Documente Academic
Documente Profesional
Documente Cultură
PRODUCT BENEFITS
High Gloss Finish Stain Gaurd SOLVENT BASED
Apcolite Advanced Hi-Gloss Enamel gives superior Apcolite Advanced Hi-Gloss Enamel is a highly washable
mirror like gloss for your doors, windows, grills & paint, thus you can wipe off most common household
gates stains easily
Non-Yellowing
Apcolite Advanced Hi-Gloss Enamel offers superior non-
yellowing performance which ensures the shades stay
* All Asian Paints products contain no added
Lead, Mercury, Arsenic or Chromium
from April 2008.
the same for a longer time, without yellowing
PRODUCT FEATURES
WASHABILITY COLOURS AVAILABLE COVERAGE
BEST IN CLASS
HIGH
953* On smooth masonry surface by brushing
MEDIUM
1 COAT
LOW
*Currently available in 953
180 - 200
shades as per the Colourworld Fandeck
sq. ft / ltr**
AVAILABLE PACKS FINISH
2 COATS
MATT LOW SHEEN HIGH SHEEN HIGH GLOSS 90 - 100
sq. ft / ltr**
SILKY SMOOTH
500 ml 1 ltr 4 ltr 10 ltr 20 ltr
Shelf life: 3 years from date of manufacture, in original tightly Refer to sheen levels in technical details **Actual coverage may vary from the quoted coverage due
closed containers away from direct sunlight and excessive to factors such as method and condition of application and
heat. surface roughness and porosity.
HOW TO APPLY
PRE PAINTING STEPS PAINT APPLICATION PROCESS
PLASTER New masonry surfaces APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
VISCOSITY1 PERIOD
must be allowed to cure
completely. It is recommended to STEP 1
SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
allow 28 days as the curing time
for new masonry surfaces.
STEP 2
CLEANING Surface should be METAL PRIMER (METAL) / 0005
BRUSH 4 - 10 BRUSH 30 - 40
DECOPRIME ST (MASONRY) / 0359 MTO* 6 - 8 HRS
free from any loose paint, dust or 0007
SPRAY 12 - 15 SPRAY 20 - 25
WOOD PRIMER (WOOD)
grease. Growths of fungus, algae
or moss should be removed by STEP 3
KNIFING PASTE FILLER 0016 MTO 6 - 8 HRS
wire brushing and water. In case of BASED ON BASED ON
(METAL / WOOD) OR
areas having excessive dampness WALL PUTTY (MASONRY) 1354 WATER
REQUIREMENT REQUIREMENT
4 - 6 HRS
use Asian Paints DampBlock to PUTTY KNIFE
limit further dampness. When STEP 4
the underlying surface exhibits SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
chalkiness, in spite of thorough STEP 5
surface cleaning, use Asian Paints METAL PRIMER (METAL) / 0005
BRUSH 5 - 10 BRUSH 30 - 40
SmartCare Exterior Sealer. DECOPRIME ST (MASONORY) / 0359 MTO* 6 - 8 HRS
SPRAY 10 - 15 SPRAY 20 - 25
WOOD PRIMER (WOOD) 0007
FILLING FOR CRACKS For filling
masonry upto 3mm use Asian STEP 6
Paints SmartCare Crack Seal. SANDING SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN
COLOUR SPECTRA FAN DECK* APCOLITE ADVANCED HI-GLOSS ENAMEL SHADE CARD
*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference
ADDITIONAL INFORMATION
For the best performance of the paint, ensure > Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
proper washing and cleaning of all algal and this level within 4 hrs of application.
fungal growth, if any, at regular intervals of > Do not over-thin or over-extend the brush.
six months. > Tint using Asian Paints machine colourants only
> Stir well and strain before use.
> Tinted paints need thorough shaking immediately after tinter addition as well as before use.
TECHNICAL DETAILS
Version No. VN01/05/2015. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India