Documente Academic
Documente Profesional
Documente Cultură
New editions of this manual incorporate all material updated since the
previous edition. The manual printing date, which indicates the man-
ual’s current edition, changes when a new edition is printed. Minor
corrections and updates that are incorporated at reprint do not cause
the date to change.
Update packages may be issued between editions and contain addi-
tional and/or replacement pages to be merged into the manual by the
user. Pages that are rearranged due to changes on a previous page are
not considered to be revised.
Edition Da te Software
Ve rs io n
1 May 2003 9
2 June 2005 10
3 June 2007 11
4 Sept 2009 12
5 October 2010 13.0
6 August 2011 14.0
7 November 2012 15.0
Table of Contents
Contents-1
ANSYS Electromagnetics Windows Installation Guide
Contents-2
1
Getting Started
Installation Prerequisites
Before installing ANSYS Electromagnetics software, you need the following:
• The ANSYS Electromagnetics product CD or product download (see “Addi-
tional Resources” on page 1-5 for download information).
• A license file based on the ansoftd vendor daemon.
• The FLEXlm for Ansoft CD for counted evaluation and purchased licenses.
(you may also download FLEXlm for Ansoft--see “Additional Resources”
on page 1-5)
• A computer with TCP/IP installed, for counted evaluation and purchased
licenses.
• A computer that meets the minimum or recommended system requirements,
which depends on the specific ANSYS Electromagnetics products you plan
to run (see product release notes for specifications).
ANSYS Electromagnetics Software
The ANSYS Electromagnetics product CD or equivalent download contains:
• The ANSYS Electromagnetics software product(s) and project examples.
• Third-party software, when necessary, for viewing online documentation (for
example, HTML Help or Adobe Acrobat Reader).
• Documentation files.
• Hardware key drivers. (You can choose to install them when you install FLEXlm
for Ansoft or any ANSYS Electromagnetics software product.)
The FLEXlm for Ansoft CD or equivalent download contains:
License Server
Once you have purchased the software, you must designate a machine on your net-
work to act as a license server. The FLEXlm for Ansoft license server must be
installed in one of the following two locations:
• On the computer where the software will be installed.
• On another machine accessible over the network.
Note You can install the FLEXlm for Ansoft license server before or after you
install the ANSYS Electromagnetics software.
See Chapter 5, “Installing the License Server,” for FLEXlm for Ansoft installation
instructions and additional licensing information.
TCP/IP
Transmission Control Protocol/Internet Protocol (TCP/IP) is required for any
ANSYS Electromagnetics software that uses the FLEXlm for Ansoft license server
— even for a single computer in stand-alone mode.
• TCP/IP must be installed on the machine that is running FLEXlm for Ansoft (the
server) and on each machine that obtains licenses from that server.
• By default, TCP/IP is usually already installed on a computer running a Windows
platform.
• TCP/IP is usually bound to a network card. If a network card is already installed
and set up for TCP/IP, no additional action is needed during installation.
• If a network card is not installed, then you can satisfy the TCP/IP requirement by
installing the Microsoft Loopback Adapter (MLA). The MLA is a software mod-
ule that emulates a network card. For more details, see the appropriate help topics
in Microsoft Windows (on the Windows taskbar, click Start>Help or
Start>Help and Support, depending on the operating system).
OpenGL
All ANSYS Electromagnetics software (excluding FLEXlm for Ansoft) requires that
the OpenGL libraries be accessible from the machine running ANSYS Electromag-
netics software. Most graphics card drivers automatically come with OpenGL soft-
ware for Windows.
Graphics Card and Performance
Note For some graphics cards, there may be slowdown for Field animations ,
Rotating and zooming for complex models, and selection display. This
includes
NVidia Quadro 2000M
NVidia Quadro FX 3800M
NVidia Quadro 4000
NVidia Quadro FX 1800
The problem does not show on the following graphic adapters:
ATI FirePro V5800
Quadro NVS 295
Quadro NVS 290
To correct the problem, set the NVIDIA Control Panel>3D
Settings>Manage 3D Settings>Global Settings>Global Presets:
Workstation App - Dynamic Streaming
Firewall Exceptions
Firewall exceptions are needed for the COM engines and ANSYS Electromagnetics
products if solving remotely (something that does not necessarily require RSM).
