Documente Academic
Documente Profesional
Documente Cultură
sculptable flowable
Natural-looking esthetics –
efficient placement
With Tetric EvoFlow® Bulk Fill and Tetric EvoCeram® Bulk Fill, unique posterior
restorations can be created. These materials are based on the chemistry of the
time-tested universal composite Tetric EvoCeram with 10 years of documented
clinical success 1.
1
Ivoclar Vivadent AG, Scientific Report, 10 Years Tetric Evolution, 2014; Vol. 01
Increments
of up to
4 mm
m ent
Volume replace
10 seconds
s compared to
Time savings a
al technique*
the convention
47%
Single-
layer technique
Two-
layer technique
1 Tetric EvoCeram® Bulk Fill
2
Tetric EvoCeram® Bulk Fill
Leading TE
NTED
®
erin
PA
through innovation ILvo
c
TOR
IA
IG T
H T INI
Effect of standard
2
initiators & Ivocerin
Bucuta S, Ilie N. Light transmittance and micro-mechanical properties of
bulk fill vs. conventional resin based composites. Clin Oral Investig 2014;
2 mm
Effect of Ivocerin
18:1991-2000
4 mm
3
Alrahlah A, Silikas N, Watts D C. Post-cure depth of cure of bulk fill dental
resin-composites. Dent Mater 2014; 30:149-154
4
Heintze S. Sicheres Aushärten des Komposits auch bei fehlerhafter
Polymerisation. DZW 2013; 44:14; also see: Research and Development
Report, Ivoclar Vivadent AG, Ivocerin® – a milestone in composite
technology., No.19, 2013
Starting situation: old, fractured composite filling Final situation: Tooth shape and esthetics have
in tooth 16 and mesial caries. been successfully recreated.
With the bulk-fill composite Tetric EvoCeram Bulk Fill I can effectively restore Prof. Dr Jürgen Manhart
even large posterior cavities while obtaining maximum quality. At the moment, it
can be assumed that Tetric EvoCeram Bulk Fill will show a low annual failure rate Polyclinic for Conservative Dentistry and Periodontology,
similar to that of other proven micro- and nanohybrid composites Munich, Germany
(e.g. Tetric EvoCeram).
Making all the difference:
Aessencio technology
28% <10%
shades IVA, IVB and IVW.
Tetric EvoFlow Bulk Fill Tetric EvoFlow Bulk Fill Final result with
before polymerization after polymerization Tetric EvoCeram Bulk Fill
Tetric EvoFlow Bulk Fill is the perfect complement to the universal composite Dr Eduardo Mahn
Tetric EvoCeram and the bulk-fill composite Tetric EvoCeram Bulk Fill. They offer
me the advantage of a fast procedure, without any trade-offs. The reduction in Director of Clinical Research, Universidad de los
translucency that occurs during the polymerization step (Aessencio technology) Andes, Santiago, Chile
and the light initiator Ivocerin are among the most important innovations
we have seen in recent years.
Reduced
shrinkage strain
due to the shrinkage stress reliever
Schrumpfungss
Two types of shrinkage affect the quality of a restora- Relaxator
Schrumpfungsstress-
Shrinkage stress reliever
ElasticE-Modul 10 GPa
Relaxator
tion: volumentric shrinkage and shrinkage stress. E-Modul 10 Schrumpfungsstress-
modulus
GPa 10 GPa
Relaxator
These forces cause materials to pull away from the
Glasfüller E-Modul 10 GPa
cavity walls during polymerization. Glasfüller
E.Modul 71 GPa
Glass fillerGlasfüller
E.Modul 71 GPa
Monomer-KetteE.Modul
Elastic modulus 7171GPa
GPa
The filler composition of Tetric EvoCeram Bulk Fill Monomer-Kette
Kraft
and Tetric EvoFlow Bulk Fill includes a special,
additional composite filler which relieves shrinkage
Monomer-Kette
Monomer Kraft
chain
0.8-mm Layer 2
0.8-mm Layer 2
0.8-mm Layer 2
0.8
4-mm Layer
4-mm Layer
4-mm Layer
2-mm Layer
2-mm Layer
2-mm Layer
0.6
0.4
Measurement acc. to Watts in 2-mm and 4-mm layers
0.2
using a Bioman shrinkage stress measuring device,
R&D Report, Ivoclar Vivadent AG / 0.0
Tetric Venus Bulk Filtek X-Flow / Tetric x-tra fil1/ SonicFill1/ Filtek Estelite Herculite
1
AADR 2012 Abstract 858 EvoFlow Fill / Heraeus Supreme XTE Dentsply Voco Kerr Supreme Sigma XRV Ultra1/
EvoCeram
Due to the flowable consistency of flowable
2
Bulk Fill Kulzer Flowable / XTE1/ 3M Quick / Kerr
Bulk Fill1
composites, only 0.8-mm layers can be measured. 3M Espe Espe Tokuyama
Long
working time
due to the light sensitivity filter
The composite contains a patented light sensitivity filter that ensures a longer
working time under operatory and ambient light conditions.
