Documente Academic
Documente Profesional
Documente Cultură
User’s Manual
Version 1.0
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
Table of Contents
1. Introduction ………………...………………... 3
2. Features ………………...………………... 3
3. Installation ………………...………………... 4
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
1. Introduction
This PTZ camera controller is capable of controlling up to 255 PTZ dome cameras. The
keyboard has 3-D joystick for PTZ control, and dedicated buttons for OSD, Auto Pan and
Patten functions. The multiple-protocols allowing users to integrate our products into
existing systems of the other brands and to extend the system compatibility and
connectivity.
2. Features
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
3. Installation
Terminator:
Video
Monitor
DVR
RS-485
RS-485
Convert
Terminator:
PC Base
RS-485
RS-485
Terminator:
Video
Monitor
DVR
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
1 12 11
4 5 6 7 8 9 10
Function Function
1 LCD Display 7 AUTO-RUN Start / Stop Key
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
1 2 3
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
5.1 Protocol
Select the protocol type of the operation mode.
Support: Pelco D, Pelco P, Lilin, Dynacolor, Hunda and Samsung
5.3 Terminator
In order to prevent the attenuation of communication signals between
controller and camera. When using parallel connection, the first and last
terminator should be turned ON, and the mid one should be turned OFF to
keep best transmission status.
P.S. Highly recommend to set the keyboard as first or last of the connection.
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
5.4 Buzzer
To turns the sound of controller buttons on or off.
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
3 Terminator On – Off On
4 Buzzer On – Off On
To Lock
6 Input Password ( Default 1111) No
keyboard
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
a. Pan-tilt control
Move the joystick up / down for tilting, left /
right for panning. The wider you move the
stick, the faster the camera will go.
b. Zoom in-out
The joystick can be used to control Speed
Dome Camera's zoom in and zoom out
function.
Joystick turn clockwise to zoom in.
Joystick turn counter-clockwise to zoom out.
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
6.9 Preset
Setting Up Preset Location
a. Using the joystick and controller buttons, move Cam 001 Preset 000
the camera to a desired location. Save Preset XXX
b. Enter a preset number.
c. Hold down the preset button for 2 seconds to save the
preset location. LCD will show “Save Preset xxx”
PS. You can select preset numbers from 1 to 255 using the controller. The
maximum preset location number depending on the camera.
6.10 Pattern
Activate Patten
a. Enter a pattern number (1~9).
b. Press pattern button. LCD will show “xxx PATTERN-RUN”
Stop Pattern
a. Press pattern button. LCD will show “PATTERN STOP”
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
Stop auto-run
a. Press auto-run button. LCD will show “AUTO PAN STOP”
P.S. The way to activate auto-run mode may different when you use different
camera or different protocol.
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
7. Specifications
EVA-KB100 www.eurovideo-cctv.com
User’s Manual
When you use Li-Lin or DynaColor system, the F1~F4 button have special function. Please check out the interdiction as
follow:
1. Li-Lin:
F1: Setting Preset Speed
Enter a number from 1~255 then press the F1 button to set the Speed value.
F2: Setting Dwell time
Enter a number from 1~255 then press the F2 button to set the Dwell value.
F3: No function
F4: Setting Preset Group
Enter a number (1~4) then press the F4 button to setting Preset Group.
*To setup all group in one time, enter 5 then press the F4 button.
2. DynaColor :
AUTOPAN LINE Setup:
START POINT
Move the dome to <START POINT> then press the F3 button.
END POINT
Move the dome to <END POINT> then press the F4 button.
SPEED
Enter a number from 1~4 then press the F1 button to set the Speed value. The speed is adjustable from 10 ~
45 degree/sec.
EVA-KB100 www.eurovideo-cctv.com