Exceptions are also required for RSM as well if it is installed. This comes up most
frequently with the Windows firewall.
Windows Requirements
For supported platforms and system requirements, go to:
http://www.ansys.com/Support/Platform+Support
Additional Product-Specific Prerequisites
The product release notes may show additional product-specific prerequisites, includ-
ing system requirements. You can find the product release notes in the View Release
Notes option of the initial splash screen, or in the readme file after installing the soft-
ware.
Additional Resources
General: The ANSYS web site: http://www.ansys.com.
Downloads: Software downloads (including FLEXlm for Ansoft) and installation-
related documentation are available at the ANSYS customer portal,
http://www.ansys.com/customerportal
Online Technical Available through the ANSYS customer portal:
Support: http://www.ansys.com/customerportal
Under Online Support, choose ANSYS Electromagnetics
Customer Support.
ANSYS Electromagnetics’s technical support site provides access to
frequently asked questions, application notes, presentations, and
example scripts.
Product Release During installation, read the release notes. In the initial setup
Notes: window, click View Release Notes to see any important, late-
breaking information that was not included in the ANSYS
Electromagnetics Installation Guide. After installation, the release
notes are available in the readme file located in the product directory.
Product Getting Started Guides and other printed documentation may be
Documentation: available at the following locations:
In the product package.
On the product CD in the Documentation directory,
depending on the product (in Portable Document
Format [PDF]).
Online help files are accessible from the Help menu of each applica-
tion installed, and they are located in the Help subdirectory of each
product directory. The online help system includes two formats:
Microsoft HTML Help and pdf.
For the Install Libraries option, see Install Libraries Options chapter.
12. Click Next.
13. On the Select Program Folder screen, do one of the following to specify a name
for the program folder:
• Accept the default name displayed in the Program Folders box.
• Select an item from the Existing Folders list.
• Type a new name for the folder in the Program Folders box.
Note The program folder, which appears on the Windows Start menu, is a
grouping of related software that includes executable files and other
components. The default programs folder is ANSYS Electromagnetics
(Start>All Programs>ANSYS Electromagnetics).
For additional information about the three license options, click Help me decide
which of the following options to choose. This displays a browser page with
additional explanations.
Note You can review the current license configuration by clicking View current
license configuration.
Select this if you recently Select this if you are using a Select this if you already have
received a license file from counted license and already a license file for previous
ANSYS (either evaluation or know on which machine ANSYS software and want to
purchased). FLEXlm is/will be installed. keep the same configuration.
17. Select the checkbox for the appropriate USB or parallel port device.
Note Multiple USB FLEXid 9 USB dongles on a machine are not supported in
64-bit Windows or Linux products.
The Setup Status screen appears, displaying a progress bar, and installation
begins. You can click Cancel at any time to exit the installation.
Note If you receive a message about read-only files, you typically want to
overwrite them with the newer versions.
20. Once the files have all been copied, one of the following messages appears:
• If you identified as the license server the same machine where you installed
the ANSYS Electromagnetics software, then a message appears that informs
you that you must install FLEXlm for Ansoft license server on this machine
(refer to “Installing the License Server” on page 5-1 for details). Click OK.
• If you identified as the license server a machine other than where you
installed the ANSYS Electromagnetics software, then a message appears
that identifies that machine as the license server and informs you that you
must install FLEXlm for Ansoft license server on that machine. Click OK.
• If you supplied an uncounted evaluation license, no message appears. You
do not need to install FLEXlm for Ansoft. Please make sure to install the
hardware key on the machine where the software is installed.
