Documente Academic
Documente Profesional
Documente Cultură
MRJN-1020/1025 4- Legged 48.30 5393.87 637.71 5.00 10.20 190.99 571.89 275.33 280.43 331.41 575.13 526.18 673.02 648.55
MRJN-1020/1025 4- Legged 48.30 5393.87 637.71 5.00 10.20 153.27 527.78 275.33 280.43 331.41 575.13 526.18 673.02 648.55
Notes:-
1 The Base shear Reported above are the results of environmental ( Wave, Current and Wind ) only
2 The total gravity load on the platform included dead load, floor load, maximum live load and marine growth including contingencies.
MRJN-1020/1025 Platform Ultimate Pile Head Loads. (With Crane Moments (Mx,My Modified)
MRJN-1020/1025 4- Legged 48.30 21.66 21.59 9.01 8.46 24.66 26.72 15.67 12.89 24.75 24.91 11.19 13.33 28.77 28.55 17.61 17.24
MRJN-1020/1025 4- Legged 48.30 NA NA NA NA NA 0.47 4.63 1.90 NA NA 2.19 0.27 0.13 0.22 6.89 10.28
MRJN-1020/1025 4- Legged 0.00 21.04 20.69 7.95 8.09 24.66 26.72 15.67 12.89 24.75 24.91 11.19 13.33 28.77 28.55 17.61 17.24
MRJN-1020/1025 4- Legged 0.00 NA NA NA NA NA 0.47 4.63 1.90 NA NA 2.19 0.27 0.13 0.22 6.89 10.28
Geotechnical report reference:
(i) K-NPC-SAU-0033- (Rev 0)- Preliminary Engineering Report for MRJN 1020/1025
Notes
Compression: (i) Pile Ultimate load for operating storm condition = [ pile head load + submerged weight of pile +weight of soil plug] X2.0
(ii) Pile Ultimate load for extreme storm condition = [ pile head load + submerged weight of pile +weight of soil plug] X1.50
(iii) Pile loads are ultimate loads (with a factor of safety of 2.0 for Operating and 1.5 for Storm) and include 5% contingency.
Tension: (i) Pile Ultimate load for operating storm condition = [ pile head load - submerged weight of pile ] X 2.0
(ii) Pile Ultimate load for extreme storm condition = [ pile head load - submerged weight of pile] X 1.50
(iii) Pile loads are ultimate loads (with a factor of safety of 2.0 for Operating and 1.5 for Storm) and include 5% contingency.
42" x 1.75"
MRJN-1020/1025 4- Legged 48.30 80.00 80.00 55.00 55.00
A1, B1, A2 & B2
Notes:
(i) All piles are governed by compression loads
(ii) Minimum Pile Penetration required for lateral stability is 16.2m (Where Lateral Displacement & Rotation =0)
This is for guidance only and to be recalculated based on the actual soil capacity achieved during installation in case of refusal.