Documente Academic
Documente Profesional
Documente Cultură
TO-220FPAB
FEATURES AND BENEFITS
STPS30150CFP
■ HIGH JUNCTION TEMPERATURE CAPABILITY
■ GOOD TRADE OFF BETWEEN LEAKAGE
CURRENT AND FORWARD VOLTAGE DROP
■ LOW LEAKAGE CURRENT
■ INSULATED PACKAGE: TO-220FPAB
Insulating voltage: 2000V DC
Capacitance: 45pF A2 A2
K K
■ AVALANCHE CAPABILITY SPECIFIED A1
A1
TO-247 TO-220AB
DESCRIPTION
STPS30150CW STPS30150CT
Dual center tap schottky rectifier designed for
high frequency Switched Mode Power
Supplies.
TO-247 30
IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 220 A
PARM Repetitive peak avalanche power tp = 1µs Tj = 25°C 10500 W
Tstg Storage temperature range - 65 to + 175 °C
Tj Maximum operating junction temperature * 175 °C
dV/dt Critical rate of rise of reverse voltage 10000 V/µs
dPtot 1
* : < thermal runaway condition for a diode on its own heatsink
dTj Rth( j − a )
THERMAL RESISTANCES
Fig. 1: Average forward power dissipation versus Fig. 2: Average forward current versus ambient
average forward current (per diode). temperature (δ = 0.5, per diode).
PF(av)(W) IF(av)(A)
14 δ = 0.2 18
δ = 0.1 δ = 0.5
TO-220AB/TO-247/I²PAK/D²PAK
12 16 Rth(j-a)=Rth(j-c)
δ = 0.05
14
10 δ=1
12
TO-220FPAB
8 10
Rth(j-a)=15°C/W
6 8
6
4 T T
4
2 2
IF(av) (A) δ=tp/T
Tamb(°C)
tp δ=tp/T tp
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0 25 50 75 100 125 150
2/6
STPS30150CT/CW/CFP
Fig. 3: Normalized avalanche power derating Fig. 4: Normalized avalanche power derating
versus pulse duration. versus junction temperature.
PARM(tp) PARM(tp)
PARM(1µs) PARM(25°C)
1 1.2
0.1 0.8
0.6
0.01 0.4
0.2
tp(µs) Tj(°C)
0.001 0
0.01 0.1 1 10 100 1000 0 25 50 75 100 125 150
Fig. 5-1: Non repetitive surge peak forward Fig. 5-2: Non repetitive surge peak forward current
current versus overload duration (maximum versus overload duration (maximum values, per
values, per diode). diode) (TO-220FPAB only).
IM(A) IM(A)
250 140
120
200
100
150 80 Tc=25°C
Tc=50°C
60 Tc=75°C
100 Tc=75°C
40 Tc=125°C
IM
50 IM Tc=125°C
20
t
t(s)
t
δ=0.5
t(s)
δ=0.5
0 0
1E-3 1E-2 1E-1 1E+0 1E-3 1E-2 1E-1 1E+0
Fig. 6-1: Relative variation of thermal impedance Fig. 6-2: Relative variation of thermal impedance
junction to case versus pulse duration (per diode) junction to case versus pulse duration.
(TO-220FPAB)
Zth(j-c)/Rth(j-c) Zth(j-c)/Rth(j-c)
1.0 1.0
0.8 0.8
δ = 0.5
0.6 0.6 δ = 0.5
3/6
STPS30150CT/CW/CFP
Fig. 7: Reverse leakage current versus reverse Fig. 8: Junction capacitance versus reverse voltage
voltage applied (typical values, per diode). applied (typical values, per diode).
IR(µA) C(pF)
1E+5 1000
Tj=175°C F=1MHz
Tj=25°C
1E+4 Tj=150°C
1E+3 Tj=125°C
1E+2 100
Tj=100°C
1E+1
1E+0 Tj=25°C
VR(V) VR(V)
1E-1 10
0 25 50 75 100 125 150 1 2 5 10 20 50 100 200
IFM(A)
100.0
Tj=125°C
Typical values
10.0 Tj=125°C
Tj=25°C
1.0
VFM(V)
0.1
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
4/6
STPS30150CT/CW/CFP
PACKAGE MECHANICAL DATA
TO-220AB
DIMENSIONS
REF. Millimeters Inches
Min. Max. Min. Max.
H2 A A 4.40 4.60 0.173 0.181
Dia C
C 1.23 1.32 0.048 0.051
D 2.40 2.72 0.094 0.107
L5
L7 E 0.49 0.70 0.019 0.027
F 0.61 0.88 0.024 0.034
L6
F1 1.14 1.70 0.044 0.066
L2 F2 1.14 1.70 0.044 0.066
F2
G 4.95 5.15 0.194 0.202
F1 D
L9
G1 2.40 2.70 0.094 0.106
L4 H2 10 10.40 0.393 0.409
F L2 16.4 typ. 0.645 typ.
M L4 13 14 0.511 0.551
G1 E
L5 2.65 2.95 0.104 0.116
G L6 15.25 15.75 0.600 0.620
L7 6.20 6.60 0.244 0.259
L9 3.50 3.93 0.137 0.154
M 2.6 typ. 0.102 typ.
Diam. 3.75 3.85 0.147 0.151
DIMENSIONS
REF. Millimeters Inches
A
Min. Max. Min. Max.
H B
A 4.4 4.6 0.173 0.181
B 2.5 2.7 0.098 0.106
D 2.5 2.75 0.098 0.108
Dia
E 0.45 0.70 0.018 0.027
L6
F 0.75 1 0.030 0.039
F1 1.15 1.70 0.045 0.067
L2 L7 F2 1.15 1.70 0.045 0.067
L3 G 4.95 5.20 0.195 0.205
L5
G1 2.4 2.7 0.094 0.106
D
H 10 10.4 0.393 0.409
F1 L2 16 Typ. 0.63 Typ.
L4 L3 28.6 30.6 1.126 1.205
F2
L4 9.8 10.6 0.386 0.417
L5 2.9 3.6 0.114 0.142
F E L6 15.9 16.4 0.626 0.646
G1
L7 9.00 9.30 0.354 0.366
G Dia. 3.00 3.20 0.118 0.126
5/6
STPS30150CT/CW/CFP
DIMENSIONS
V REF. Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 4.85 5.15 0.191 0.203
V Dia.
D 2.20 2.60 0.086 0.102
E 0.40 0.80 0.015 0.031
F 1.00 1.40 0.039 0.055
H
A F1 3.00 0.118
F2 2.00 0.078
F3 2.00 2.40 0.078 0.094
L5 F4 3.00 3.40 0.118 0.133
G 10.90 0.429
L H 15.45 15.75 0.608 0.620
L 19.85 20.15 0.781 0.793
L2 L4
L1 3.70 4.30 0.145 0.169
F2 L2 18.50 0.728
F1 L1
L3 14.20 14.80 0.559 0.582
F3
V2 L3
D L4 34.60 1.362
F4 L5 5.50 0.216
F(x3) M 2.00 3.00 0.078 0.118
G
M E V 5° 5°
= = V2 60° 60°
Dia. 3.55 3.65 0.139 0.143
■ Cooling method : C
■ Recommended torque value : 0.8m.N
■ Maximum torque value : 1.0m.N
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of
use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied.
STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written
approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
© 2003 STMicroelectronics - Printed in Italy - All rights reserved.
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany
Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore
Spain - Sweden - Switzerland - United Kingdom - United States.
http://www.st.com
6/6