
• Designed to work with the iNetVu® 7024C controller
• Works seamlessly with the world’s most popular commercially
available satellite modems
• 3 Axis motorization
• Supports manual control when required
• It is a cost effective solution for multi-satellite communication
at any location
• One button, auto-pointing controller acquires any
• Ku-band satellite within 2 minutes
• Locates satellites using the most advanced satellite acquisition
methods
• Eliminates costly repointing and network downtime due
to adverse weather conditions or areas where ground shifts
occur (earthquakes, landslides, mine blast zones, etc...)
• Can be easily relocated when mounted on a semi-permanent
platform without the need for any specialized equipment
• Any compatible fixed installation can be easily converted and
upgraded to a fully motorized system
• Supports Prodelin 1.2m antenna, Model 1132 / 1134
• System designed for relatively large BUCs, 9 kg (Max.) weight
for RF electronics (BUC and LNB)
• 1 year warranty
Application Versatility
The FMA-120 system is easily configured to provide instant access to satellite communications for any application that requires reliable and/
or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster Management,
Construction, Mobile Offices, Emergency Services, Cellular Backhaul and many others.
FMA-120
Technical specifications
Electrical
Elevation Motor 24VDC
Azimuth Motor 24VDC
Rx & Tx Cables 2 RG6 Cables -15m (50 ft) each
Control Cables
Standard 15m (50 ft) Ext. Cable
Optional Up to 60m (200 ft) available
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
FMA-120Ka
Technical specifications
The iNetVu® FMA-120Ka, Fixed Motorised Ka-band Antenna system is a self-pointing auto-acquire unit that can be mounted either as a permanent
installation or on a portable fixed base. The antenna works seamlessly with the iNetVu® 7024C Controller.
Features
• 1.2m Offset, prime focus, thermoset-molded reflector
• Designed to work with the iNetVu® 7024C controller
• Works seamlessly with the world’s most popular Ka-band
commercially available satellite services (Exede, Tooway and
iDirect)
• Supports 3W and 5W Transceivers
• 2 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires Ka-band
satellites within 2 minutes
• Locates satellites using the most advanced satellite acquisition
methods
• Eliminates costly repointing and network downtime due to
inadvertent motion, satellite change, areas where ground shifts
occur (earthquakes, landslides, mine blast zones, etc...)
• Can be easily relocated when mounted on a semi-permanent
platform without the need for any specialized equipment
• Any compatible fixed installation can be easily converted and
upgraded to a fully motorized system
• Supports ViaSat 1.2m Ka antenna, other Ka services can be
supported as required
• Can be easily converted to support Ku-band
• 1 year warranty
Application Versatility
If you operate in Ka-band, the FMA-120Ka system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster
Management, Construction, Mobile Offices, Emergency Services, Cellular Backhaul and many others.
FMA-120Ka
Technical specifications
1 Skid: 132 cm x 117 cm x 155 cm (52” x 46.1” x 61”) 170 kg (374.8 lbs)
* The shipping weights/dims can vary for particular shipments depending on actual
Electrical system configuration, quantity, packaging materials and special requirements
Elevation Motor 24VDC
Azimuth Motor 24VDC
Rx & Tx Cables 2 RG6 Cables -15m (50 ft) each
Control Cables
Standard 15m (50 ft) Ext. Cable
Optional Up to 60m (200 ft) available
FMA-180
Technical specifications
The iNetVu® 180 Fixed Motorised Antenna system is a self-pointing auto-acquire unit that can be mounted as a permanent installation. Works
seamlessly with the auto-pointing iNetVu® 7024 Controller.
• Features
• 1.8m Offset, prime focus, glass fibre SMC reflector
• Designed to work with the iNetVu® 7024 Controller
• Works seamlessly with the world’s most popular commercially
available satellite modems
• 2 Axis motorization, 3rd Axis (Polarization) optional
• Supports manual control when required
• It is a cost effective so lution for multi-satellite communication
at any location
• One button, auto-pointing controller acquires any Ku or C
band satellite within 2 minutes
• Locates satellites using the most advanced satellite acquisition
methods
• Eliminates costly repointing and network downtime due to
inadvertent motion, satellite change, areas where ground
shifts occur (earthquakes, landslides, mine blast zones, etc...)
