Documente Academic
Documente Profesional
Documente Cultură
## Use '#' to comment out lines, remove the comment to enable an option
## Double ## have been used for explanations of each section/paramter
## Single # have been used to comment out optional paramters/tests
## Note that only 14 lines of tests can be displayed on the main window
## due to console size limits
## Logging
## Comment out the section to turn logging off
<Logging>
## Log prefix
LogPrefix BiTLog2
## Format - Ascii|HTML|Certificate
Format Ascii
## Logging detail level - summary|normal
LogDetailLevel normal
## Trace level - None (0) | Activity Trace 1 (1)| Activity Trace 2 (2)
TraceLevel 0
##maximum number of lines for file
MaxFileLines 1000
## Logging mode - single file or multiples with timestamp
## - ClearAppend Clear results & append (single file)
## - AccumulateAppend Clear results & append (single file)
## - ClearNew Clear results and overwrite existing (single file)
## - Timestamp Create new timestamped files (multiple files)
LogMode ClearAppend
</Logging>
##Auto stop action when tests have passed Stop, RunApp, Reboot
#AutoStopPassed Stop
##Manual stop action when tests have passed Stop, RunApp
#ManualStopPassed Stop
##If using AutoStopPassed RunApp this is the path of the file or script to launch
before exiting
#ExternalPathPassed /path/to/file
##If using AutoStopPassed RunApp this is the paramters to pass to the application
being launched
#ExternalParmasPassed paramters
#UseSystemBeepPassed
#DisplayResultsPassed
##Auto stop action when tests have failed Stop, RunApp, Reboot
#AutoStopFailed Stop
##Manual stop action when tests have failed Stop, RunApp
#ManualStopFailed Stop
##If using AutoStopPassed RunApp this is the path of the file or script to launch
before exiting
#ExternalPathFailed /path/to/file
##If using AutoStopPassed RunApp this is the paramters to pass to the application
being launched
#ExternalParmasFailed paramters
#UseSystemBeepFailed
#DisplayResultsFailed
#</PostTest>
#<Notes>
## CustomerName
#CustomerName Name
## TechnicianName
#TechnicianName Name
## MachineType - One line description of the machine type
#MachineType Type
## MachineSerial - Custom serial for this machine
#MachineSerial Serial1234
## MachineID - Management console machine ID. Needs to be a minimum of 8
characters, maximum of 15
#MachineID Test1234
## Notes - Ones line description of extra notes
#Notes One line of notes
#</Notes>
## Duty cycles
<DutyCycles>
## Auto stop after XXX minutes
AutoStopMinutes 15
## Auto stop after XXX cycles
AutoStopCycles 0
## Duty cycle load for each test, 1-100
CPU 100
CDDVD 100
Memory 100
Serial 100
Parallel 100
Disk 100
Network 100
USB 100
Sound 100
PCIE 100
</DutyCycles>
## Memory section
<Memory>
#Test pattern - Cycle, Sequence, Binary1, Binary2, Zeros, Ones
Cycle
</Memory>
##When using Test all - Cyclic, Sequential, HighLow, Binary1, Binary2, Zeros, Ones,
Random, RandomSeeking
#TestMode Cyclic
##CPU-Math
##Comment out the matching test name if you don't want the tests run
<CPU>
##General Operations Test
General
##Floating Point Unit test
FPU
##Extension instructions - SSE
SSE
##Extension instructions - SSE2
SSE2
##Prime Number Test
Prime
</CPU>
## Network
<Network>
#<Test>
## Device to test
#Device /dev/hdc
## Test mode - Music CD playback (Music), Data CD Read and Verify (Data), PassMark
Test CD/DVD (Passmark), No CD (No)
#TestMode Passmark
## Additional seek - uncomment and edit the seek value if necessary, only valid for
PassMark Test CD/DVD 0-1000
#Seek 100
#</Test>
## Device to test
#Device /dev/hdd
## Test mode - Music CD playback (Music), Data CD Read and Verify (Data),
PassMark## Test CD/DVD (Passmark), No CD (No)
#TestMode Music
## Additional seek - uncomment and edit the seek value if necessary, only valid for
PassMark Test CD/DVD 0-1000
#Seek 100
#</Test>
#</CDRWDVD>
#<Test>
## Device to test - ttys0, ttys1 etc to ttys63
#Device ttys0
## Test Mode - Loopback or Detect
#TestMode Loopback
#</Test>
#<Test>
## Device to test - ttys0, ttys1 etc to ttys63
#Device ttys1
## Test Mode - Loopback or Detect
#TestMode Detect
#</Test>
## Sound section
#<Sound>
## Maximum distortion allowed before and error is logged, allowed values 1-20
#MaxDistortion 5
## Sound device name to test - plughw, default or other sound alias, should be left
as plughw in most cases
#SoundDevName plughw
#</Sound>
##Plugin tests
##Uncomment 'RunSeparately' and 'IgnoreTimeout' when required and have <Test>
section for each plugin to run (up to 5 )
#<Plugin>
##Run each plugin separately (default will run at the same time)
#RunSeparately
#<Test>
## Enter the path of the plugin application to run here
#Path /path/to/plugin
## Uncomment 'PreTest' to run as a pre test plugin
#PreTest
#</Test>
#</Plugin>
#<PCIE>
## Automatically select all PCIE slots with PassMark PCIe cards
#TestAllPCIE
##Number of PCIe slots to test
#NumPCIE 1
#</PCIE>
## Errors
<Errors>
## Action to take on error - Continue (Continue), Beep and continue (Beep), Stop
tests (Stop)
ActionOnError Continue
</Errors>
## Management Console
#<Management>
##Management console server address eg
http://localhost/htdocs/mgtconsolemsghandler.php
#Server http://192.168.2.2/bitconsole/mgtconsolemsghandler.php
## HTTP authentication username
#Username user
## HTTP authentication password
#Password passwd
#</Management>