Documente Academic
Documente Profesional
Documente Cultură
SP1134
TRADEMARKS
All rights to copyrights, registered trademarks, and trademarks reside with
their respective owners.
Section 1 - Installation
Introduction ............................................................... 9
Installation Items Checklist..................................................... 9
Installation and Operation Requirements................................ 9
Connectors ......................................... 10
Connect Power ......................................... 11
Connecting to DeviceNet ...................................................... 12
DeviceNet Connector ......................................... 12
Setting the MAC ID Using the BWConfig Tool ................... 12
Connecting to Ethernet.......................................................... 14
Ethernet Connector ......................................... 14
Setting the IP Address ......................................... 15
Configuration Port Connector ............................................... 19
3BSE059754R0001 5
Table of Contents
6 3BSE059754R0001
Safety Summary
3BSE059754R0001 7
Section 1 Installation
Introduction
This section describes the installation requirements for DeviceNet
Linking Device LD 800DN and the installation procedure.
3BSE059754R0001 9
Connectors Section 1 Installation
Connectors
The following Figure 1 displays the connectors for LD 800DN.
10 3BSE059754R0001
Section 1 Installation Connect Power
Connect Power
The LD 800DN requires 24 V DC power for the 2 position
terminal block connector.
3BSE059754R0001 11
Connecting to DeviceNet Section 1 Installation
Connecting to DeviceNet
DeviceNet Connector
DeviceNet is connected to the 5 position terminal block connector.
12 3BSE059754R0001
Section 1 Installation Setting the MAC ID Using the BWConfig Tool
3BSE059754R0001 13
Connecting to Ethernet Section 1 Installation
Connecting to Ethernet
Ethernet Connector
The Ethernet cable is connected to the RJ45 connector at the end
of the module.
14 3BSE059754R0001
Section 1 Installation Setting the IP Address
3BSE059754R0001 15
Setting the IP Address Section 1 Installation
Table 1. IP addresses
IP Address: 192.168.1.n
Example:
16 3BSE059754R0001
Section 1 Installation Setting the IP Address
3BSE059754R0001 17
Setting the IP Address Section 1 Installation
18 3BSE059754R0001
Section 1 Installation Configuration Port Connector
3BSE059754R0001 19
Configuration Port Connector Section 1 Installation
20 3BSE059754R0001
Section 2 Technical Specifications
Environmental Specifications
Operating Temperature: 0° C to 65° C.
Non-Operating Temperature: -25° C to 85° C.
Electrical Specifications
Power Supply: 12 VDC - 30 VDC.
Current Requirements: 130 mA - 140 mA at 24 VDC.
3BSE059754R0001 21
Further Technical Information Section 2 Technical Specifications
22 3BSE059754R0001
Contact us
ABB AB
Control Systems
3BSE059754R0001
Copyright © 2003-2010 by ABB.
Västerås, Sweden All Rights Reserved
Phone: +46 (0) 21 32 50 00
Fax: +46 (0) 21 13 78 45
E-Mail: processautomation@se.abb.com
www.abb.com/controlsystems
ABB Inc.
Control Systems
Wickliffe, Ohio, USA
Phone: +1 440 585 8500
Fax: +1 440 585 8756
E-Mail: industrialitsolutions@us.abb.com
www.abb.com/controlsystems