• Can be easily relocated when mounted on a semi-permanent
platform without the need for any specialised equipment
• Any compatible fixed installation can be easily converted and
upgraded to a fully motorised system
• Supports Prodelin 1.8m antenna, Model 1184
• System designed for 4W and higher BUCs. 10 kg (Max.) weight
for RF electronics (BUC and LNB)
• 1Year Warranty
Application Versatility
T he FMA-180 system is easily configured to provide instant access to satellite communications for any application that requires reliable and/
or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster Management,
Construction, Mobile Offices and Emergency Services.
FMA-180
Technical specifications
Pallet 1: FMA 1.8m Ku or C band System with 3rd axis motorization on skid
Ku-Band Receive Transmit
157.5 cm x 106.7 cm x 61 cm (62”x42”x24”); 95.3 Kg (210 lbs);
Operating Frequency (GHz) 10.95 - 12.75 (1) 13.75 - 14.50 Pallet 2: FMA 1.8m Reflector on skid
Midband Gain (± .2dB) 45.00 46.50 208.3 cm x 208.3 cm x 35.6 cm (82”x82”x14”); 80.3 Kg (177 lbs);
Antenna Noise Temp. (K) 10º EL= 44 / 40º EL= 33
Sidelobe Envelope Co-Pol (dBi) *The shipping weights/dims can vary for particular shipments depending on actual system
configuration, quantity, packaging materials and special requirements
Mainbeam <Θ<7º 29-25 LogΘ
7º <Θ< 9.2º +8
9.2º <Θ <48º 32-25 LogΘ
48º <Θ <180º -10 Ave.
Cross Polarization > -30 dB on axis
Feed Interface WR 75 WR 75
VSWR 1.3:1 (Max.)
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
FMA-240
Technical specifications
The iNetVu® 240 Fixed Motorised Antenna system is a 2.4m self-pointing auto-acquire unit that can be mounted as a permanent installation. Works
seamlessly with the auto-pointing iNetVu® 7024 Controller.
Features
• 2.4m Offset, 4-piece Prime Focus, Glass Fibre SMC reflector
• Designed to work with the iNetVu® 7024 Controller
• Works seamlessly with the world’s most popular commercially
available satellite modems
• 2 Axis motorization, 3rd Axis (Polarization) optional
• Supports manual control when required
• It is a cost effective solution for multi-satellite communication
at any location
• One button, auto-pointing controller acquires any Ku or C
band satellite within 2 minutes
• Locates satellites using the most advanced satellite acquisition
methods
• Eliminates costly repointing and network downtime due
toinadvertent motion, satellite change, areas where ground
shifts occur (earthquakes, landslides, mine blast zones, etc...)
• Can be easily relocated when mounted on a semi-permanent
platform without the need for any specialised equipment
• Any compatible fixed installation can be easily converted and
upgraded to a fully motorised system
• Supports Prodelin 2.4m antenna, Model 1244
• System designed for light weight BUCs up to 10 kg (Max.)
weight for RF electronics (BUC and LNB)
• 1Year Warranty
Application Versatility
T he FMA-240 system is easily configured to provide instant access to satellite communications for any application that requires reliable and/
or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster Management,
Construction, Mobile Offices and Emergency Services.
FMA-240
Technical specifications
Note:
(1) 0° to 90° option available - contact C-COM
(2) LNB PLL Type required with stability better than ± 25 KHz
Technical specifications
Controllers
& Accessories
7000/7024 Controller
Technical specifications
7000/7024 Controller
Technical specifications
• DVB Search - Searches directly for any DVB-S or DVB-S2 (ACM) carrier on the target satellite and peaks on it.
• DVB Search, Opposite Polarity – Searches for DVB-S or DVB-S2 carrier in the opposite polarity on target satellite, then
rotates polarization axes and enables transmitter if modem signal attained.
• DVB Search, Reference Satellite - Searches for a DVB-S or DVB-S2 carrier on ANY configured reference satellite then
moves to the target satellite and peaks on modem signal.
• RF Automatic Search – The system will stop and search for modem signal when it senses an increase in RF energy
received through the DVB tuner as it passes by the target satellite. If the modem signal is found, the system will begin
the peak process.
• RF Override Search – The user specifies an RF Threshold such that the system stops when it reaches an area above the
threshold and looks for modem signal to peak on.
