0 evaluări0% au considerat acest document util (0 voturi)
398 vizualizări1 pagină
This document provides torque specifications for fasteners on the steering column and steering gear of a Volkswagen Passat B6 2005. It lists the specific threaded fasteners, their thread size and type, and the required torque in Nm to correctly tighten each one. Proper tightening of fasteners is important for safety and performance of the steering system. Replacement is specified for some fasteners that are removed.
This document provides torque specifications for fasteners on the steering column and steering gear of a Volkswagen Passat B6 2005. It lists the specific threaded fasteners, their thread size and type, and the required torque in Nm to correctly tighten each one. Proper tightening of fasteners is important for safety and performance of the steering system. Replacement is specified for some fasteners that are removed.
This document provides torque specifications for fasteners on the steering column and steering gear of a Volkswagen Passat B6 2005. It lists the specific threaded fasteners, their thread size and type, and the required torque in Nm to correctly tighten each one. Proper tightening of fasteners is important for safety and performance of the steering system. Replacement is specified for some fasteners that are removed.
To mounting bracket M8 x 30 20 Item - 4 - Mounting bracket to body M8 x 30 20 Item - 1 - M8 x 85 Frequency damper to mounting bracket M8 x 94 20 Item - 10 - Frequency damper to body M8 x 48 20 Item - 11 - Universal joint to steering gear M8 x 35 20 plus an additional 90 1) Item - 8 - To handle M6 x 10 3 Item - 7 - To steering wheel M18 x 1.5 x 18 50
To subframe 1) M10 x 70 50 plus an additional 90 Item - 8 - To shield M6, self- 6 Item - 10 - locking Tie rod ball joint to wheel Pretighten to 100 Nm, then loosen by 180 and bearing housing M12 x 1.5 Item - 6 - tighten to 100 Nm again 1)