21. When the installation is complete, a Setup Complete window appears.
If ANSYS Electromagnetics's Remote Simulation Manager (RSM) is available
for this product, you will see one of two checkbox options:
• If RSM is not installed, you will see a checkbox to launch the RSM installa-
tion and, once the installation is complete, register this ANSYS Electromag-
netics product with RSM. If you select this option and press Finish, the
product installation ends and the RSM installation is automatically started.
• If RSM is installed, you will see a checkbox to register this ANSYS Electro-
magnetics product with RSM.
See chapter 3 for more details on RSM.
If ANSYS Electromagnetics's Remote Simulation Manager (RSM) is not avail-
able for this product, you will see a checkbox to view the release notes for this
product.
22. Click Finish.
The initial setup Installation Shell reappears.
Note If you choose not to integrate the product with ANSYS during installation,
you can perform this step after installation.
2. In the Integration with ANSYS dialog box, ensure that the Yes radio button is
selected,
Then click OK to complete the integration process. Then OK the information dia-
logue.
You can confirm that ANSYS is “aware” of the ANSYS Electromagnetics integrated
applications via the ANSYS Workbench Options dialog, which shows the paths to
the integrated ANSYS Electromagnetics applications.
Remote Simulations
Most ANSYS Electromagnetics products offer remote simulation capabilities, where
you can run a simulation on a different machine from the one on which the ANSYS
Electromagnetics software was started. This is particularly useful if you want to take
advantage of a more powerful machine but it is not convenient to directly access that
machine. This can also be extended into distributed analysis, where a specified analy-
sis, if supported, is concurrently solved on multiple processors and/or multiple nodes.
ANSYS Electromagnetics supports its own Remote Simulation Management (RSM)
software, as well as a number of High Performance Computing (HPC) software man-
agement programs (see High Performance Computing Integration below).
To run a networked installation of ANSYS Electromagnetics desktop products from a
Windows node, the Visual Studio redistributables must be installed on each node.
Installing RSM
To install ANSYS Electromagnetics RSM software:
1. If you checked to install the Remote Simulation Manager during the software
installation, the ANSYS Electromagnetics Remote Simulation Manager installer
appears. You can also install the Remote Simulation Manager as an installation
option on the installation CD.
A Welcome screen appears.
Note The user selected will run remote and distributed analyses when no user is
specified in the product interface.
9. On the Select Program Folder screen, do one of the following to specify a name
for the program folder:
• Accept the default name displayed in the Program Folders box.
• Select an item from the Existing Folders list.
• Type a new name for the folder in the Program Folders box.
Note The program folder, which appears on the Windows Start menu, is a
grouping of related software that includes executable files and other
components. The default programs folder is (Start>All
Programs>ANSYS Electromagnetics).
The Setup Status screen appears, displaying a progress bar, and installation
begins. You can click Cancel at any time to exit the installation.
Note If you receive a message about read-only files, you typically want to
overwrite them with the newer versions.
terEnginesWithRSM.exe).
Note The v2.0.50727 bit is important as picking up CasPol.exe from v4, v3.5
directories will not do the expected thing.
The order of backward/forward slashes in the CasPol.exe command is
important.
The above four lines can be put into a batch file and run on each machine. If an
IT admin is available however, he/she should be able to figure out how to provide
full trust to the share on which ANSYS Electromagnetics products are installed
in the group security policy: the group policy will affect all computer accounts in
that group and is the easiest way to update all the computers expected to run
ANSYS Electromagnetics products from the share.
If you have previously installed libraries, you see a screen that lets you Remove
Libraries.
The Install Wizard for the ANSYS Electromagnetic Common Libraries appears.
5. Click Next.
The License Agreement screen appears.
6. Read the license agreement carefully. Click Yes if you accept the terms of the
agreement.
The Customer Information screen appears.
7. Enter your information in the User Name and Company Name boxes.
8. Click Next.
The Choose Destination Location screen appears.
9. Under Destination Folder, do one of the following to accept the default path or
specify a new one:
• Accept the default installation directory listed under Destination Folder.