• Beacon Receiver – The Controller works seamlessly with the optional iNetVu® Beacon Receiver by searching for a
specified beacon frequency and then peaks on it (search gain level can be adjusted).
• Auto-Deploy Method - Peaks on a reference satellite then uses precise pointing mechanism to locate the target satellite,
even when no modem RF or beacon signal is available to peak on.
7710 Controller
Technical specifications
7710 Controller
Technical specifications
7711 Controller
Technical specifications
7711 Controller
Technical specifications
• DVB Search - Searches directly for any DVB-S or DVB-S2 (ACM) carrier on the target satellite and peaks on it.
• DVB Search, Opposite Polarity – Searches for DVB-S or DVB-S2 carrier in the opposite polarity on target satellite, then rotates
polarization axes and enables transmitter if modem signal attained.
• DVB Search, Reference Satellite with modem - Searches for a DVB-S or DVB-S2 carrier on ANY configured reference satellite
then moves to the target satellite and peaks on modem signal.
• DVB Search, Reference Satellite without modem - Peaks on a reference satellite then uses precise pointing mechanism to locate
the target satellite, even when n o modem RF or beacon signal is available to peak on.
• RF Automatic Search – The system will stop and search for modem signal when it senses an increase in RF energy received
through the DVB tuner as it passes by the target satellite. If the modem signal is found, the system will begin the peak process.
• RF Override Search – The user specifies an RF Threshold such that the system stops when it reaches an area above the
threshold and looks for modem signal to peak on.
• Beacon Receiver – The iNetVu® Controller works seamlessly with the optional iNetVu® Beacon Receiver by searching for a
specified beacon frequency and then peaks on it (search gain level can be adjusted).
3000 Controller
Technical specifications
Features Environmental
Beacon Receiver
Technical specifications
The iNetVu® BR300L 19” rack mount Beacon Receiver is a high performance unit designed to track the power density of a satellite beacon
in real time. It supplies a DC voltage output that is linearly proportional to the beacon power by utilizing a true, RMS - responding power
detector.
The BR300L has been specifically designed to work seamlessly with all iNetVu® controllers and antenna platforms.
System Environmental
Input Frequency 930 MHz - 2300 MHz Operating Temperature 0º to +50º C (32º to 122º F)
Pre-detection Bandwidth 50 kHz Storage Temperature -40º to +70º C (-40º to +158º F)
Input Level - 90 dBm (Min.), -30 dBm (Max.) Humidity 95% RH @ 40º C
Frequency Tuning 10 kHz steps
Frequency Adjust Front panel or remotely
Physical
AFC ± 23 kHz
Threshold 45 dB-Hz, for acquisition Size 4.5 cm (1.75”) H; 41 cm (16”) D
Input Impedance 75 Ohm (Optional 50 Ohm)(1) 48 cm (19“) W
Input Connector Type F, Female Weight 3.63 kg (8lbs)
Output Impedance 100 Ohm, Single ended Primary Power 90-264 VAC 47 - 63Hz, 1.4A Autosensing
Output Connector Terminal Plug & BNC Female
Tracking Gradient 0.5 V/dB
Tracking Response 0 to +10 VDC Certification
System Level Range 60 dB Complies with FCC Part 15 Class B
System Level Adjust 0 to 60 dB, 0.5 dB Steps CE & VCCI Approvals for Emission & Immunity Standards
Frequency Stability <1 ppm, 0º to +50º C (32º to 122º F)
Frequency Reference 10 MHz (Internal) Shipping dimensions
Phase Noise >75 dB-Hz, 1 kHz from Carrier Receiver box:
Alarms Unit Lock 56 cm x 51 cm x 13 cm (22” x 20” x 5”), 3.7 kg (8 lbs)
Alarm Relay Form-C
External LNB Power +18VDC, Switched, In/Out, 500ma, (Max.)
Front Panel Display Vacuum Fluorescent
M&C RS-232 or RS-422/485 switched on rear panel
M & C Connector DB-9, Female
Note: (1) For 50 Ohm/N-Type please order BR300L-N (SMA Type is also available)
PowerSmart
Technical specifications
The PowerSmart 2480 has been designed to provide 24 / 48 VDC or 110 / 220 VAC power to external amplifiers / BUCs, and includes features to support
Monitor and Control (M&C) functions for several products. Most DC / AC powered BUCs, SSPAs and TWTAs can be integrated with the PowerSmart 2480,
for an efficient and convenient hardware solution to provide POWER plus M&C control to an outdoor transmitter unit.
