Errors while using Multi linear stress strain curve for concrete in time history
analysis in ANSYS APDL. Any Suggestions?
Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.Errors while using Multi linear stress strain curve for concrete in time history analysis in ANSYS APDL. Any Suggestions? Its a 15 storey RCC building. Beam188 is used to mesh beam/column and shell181 to mesh slabs. The time history analysis of the same with simple linear properties of concrete (linear elastic) gave convincing results. The errors are *** ERROR *** CP = 2.714 TIME= 17:36:31 TB,MELA plasticity option is not currently supported by element type 188 (element 1 and material 1). *** ERROR *** CP = 2.933 TIME= 17:37:44 TB,MELA plasticity option is not currently supported by element type 181 (element 256 and material 1). For nonlinear concrete (multi linear) i have provided the stress stain curve and modulus of elasticity at the initial point on the curve. Need to solve the problem urgently for thesis. Thank you.
Yarn Manufacturing 1 2012 December Engineering Textile Technology BE Bachelor of Engineering Semester 3 University Exam Gujarat Technological University