• To select a different directory, click Browse. The Choose Folder window
appears. Select a directory, and click OK. If you have other ANSYS Electro-
magnetics software we recommend that you install new software in the same
directory.
• To create a new directory, click Browse. The Choose Folder window
appears. Enter the new name in the Path field, and click OK.
Single Machine
Single machine containing the following:
• ANSYS Electromagnetics software
• Hardware key (if required)
• FLEXlm for Ansoft license server (daemon) installed
(node-locked license)
Using a single machine setup, the ANSYS Electromagnetics software works only on
the computer to which it is locked.
Do the following to install ANSYS Electromagnetics software in a single machine set
up:
1. If required, attach the hardware key to the computer where you will install and
use ANSYS Electromagnetics software.
2. Install the ANSYS Electromagnetics software on the same machine.
3. Install and start the FLEXlm for Ansoft license server on the same machine.
Single-Server Network
(Same or Mixed-platform Networked Machines)
License server machine containing the following:
• ANSYS Electromagnetics software may or may not
be installed
• Hardware key (if required)
• FLEXlm for Ansoft license server (daemon) installed
(floating license)
Using a single-server network setup, you can run the ANSYS Electromagnetics soft-
ware from any computer where it is installed.
Do the following to install ANSYS Electromagnetics software in a single-server net-
work set up:
1. If required, attach the hardware key to the server computer.
2. Install the ANSYS Electromagnetics software on the server and/or the client
machines.
3. Install and start the FLEXlm for Ansoft license server on the license server
machine, if not already done. This machine must be accessible, through the net-
work, to each client machine.
Using a triple-redundant server network setup, you can run the software from any
computer where it is installed.
Do the following to install ANSYS Electromagnetics software in a triple-redundant
server network set up:
1. If required, attach a hardware key to each server computer.
2. Install the ANSYS Electromagnetics software on the servers and/or the client
machines.
3. Install and start the FLEXlm for Ansoft license server on all three license server
machines, if not already done. These machines must be accessible, through a net-
work, to each client machine.
Note To check out a license when using a triple-redundant server network set up,
at least two servers (a quorum) must be running at any given time.
9. Click Next.
The Review Setup screen appears.
10. Make sure that all other programs are closed (press ALT+TAB to find open appli-
cations). Then check the information displayed under Current Settings, and do
one of the following:
• If the settings are correct, click Next to start copying files.
• If the settings are incorrect, click Back as many times as necessary, and edit
the information. When correct, return to the Start Copying Files screen, and
click Next.
The Setup Status screen appears and displays a progress bar. You can click Can-
cel at any time to exit installation. As soon as the installation is complete, the
InstallShield Wizard Complete screen appears.
11. Click Finish.
A confirmation message appears, announcing that the Ansoft License Utility is
about to start.
13. In the Ansoft License Utility, do one of the following to select a directory that
contains ANSYS Electromagnetics license files:
• Accept the default in the License File Storage Directory field. The
5-6 Installing the License Server
ANSYS Electromagnetics Windows Installation
License File Storage Directory field displays the location where all
license files will be stored. If you change this location, any license files
stored in the previous location will not be automatically moved to the
new location; you must use the Add File command to find and add them
to the Existing License Files list.
• Change the license file storage directory:
a. Click Change to select a new directory.
A message appears asking if you are sure you want to change the
directory.
b. Click Yes.
The Browse for Directory window appears.
c. Select the directory, and click OK.
The Ansoft License Utility window reappears, with the new path
in the License File Storage Directory field. The Existing License
Files list is updated. This list displays only files with a .lic exten-
sion that are in that directory.
14. If necessary, add a new license file obtained from ANSYS Electromagnetics.
To select a new license file, do the following:
a. Click Add File.
The Open window appears.
b. Find and select the file you want.
c. Click OK.
d. If another window appears asking you to rename the file, enter a new
filename for the license file, and click OK. The Ansoft License Utility
appends a .lic extension to the filename you enter.
