Documente Academic
Documente Profesional
Documente Cultură
CHOOSE THE
MATERIAL THAT
WORKS FOR YOU
Innovation and longevity are the basis and at the same time key to a successful,
comprehensive materials portfolio. Ivoclar Vivadent is at home in the world of materials.
With Ivoclar Digital, the company is now pooling its digital expertise under a new brand.
REMOVABLE PROSTHETICS
PROCESS-SUPPORTING MATERIALS
FIXED
PROSTHETICS
IPS e.max CAD
®
Telio CAD
®
Viteo Base
®
5 steps to the
correct shade and The IPS e.max Shade Navigation App recommends the
best fitting translucency and shade for your IPS e.max restoration.
All important influencing factors are taken into account
translucency for the overall shade effect. SNA
IPS e.max ZirCAD ®
Milling and IPS e.max ZirCAD offers you a wide range of options in the fabrication of restorations.
You can mill different IPS e.max ZirCAD restorations during the day and sinter them
sintering
during the night in the Programat® S1 1600 using one program. When time is short,
speed sinter programs can be chosen.
IPS e.max® ZirCAD
are innovative zirconium oxide discs and blocks.
Choose IPS e.max ZirCAD when high mechanical strength, low wall
thicknesses and very high esthetics are required. This material is
suitable for the production of monolithic and veneered crowns and
bridges for the anterior and posterior regions. Due to a strength of
between 850 and 1,200 MPa* and high fracture toughness, the wall
thicknesses of all-ceramic restorations can be reduced to a minimum.
This means more natural tooth structure can be preserved during
preparation.
INDICATIONS
* Typical mean value of biaxial flexural strength dependent on the
translucency level, R&D Ivoclar Vivadent, Schaan, Liechtenstein
IPS e.max® – IPS e.max is the only all-ceramic material to combine lithium disilicate glass-ceramic
INDICATIONS
– Veneers
– Inlays, onlays
– Partial crowns
– Crowns
Economical
and fast Grind – polish – done!
Telio CAD ®
Telio® CAD
are cross-linked PMMA blocks and discs. This material allows you to Convincing the patient
produce temporary crowns, bridges and hybrid abutment crowns. The The excellent visual appearance of the temporary material allows you to
industrial polymerization process makes the material very homoge- show your patient what the final result will look like whilst the restoration
neous. This means Telio CAD can be easily processed. is still in its temporary state.
Prior to insertion, you can choose whether the restoration should be Reducing the amount of rework required
polished or individualized with the stains and layering materials of the Give your patient a natural-looking smile: with a material which is
SR Nexco light-curing laboratory composite range. comfortable to wear, shows hardly any discoloration and has a low
affinity to plaque. However, it is not only comfortable to wear for the
patient, but also the amount of rework required is thus reduced.
INDICATIONS
– Temporary crowns and bridges
– Temporary hybrid abutment
crowns *
* c oming soon
Easy to process,
good to wear
Easy to mill as well as visually esthetically and clinically proven: The temporary restoration can be
polished to a high gloss easily and quickly.
Colado CAD ®
Reliable results
No matter whether a veneered or full-contour restoration is created:
The uniform metal structure provides for an even milling procedure
throughout the entire disc. This helps you to save time during
polishing.
INDICATIONS
Colado® CAD CoCr4
– Veneered crowns No surprises
– Large bridges The milled crowns and bridges have uniform,
– Bridges with small cross-sections homogeneous material properties. This prevents
– Bars the risk of fluctuating quality and reproducible
– Impant-supported superstructures results are possible.
Wide
MAKE IT
!
YOUR
range of
STYLE
The type 4 alloy classification can be used to
indications
cover a wide range of indications - with only
one material. This way you reduce your stock.
Colado® CAD Ti2
are pure titanium discs. They are suitable for the production of crowns
and bridge frameworks for the anterior and posterior region. Depending
on the situation and the indication, you can use the light-curing laboratory
composite SR Nexco® to veneer the restorations. The CTE range of
Colado CAD Ti2 is 9.6 ± 0.5 x 10-6/K.
INDICATIONS
Colado® CAD Ti2
– Fixed, multi-unit restorations, e.g. bridges
Colado® CAD Ti5
– Veneered crowns
– Large bridges
– Bridges with small cross-sections
– Bars or implant-supported superstructures
Wide
range of Depending on the requirements, choose
materials
a disc made from alloy or pure titanium.
Colado CAD offers both options.
Viteo Base ®
Viteo® Base
is the titanium bonding base from the materials specialist. Viteo Base Increased bond strength achieved in a jiffy
is suitable for the fabrication of implant-supported single-tooth The preconditioned (sandblasted) bonding surface allows you to save
restorations. one working step. This means you can immediatelly start with the
cementation procedure.
The special soft edge design of the bonding surface, including a
special geometry and recessed rotation protection, is ideally suited for Higher bond strength even without sandblasting
CAD and press-ceramic materials and therefore supports long-term The industrially preconditioned shaft surface ensures a reliable bond.
clinical success. Since the fragile areas of the titanium bonding base, such as the
cervical area and the emergence profile, remain undamaged during
The recessed rotation protection is located vertically throughout the industrial processing, the necessity for post-polishing is eliminated
entire height of the shaft. As a consequence, the minimum thickness of and the implant connection stays uncompromised.
the restoration material can be maintained with ease.
Longevity vs fracture risk
Viteo Base is coordinated with the most commonly used implant The fracture risk of restorations can be minimized through a soft
sytems. design of the titanium bonding base: The soft edge design ideally
supports the restorative material and thus increases the longevity of
restorations. The titanium bonding base is especially designed for
press and CAD/CAM ceramics.
