Documente Academic
Documente Profesional
Documente Cultură
!
NOTE! Before use, remove
magnetism protection plate from use of the Easy-Laser® BTA. as 0.44mm [17.6 thou] at a distance
A B between the targets of 100mm [4”].
the magnetic area.
TECHNICAL SPECIFICATIONS safety precautions 1. Placing the units 4. horizontal alignment Feature
Laser Transmitter: Warning! If starting the machine that The laser shall be placed at the Station- Place the targets horizontally according Attach to non magnetic sheaves.
Sheave diameters: > B60mm [B2.5”] will be measured can result in personal ary (S) machine and the targets at the to the picture, and adjust the movable Because of the light weight of the tool and
Beam angle: 60° injuries, the possibility to unintentially Movable (M). machine until the beam hits in the center the targets you can also mount the units
Measurement distance: 10m [33 feet] start it shall be disabled before mounting of the both targets. onto non magnetic sheaves by attaching
Battery type: R6 (AA) 1.5V the measurement equipment, for example pieces of double sided adhesive tape to
Battery operation: 8 hours cont. by locking the switch in off position or M S the magnetical surface. Be sure that both
Laser class: 2 remove the fuses. These safety precau- the surface and the sheaves are cleaned
Output power: < 1 mW tions should remain until the measure- from grease and oil before attaching.
Laser wavelength: 635–670 nm ment equipment are removed from the
Temperature range: -10 – +50 °C machine. NOTE!
[14 – 122 °F] 2. different sheave face width The product is designed to be used on
Housing material: ABS plastics CARE If necessary, adjust the targets for possi- sheaves/pulleys. Both of the magnetic
Backplate: Hard anodized aluminum Clean the tool and the window at the ble difference in sheave face width before reference surfaces must be in contact
Dimensions WxHxD: 145x86x30mm aperture with a dry cotton cloth. If not alignment. Each mark corresponds to 1 with the object.
[5.8”x3.4”x1.1”] using the laser for a long period of time, mm [40 thou]. Targets placed for Horizontal alignment.
Weight: 270g [8.6oz] remove the battery.