15. Make sure the Start License Service on Power Up check box is selected.
Note This option causes FLEXlm for Ansoft to start automatically when you
restart your computer. If you do not want it to start automatically, clear the
Start License Service on Power Up check box.
At any time after installation, you can use the Ansoft License Utility for
ongoing management of Ansoft license files, as described in “Managing
License Files After Installation” on page 5-9.
16. Click OK to save changes and close the Ansoft License Utility.
A message appears, stating that the FLEXlm for Ansoft license service has been
saved.
If an error occurs, you must correct it before you can use ANSYS Electromagnet-
ics software. See Managing License Files After Installation for more information.
17. Click OK.
A second message appears, stating that the FLEXlm for Ansoft license service
has started.
18. Click OK to close the message and complete the installation.
After the FLEXlm for Ansoft license server software is installed, the installation
may ask if you want to restart your computer. You can restart your computer now
and activate the changes, or you can wait until later (for instance, if you need to
close any open applications).
Note If you are prompted to restart your computer, then the FLEXlm for Ansoft
service cannot be started until you do so.
2. Click Yes.
The Browse for Directory window appears.
3. Select the directory, and click OK.
4. The Ansoft License Utility window reappears, with the new path in the License
File Storage
Directory field. The Existing License Files list is updated. This list displays
only files with a .lic extension that are in that directory.
Viewing License Files
You can view license files that appear in the Existing License Files list.
To view a license file:
1. Select the license file you want to view from the Existing License Files list.
2. Click View File.
A new window opens, displaying the text of the license file.
3. After viewing the license file, click OK.
The license file cannot be edited from within the Ansoft License Utility. To edit the
license file, open it in a text editor (for example, Notepad).
Note If the file you selected does not have a .lic extension, you are asked to enter
a new name for the license file. Enter a name for the license file, without
the extension, and click OK. The Ansoft License Utility automatically
appends the .lic extension.
age directory.
• The contents of your log file.
Accessing Ansoft License Utility Online Help
To view the online help for the Ansoft License Utility, click the Help button in the
bottom right of the Ansoft License Utility window.
Closing the Ansoft License Utility
To close the Ansoft License Utility window, click OK.
The Ansoft License Utility saves any changes and exits.
Registry Data for FLEXlm for Ansoft
When launched, the Ansoft License Utility checks the registry for an existing
FLEXlm for Ansoft service. These registry entries are in the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\FLEXlm License Manager\FLEXlm
for Ansoft.
There are three value data pairs:
• License: Contains the path to a license file or directory.
• Lmgrd: Contains the path to lmgrd.exe.
• LMGRD_LOG_FILE: Contains the path to the log file.
After installation, you may need to reinstall the software, update a license, or add a
software component, such as a library. If you have already installed the software, the
next time you run the Setup program, the installation starts in Maintenance mode.
Note Select I have a new license file to change the license file (if you received a
new one from ANSYS Electromagnetics, either evaluation or purchased).
Select I want to specify a license server if you need to change the name of
the machine where FLEXlm for Ansoft is installed.
See page 2-6, in Chapter 2, “Installing ANSYS Electromagnetics
Software,” for more details on available license options.
When you use ANSYS Electromagnetics’s silent installation feature, the software is
installed on your computer with no windows appearing during the installation pro-
cess. InstallShield suppresses all dialog boxes, including error messages and informa-
tional message boxes.
To install ANSYS Electromagnetics software using a silent installation:
• Obtain a license file for the software you are installing.
• Obtain and install a hardware key if necessary.
• On a representative machine, install the ANSYS Electromagnetics software
once from the command prompt, as described in this chapter.
In silent mode, no confirmation windows of any kind are displayed. In this mode,
InstallShield suppresses all dialog boxes, including error messages and informational
message boxes.
4. To verify that the silent setup succeeded, open the setup.log file, and look at the
ResultCode value in the [ResponseResult] section. If the value is zero, the instal-
lation was successful.
A-2 Silent Installation
ANSYS Electromagnetics Windows Installation Guide
If a failure occurs in silent mode, Setup aborts just as if you clicked the Abort
button in a wizard dialog box during a normal installation. In this case, an error is
written to the log file.