Easy
adjustment
Viteo Base can be shortened from 6 to 4 mm and thus provides maximum flexibility. This also means
that your inventory of titanium bonding bases becomes more manageable.
INDICATIONS
– Implant-supported single-tooth
restorations
REMOVABLE
PROSTHETICS
SR Vivodent CAD
®
IvoBase CAD
®
SR Vivodent CAD ®
SR Vivodent® CAD
are tooth-coloured discs made from DCL material which are suitable
for the individual design and production of whole tooth segments. The
long-lasting dental restorations are individually customized to
integrate with the patient’s natural antagonist teeth.
INDICATIONS
– Tooth segments in removable denture
prosthetics (digital denture)
IvoBase CAD ®
IvoBase® CAD
IvoBase CAD are PMMA discs for the production of denture bases.
The shade concept matches that of Ivoclar Vivadent’s denture base
material IvoBase®. Therefore, the most popular shade requirements
can be met.
INDICATIONS
– Denture bases in removable denture
prosthetics (digital denture)
Add-on
Digital Digital Denture is a complete manufacturing process for the fast, digital manufacturing of removable dentures. This new
innovative process links the digital production of dentures in the laboratory with established dental treatment steps.
Solutions
The exclusively developed Digital Denture design software add-on and the ideally coordinated materials together
Denture with the PrograMill milling machines ensure reliable and consistent results.
PROCESS-
SUPPORTING
MATERIALS
ProArt CAD
Polymers and waxes
ProArt CAD
INDICATIONS
ProArt CAD Try-In
– Functional try-ins, impression trays
and functional trays
ProArt CAD Transfer
– Transfer templates
Precise The more precise the preparation, the better the result. As a CAD/CAM auxiliary
material, ProArt CAD provides support during the different working steps that are
preparation necessary to achieve highly esthetic restorations.
ProArt CAD Splint ProArt CAD Model
are discs made from a clear PMMA material. They are used to produce are discs made from beige-coloured, fracture-proof polyurethane (PU).
occlusal splints, e.g. for the treatment of bruxism. Drilling templates With this material it is possible to produce models using digital
for implants can also be produced from the discs. technology. The material, which can be steam cleaned, has a high
material density and therefore a smooth, even surface.
INDICATIONS
ProArt CAD Splint
– Therapeutic restorations for the correction
of TMJ problems and adjustments of the
occlusal plane
– Occlusal splints
– Drilling templates
ProArt CAD Model
– Production of acrylic models
Quick and Due to simple material processing, you will receive precise results within a short space of time. And your
clean
CAM unit also benefits from good millability, because the even chip formation reduces the contamination of
the machine.
ProArt CAD Wax
The process-supporting ProArt CAD discs serve to transform conventional working steps in
the laboratory into entirely digital processes. The dimensionally stable polymer and wax discs
are easy to mill. As CAD/CAM auxiliary materials, they cover a wide range of indications. The
different ProArt CAD wax discs form the basis for detailed and accurate objects in dental
technology.
Increased
machine The wax discs are easy to mill and streamline the Less The milled objects are distinguished by their
smooth surfaces. The pressed or cast restora-
utilization rework
fabrication of wax objects. Machine utilization tions have a high surface quality, and this
can be increased as a result. reduces the reworking time.
Indications overview
Block sizes I12, C14, C16, B32 C17, B45 I12, C14, C14L
Other sizes
INDICATIONS* IPS e.max® CAD IPS e.max® ZirCAD IPS Empress® CAD
Thin veneers 3
Veneers 3 3
8, 10, 12, 13.5, 15, 8, 10, 12, 8, 10, 12, 13.5, 15,
16, 20, 25 mm 20 mm 30 mm 10 mm
18, 20, 24.5 mm 13.5, 15 mm 18, 20 mm
6 mm shaft height,
adjustable to 4 mm
Telio® CAD LT
Colado® CAD CoCr4 Colado® CAD Ti2 Colado® CAD Ti5 Viteo® Base SR Vivodent® CAD IvoBase® CAD ProArt CAD Transfer
(Low Translucency)
3 3
3 3
3 3
3 3 3
3 3 3
3 3 3
3
3
3 3
3 3
3 3 3
3
3 ** 3
3
30 mm 16 and 20 mm 25 mm 30 mm 16 and 20 mm 12 and 20 mm
3 3
3 3
3 3
3 3
3 3
3
3 3
3 3
3
3
3
3
3 3
3
3
3
DISCOVER MORE
Scanners/CAD
Discover the latest scanning technology and modern design combined
with intelligent software applications: From the current 3Shape scanner
generation, the correct device can be chosen according to the situation
and laboratory requirements. Various software add-ons,
e.g. “Digital Denture”, provide new opportunities.
Materials
Choose the ideal veneering material for your digitally produced
frameworks and restorations:
Equipment/CAM
Choose the PrograMill milling machines: With PrograMill One,
PrograMill PM3, PM5 and PM7, every laboratory finds the correct device –
depending on the laboratory size, production volume and the required
range of indications. Process the high performance Ivoclar Digital materials
according to the needs of your laboratory and your customers.
DIGITAL EXPERTISE
UNDER ONE ROOF
Ivoclar Digital is a competent digital partner, which supports dentists and dental technicians along the
entire digital process chain. A great deal of importance is placed on simple and understandable procedures.
The portfolio for the digital work process is divided into three areas:
S E R V I C E +
Service+ The offer is complete with Service+. The service provision makes your entry into digital production easier and
serves as an outsourcing or back-up partner.
690016/EN/2017-11-09
Distribution:
www.ivoclarvivadent.com/distributors
Connected to you
ivoclardigital.com