This light sensitivity filter acts as a shield, delaying the effects of ambient light.
However, dental curing lights are able to penetrate this shield. As a result, the
composite offers the unique combination of a fast curing time with extended
working time.
250
200
200
170 160
150
120
110 110
100
60 60
50
Measurement acc. to ISO 4049 (8,000 lux),
0 R&D Ivoclar Vivadent AG, December 2014
Tetric SDR / Filtek Bulk x-tra base / Tetric QuiXfil / Filtek Bulk x-tra fil / SonicFill /
EvoFlow Bulk Dentsply Fill Flowable Voco EvoCeram Dentsply Fill Posterior Voco Kerr
Fill Composite / Bulk Fill Restorative /
3M Espe 3M Espe
Viscosity
matched to your needs
Dentists working with Tetric EvoCeram Bulk Fill appreciate the material’s excellent
handling properties. It does not stick to the instrument, remains stable while you
are working and easily adapts to cavity walls. The viscosity controller is responsible
for this behaviour. Moreover, this posterior composite has a pronounced
chameleon effect 5.
The level of flowability and viscosity of Tetric EvoFlow Bulk Fill was established
with the help of clinicians, adjusting it to their needs in the placement of bulk-fill
bases. The result is excellent surface affinity and unique self-levelling handling.
Ideally, the perfectly matched Tetric EvoCeram Bulk Fill is used as capping
material for Tetric EvoFlow Bulk Fill.
5
Peschke A. Ein neues Bulk-Fill-Material in der klinischen Anwendung. DZW 2013; 45:10-11
6
Heintze S. Sicheres Aushärten des Komposits auch bei fehlerhafter Polymerisation. DZW 2013; 44:14; also see: Research
and Development Report, Ivoclar Vivadent AG, Ivocerin® – a milestone in composite technology., No.19, 2013
Preoperative situation: Fracture of the lingual wall At the recall examination after one year
of tooth 36, cracked buccal cusp
I believe that Tetric EvoCeram Bulk Fill is a very good composite Dr Markus Lenhard
material with excellent handling properties. Furthermore, it simplifies
and expedites the layering procedure. You can almost say that, once Dentist with private practice
you have worked with Tetric EvoCeram Bulk Fill, you no longer in Neunkirch, Switzerland
want to work with conventional composites.
Delivery forms
at a glance
Dentin-like shades
IV
A (universal A shade) 646472WW* 646473WW
IV
B (universal B shade) <10%
667724WW* 667725WW
IV
W (white shade for deciduous teeth 667727WW* 667711WW
and light permanent teeth)
Enamel-like shades
IV
A (universal A shade) 638244WW 638241WW 649792WW 638227WW 649793WW
IV
B (universal B shade) 15%
638245WW 638242WW 638228WW
IV
W (white shade for deciduous teeth 638246WW 638243WW 638229WW
and light permanent teeth)
Accessories
Shade guide 667472
Tetric EvoCeram® Bulk Fill and Tetric EvoFlow® Bulk Fill form a part of the “Direct Restoratives” product category. The
products of this category cover the procedure involved in the direct restoration of teeth – from preparation to restoration
care. The products are optimally coordinated with each other and enable successful processing and application.
Adhese Universal ®
OptraGate ®
Universal adhesion with advanced delivery The gentle solution for a better view
• Efficient Delivery – up to 190 single-tooth applications per VivaPen® • Considerably enlarged access to the treatment field
• Universal Application – for all bonding and etching techniques • Enhanced patient comfort due to three-dimensional flexibility
• Predictable Results – high bond strength on dentin and enamel • Wide range of indications
Would you like to know more about the products of the “Direct Restoratives” category? Simply get in touch
with your contact person at Ivoclar Vivadent or visit www.ivoclarvivadent.com for more information.
Ivoclar Vivadent AG
Bendererstr. 2
9494 Schaan
Liechtenstein
Tel. +423 / 235 35 35
Fax +423 / 235 33 60
www.ivoclarvivadent.com 656141/en/2015-02-12