Features
• 19 inch 1U rack mount unit
• Amplifier functions such as TX Enable / Disable and operational
status can be monitored and controlled from a convenient
operator control panel. (1)
• The amplifier manufacturer’s software can typically be operated
from a PC platform through the configurable port, over RS232,
RS485 or SNMP interface as required.
• Enabling the Transmit function, monitoring BUC faults and the
presence of 10 MHz reference on the IFL, verifying output power
level and other common functions along with the rack mount
format make the PowerSmart 2480 a value-added solution to
higher-powered VSAT applications.
• Configuration parameters, onboard statistics and fault
information can be accessed via the amplifier’s control interface
(if available) through a convenient data port on the panel.
• Optional support for Bias-T, DC Blocker, MUX-T with 10 MHz
clock, all in one convenient rack mount enclosure.
• Standard 2-Year Warranty
Note:
(1) Listed features are BUC dependent. Some front panel features related to M&C
control may not be supported by some BUC manufacturers. Please inquire for
further clarifications.
Application Versatility
The iNetVu® PowerSmart 2480 is ideal for applications where a VSAT transmitter / amplifier requires more power than a satellite modem can provide
over the TX output. This is typical for larger Block Up Converters (BUC) or Power Amplifiers (SSPA, TWTA etc.) that supply over 8 Watts RF output
power.
PowerSmart
Technical specifications
Environmental
Front Panel Switches
Operational Temperature -20º C to +60º C (-4º F to 140º F) Power ON / OFF
Storage Temperature -40º C to +85º C (-40º F to 185º F) BUC Control (1) Enable / Disable transmitter
Humidity 10 - 95% RH
Compatibility
Physical
Supports most AC / DC Powered BUC in the market
Dimensions W: 48.3 cm (19”)
D: 36.2 cm (14”)
H: 4.5 cm (2”)
Weight 6.3 kg (14 lbs) PC Interface
DB9 on front panel used to access BUC Software via PC
Input
Voltage Range 85 - 264VAC
Frequency Range 47 - 63 Hz
AC Current 6.5A / 115VAC
3.5A / 230VAC
Transportable Cases
Technical specifications
Metallic Option - Aluminum Finish ATA Plastic Option iNetVu® 980 Case:
Major Features
Ideal for Mobile Applications:
• Available in Attractive Black-Coloured ATA Cases
• High-grade Aluminum Extrusion Frames • Military Field Sites, Homeland Security and Police Units
• Durable Plastic and Plywood Laminate Panels • Disaster Recovery Operations
• Water-resistant Flat Surface with Drains • Mobile Medical Units
• Closed Cell Foam Padding • Remote and Temporary Field Offices
• Unique L-Shaped Interlocking Covers • Mining and Forestry Operations
• High-Strength Latches, Corners, and Recessed Handles • News / Media Events
• 1200 Available in plastic or metal • Almost any other store / ship / deploy application
Return to Index
Transportable Cases
Technical specifications
Transportable Skid
Technical specifications
The iNetVu Transportable Skid is a robust transportable base which is designed to support the iNetVu 1200 antenna system. The skid can be
transported using forklifts or hoists making it possible to rapidly deploy the antenna system without the need to mount it on a trailer or a vehicle.
Features
(Shown with the iNetVu 1200 antenna system and shock absorbers)
Note: (1)
The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
The iNetVu Transportable Enclosed Skid is a robust transportable enclosure which is designed to support the iNetVu 1200 antenna system. The
Enclosed Skid can be transported using forklifts or hoists making it possible to rapidly deploy the antenna system without the need to mount it
on a trailer or a vehicle. It also allows for stackability for easier space management & warehousing.
