Documente Academic
Documente Profesional
Documente Cultură
GATES
http://www.injectionplasticmold.com/wp-content/uploads/2009/01/cross_sectional_runner_p1_6.gif
Trapezoidal:
+ve. Easy to machine
-ve. Increased surface friction
Round:
+ve. Reduced surface friction
Increased volume
-ve. Difficult to machine into both sides
of the mould
Gate:
The narrow and shallow portion of the
runner as it enters the cavity.
It is important that gates be located
where they are easily trimmed and not
easily seen on the finished product.
http://2.bp.blogspot.com/_oF_1Qcfku_w/SAjITuV5_AI/AAAAAAAAAeQ/VzC1438MwW8/s400/faN%2BGA
T3%2Bcopy.jpg
Ring gate:
http://www.injectionplasticmold.com/wp-content/uploads/2008/12/internal_ring_gate6.gif
Disc gate:
simultaneously.
Direct gate:
http://www.rtpcompany.com/info/molding/design/graphics/tunnelgate.gif
Overflow well