Note The installation typically fails for one of the following two reasons:
• An invalid path was specified on the command line.
• There were differences in the dialog box sequences between the
recorded response file and the current silent installation — for
example, an additional message appearing during the playback due to
differences in the two computer systems. Since most computers would
normally be configured identically by a system administrator, this
problem should not occur often.
Silent Codes
Result Description
Code
0 Success.
-1 General error.
-2 Invalid mode.
-3 Required data not found in the Setup.iss file.
-4 Not enough memory available.
-5 File does not exist.
-6 Cannot write to the response file.
-7 Unable to write to the log file.
-8 Invalid path to the InstallShield Silent response file.
-9 Not a valid list type (string or number).
-10 Data type is invalid.
-11 Unknown error during setup.
-12 Dialog boxes are out of order.
-51 Cannot create the specified folder.
-52 Cannot access the specified file or folder.
-53 Invalid option selected.
Software licenses for each module of ANSYS Electromagnetics products you pur-
chased are contained in one or more license files provided by ANSYS. Each license
file requires one or more license hostids, which are physical devices that contain a
unique identification. License hostids are always required for the license server, and
they may also be required for each machine running ANSYS software.
Each supported operating system supports certain hostids:
Linux
To obtain an ethernet address as a valid license hostid when running Red Hat Enter-
prise Linux:
1. If you are using a laptop, disconnect the laptop from the docking station if
docked.
2. Start a terminal session.
3. Type ip addr (normally located in the /sbin directory) to see a listing of all
active network devices.
4. Devices with an ethernet address show a Link encap value of Ethernet. The eth-
ernet address for each device is the value in the HWaddr field, without colons.
Hardware Key
A Macrovision FLEXid hardware key may be provided to you by ANSYS
Electromagnetics as your physical device. The license hostid of a hardware key is affixed
to the hardware key itself. The hostid is a 17- to 21-character value that begins with
FLEXID=.
Installing a Hardware Key on a Parallel Port
Multiple devices can be installed on a single parallel port.
Macrovision FLEXid hardware key for a
Parallel Port
To install the hardware key on a parallel port:
1. Disconnect any devices attached to your main
printer (parallel) port.
2. Attach the hardware key to the printer port.
The holes on the top and/or bottom should
remain empty.
3. Reconnect the other devices to the back end of
the hardware key. The key should not interfere
with them.
Machine hostid
A machine hostid is present on most Unix machines, including Sun machines. To
determine the hostid for a supported Unix machine, enter the following command:
Symbols C
.lic file 2-2 changing license servers 5-4
closing the Ansoft License Utility 4-16
contents of product package 1-1
A copyright notice 2-ii
adding license files 4-12
Ansoft License Utility
adding license files 4-12
D
closing 4-16 debugging license problems 4-15
exporting license information 4-15 deleting service configuration 4-15
FLEXlm log file 4-14 dongle
installing 4-2 installing 2-2
online help 4-16
removing license files 4-12
renaming license files 4-12 E
service manager settings 4-15 exporting license information 4-15
troubleshooting/debugging license prob-
lems 4-15
ANSYS Electromagnetics software F
installing 2-1 files
silent installation A-1 .lic 2-2
uninstalling 5-2 FLEXlm daemon 1-2
upgrading 5-2 FLEXlm for Ansoft license server 1-2
installing 4-2
Maintenance mode 5-6
removing 5-6
Index-1
ANSYS Electromagnetics Windows Installation Guide
T
TCP/IP 1-2
trademark notice 2-ii
troubleshooting license problems 4-15
U
uninstalling ANSYS Electromagnetics soft-
ware 5-2
updating a software license 5-4
updating license file 5-2
updating the FLEXlm for Ansoft license server
5-6
upgrading software 5-2
V
video drivers
recommended 1-4
Index-3
ANSYS Electromagnetics Windows Installation Guide
Index-4