Features
Cables
Technical specifications
The iNetVu® product line offers a wide range of cables to address the needs of its resellers. The iNetVu® standard configuration
includes four types of cables:
External Sensor Cable - 25 conductor cable Modem Cable - RG6 Co-axial cable
F-Type connectors
- 24 AWG
75 ohm
- Metalized AMP 16 Pin to DB26 connector
1 m (3 feet)
- 10m (33 feet)
- Weight: 1.1 kg (2.5 lbs)
Controller Cable - RG6 Co-axial cable
F-Type connectors
External Transmit Cable (TX) - RG6 Co-axial cable 75 ohm
- F-Type connectors 1 m (3 feet)
- 75 ohm
- 10m (33 feet)
- Weight: 0.5 kg (1 lbs)
Note: The external cables are also offered in sets of 15m (50 feet), 30m (100 feet), 45m (150 feet) and 60m (200 feet).
You can also order the TX cable in 50 ohm with a N-Type connector and the RX cable with a 50 ohm and a N-Type connector.
Technical specifications
Vertical Markets
Vertical Markets
• Military
• Cellular Backhaul
• Homeland Security
• Emergency Response
• Disaster Relief
• Mining
• Construction
• Mobile Offices
• Mobile Banking
• Recreation Vehicles
Matrix
Technical specifications
Drive-Away Antennas
Models ð Ka-98 1201
Ka-75V 980 981 1200 1500 1501 1800+
Features ò G | V | H w/pod
Band Ka Ku Ku Ka Ka Ka Ku / X Ku Ku, C-Linear, C-Circular Ku, C-Linear, C-Circular Ku, C-Linear, C-Circular
Deployed Height
1260 1320 1481 1510 1510 1510 1676 1650 1800 1800 2480
(mm)
Stowed Height
300 463 300 300 300 300 488 340 490 490 670
(mm)
Total Weight (kg) 52 65 54 54 54 54 92.5 88 83.2 TBD 155
Max. RF
(BUC/LNB)
11 12 30 11 11 11 22 33 25 25 25
Components
weight (lbs)
Max. RF, BUC 12 x 7.5 x 5.5
Dims 3W Custom 10 x 7.5 x 3.5 w/pod: 3W Custom 4W Custom 1-2W Custom 19.0 x 9.5 x 5.5 12.0 x 15.2 x 5.8 19. x 9.5 x 5.5 19. x 9.5 x 5.5 19.0 x 9.75 x 8
(LxWxH/inches) 10 x 7.5 x 5.5
ViaSat Prodelin Skyware Skyware Skyware Skyware Prodelin Skyware Skyware
Reflector Carbon Fibre Carbon Fibre
75 Ka 1984/1985 98 98 Ka 98 Ka 98 Ka 1132/1134 125 183
Elevation
0 to 90 0 to 65 0 to 90 0 to 90 0 to 90 0 to 90 0 to 78 0 to 90 0 to 75 0 to 90 0 to 80
(degrees)
Polarization Auto or 45 Auto or 45 Auto or 45
N/A 70 90 90 95 90 95 90
(+- degrees) (LHCP/RHCP) (LHCP/RHCP) (LHCP/RHCP)
Frequency Tx Ku: 13.75 -14.50 Ku: 13.75 -14.50 Ku: 13.75 -14.50
Ku:13.75-14.50
28.10 - 30.0 13.75 -14.50 13.75 - 14.50 29.50 - 30.00 28.10 - 30.00 29.50 - 30.00 13.75 -14.50 C- Linear: 5.85 - 6.725 C- Linear: 5.85 - 6.425 C- Linear: 5.85 - 6.725
(GHz) X: 7.90 - 8.40 C- Circular: 5.85 - 6.425 C- Circular: 5.85 - 6.425 C- Circular 5.85 - 6.425
Midband Gain Ku: 43.70, 45.00 Ku: 43.70, 45.00 Ku: 45.30, 46.80
Ku: 41.50, 43.0
41.40, 44.50 39.80, 41.30 39.70, 41.20 43.50, 46.60 43.50, 46.60 43.50, 46.60 41.80, 43.30 C- Linear: 33.40, 37.20 C- Linear: 33.40, 37.20 C- Linear: 35.40, 39.30
(Rx, Tx) X: 37.40 - 38.10 C- Circular: 33.30, 37.10 C- Circular: 33.30, 37.10 C- Circular: 35.40, 39.50
Wind Deployed
160 160 160 160 160 160 112 112 112 112 112
(km/h)
Wind Stowed
225 225 225 225 225 225 225 160 225 225 225
(km/h)
Survival Temp.
