Documente Academic
Documente Profesional
Documente Cultură
Introduction
Required tool
Scissors, ruler, cutting knife, glue.
Material
2
A4 Paper (0.215mm=180g /m)
Wooden stick (4mm in diameter, About 2m in full length )
String 2~4m in length
Directions of diagram
Cutting line
Folding outside
Folding inside
Cautions
Take great care, when you treat an edged tool.
5 1
12 Remove
ref.01 9
8
3
4
ref.01 is reference. In practice, assemble A-05. 7
11
2 6
A-02
A-07
A-03
Make a pillar using A-02 x2 and A-03. A-06
Glue Glue to the back side of A-05.
A-02
Push in a pillar perpendicularly. Two kinds of Type-A is completed.
eyelet
Copyright (C) 2008 Glue 2 Chronicle.All Rights Reserved.
15teeth, 20teeth, 40teeth and 45teeth Gear
6 Since it is the same as 12teeth Type-A, how to make 15teeth Gear is omitted.
Make 15teeth Gear for 12teeth Type-A to reference.
8 How to make 40teeth Gear.
Parts number are D-01 ~ D-06.
Parts number are B-01 ~ B-07.
It is the same method of structure as 20teeth Gear.
How to make 20teeth Gear.
7 Parts number are C-01 ~ C-06.
C-04
C-02
C-06
Glue
C-05
There are two points different from 20,40teeth.
There is no axle hole in inside. 2
Glue C-06 to C-05 in order of a diagonal. Structure of the side.
Glue C-01 together. E-05'
Eyelet does not use with 20 teeth Gear. 3
Glue C-05 to C-04.
E-06 1
Use C-01 as a pattern then. Glue
eyelet
Glue
H-04
F-07
F-08
H-09
L-09
Glue H-08.
L-05
Glue H-09 to both sides.
Copyright (C) 2008 Glue 2 Chronicle.All Rights Reserved.
Escapement and Ratchet
17 How to make Escapement.
Parts number are J-01 ~ J-07.
19 Glue
20 Paper spring
K-04
K-03
J-02' K-06 2
eyelet K-15
60teeth type-B K-14 K-07 K-13
K-01 Glue
L-08
L-11 N-09
Glue
N-04 N-07
N-11
I recommend using eyelet for L-10 and L-11.
N-09
N-02 N-10
N-01 N-11
N-05
N-08 N-06
Glue
M-06
M-05 M-01
It only inserts.
No Glue.
M-04 M-07
N-09
Glue
Q-11
N-18 Glue Be careful not to close a slit.
N-15 N-12
to slit
Q-16
N-16
Named "block-32"
N-13 Q-16
Q-12 to slit
N-07
Glue
Be careful not to close a slit.
N-13
Frame A-01 34 Q-07
Q-08
O-09 O-10
O-06 O-13
Glue
O-03
O-13 Q-06
O-02 O-03 O-07
O-05 O-02 O-11
35 block33
O-01 Q-09
O-08
O-01 Q-14
block32
Q-09
Q-10
Q-14
block34 Q-05
Q-04
Q-03
Q-14 Q-01
Q-02
Q-13
Frame A-02 Q-13 Q-01 Q-10
block34
Q-14
Copyright (C) 2008 Glue 2 Chronicle.All Rights Reserved.
Assemble Frame A
36 How to assemble A-01 and A-04.
Cut a stick using ruler X-03.
37
Glue and twist Y-01 around a stick.
Frame A-03
P-01
Y-01
Glue
48teeth Type-A
Fix completely so that an axis and the gear do not slide.
"B" "A"
Y-01
Y-01 Frame A-02
1
Frame A-03
P-01
Copyright (C) 2008 Glue 2 Chronicle.All Rights Reserved.
Assemble Frame B
How to assemble Frame B
39
R-13
3 R-12 R-05 and R-06
1
R-13
2
S-01
R-12
S-01
R-11
4 R-08
R-04
R-08
S-01
S-01 R-03
R-10
R-07
R-02
R-04
R-02
S-01
S-01 R-07
1. Cut a stick using ruler X-01. R-09
Glue and twist Y-01 around a stick.
Glue 60teeth Gear Type-A to side of Y-01.
Let an axis pass to the hole of a Frame.
Glue
W-04 2
W-01
T-12
T-08 U-01
T-12
T-10
T-07 1
T-10
U-01
T-03
T-08
T-03
T-08
T-04
T-11 4. Glue Frame C.
T-04
T-01 U-01
T-08
T-01
Copyright (C) 2008 Glue 2 Chronicle.All Rights Reserved.
Assemble Frame D
41
V-08 V-07
V-02
V-01
V-02
V-03
Glue an end in this position.
V-01
2
V-04
3
V-05
1
V-04
I send the greatest eulogy and gratitude to you who completed the paper pendulum clock.
Thank you.
atom