-40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65
(°C)
Operational,
72 72 72 72 72 72 72 75 72 72 72
Wind (km/h)
Operational,
-30 to 55 -30 to 55 -30 to 55 -30 to 55 -30 to 55 -30 to 55 -32 to 55 -30 to 55 -30 to 55 -30 to 55 -32 to 55
Temp. (°C)
Controller 7024C 7000C 7024C 7024C 7024C 7024C 7000C 7024C 7000C 7710 7000C
Standard Cables CB-7000-30-
(75 Ohm) CB-7024-10 CB-7024-10 CB-7024-10 CB-7024-10 CB-7024-10 CB-7000-30-MIL CB-7024-10 CB-7000-30-MIL CB-7000-30-MIL CB-7000-30-MIL-18
MIL
10m (33 ft) 10m (33ft) 10m (33 ft) 10m (33 ft) 10m (33 ft) 9.1m (30 ft) 10m (33 ft) 9.1m (30 ft) 9.1m (30 ft) 9.1m (30 ft)
(50 Ohm -Opt.) 9.1m (30 ft)
Optional Cable 10-60m 10-60m 10-60m 10-60m
60m (200 ft) 60m (200 ft) 60m (200 ft) 60m (200 ft) 60m (200 ft) 60m (200 ft) 45m (150 ft)
Lengths (up to) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft)
Warranty 2 years 2 years 2 years 2 years 2 years 2 years 2 years 2 years 2 years 2 years 2 years
Matrix
Technical specifications
Deployed Height(mm) 1325 1660 1660 1580 1580 N/A 1580 N/A N/A N/A N/A
Stowed Height (mm) 290 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Elevation (degrees) 0 to 90 0 to 90 0 to 90 0 to 90 0 to 90 5 to 90 10 to 90 0 to 90 10 to 90 10 to 90 10 to 90
Ku: 13.75-14.50
Ku: 13.75 - 14.50
Frequency Tx (GHz) 28.10 - 30.0 13.75-14.50 29.50 - 30.00 28.10 - 30.00 29.50 - 30.00 13.75 - 14.50 29.50 - 30.00 13.75 - 14.50 14.0 - 14.50 C- Linear: 5.85-6.425
X: 7.90 - 8.40 C- Circular: 5.85-6.425
Ku: 47.40 49.20
Ku: 41.80, 43.30
Midband Gain (Rx, Tx) 41.40, 44.50 39.70, 41.20 43.50, 46.60 43.50, 46.60 43.50, 46.60 41.50, 43.00 46.50, 49.90 41.50, 43.00 45.00, 46.50 C- Linear: 38.20, 42.20
X: 37.20, 37.80 C- Circular: 38.00, 42.00
Wind Deployed (km/h) 100 w/ballast 100 w/ballast 100 w/ballast 100 w/ballast 100 w/ballast 145 145 200 200 200 200
Wind Stowed (km/h) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Survival Temp. (°C) -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65
Operational Wind 50 no ballast 50 no ballast 50 no ballast 50 no ballast 50 no ballast 48 no ballast 50w/ballast 72 72 72 72
(km/h) 72 w/ ballast 72 w/ ballast 72 w/ ballast 72 w/ ballast 72 w/ ballast 72 w/ ballast
Operational, Temp. (°C) -30 to 60 -30 to 60 -30 to 60 -30 to 60 -30 to 60 -30 to 55 -30 to 55 -30 to 60 -30 to 60 -30 to 60 -30 to 60
Controller 7710 7710 7710 7710 7710 7024C 7024C 7024C 7024C 7024C 7024C
Stand. Cables(75 Ohm) CB-FLY-SAT-30 CB-FLY-AC-30 CB-FMA-1200-50-F CB-FMA-1200-50-F CB-FMA-1800-50-F
7.5m (25 ft) 10m (33 ft) 10m (33 ft) 10m (33 ft) 10m (33 ft) 15m (50 ft)
(50 Ohm - Opt.) 10m (33 ft) 10m (33 ft) 15m (50 ft) 15m (50 ft) 15m (50 ft)
Opt. Cable Lengths N/A 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m
(up to) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft)
Warranty 2 years 2 years 2 years 2 years 2 years 2 years 1 year 1 year 1 year 1 year 1 year