Documente Academic
Documente Profesional
Documente Cultură
SERVICE MANUAL
CONTENTS(目次)
SPECIFICATIONS(総合仕様)................................................. 3
PANEL LAYOUT(パネルレイアウト)...................................... 4
CIRCUIT BOARD LAYOUT(ユニットレイアウト)................. 6
DISASSEMBLY PROCEDURE(分解手順).............................. 7
LSI PIN DESCRIPTION(LSI端子機能表).............................. 10
IC BLOCK DIAGRAM(ICブロック図) .................................... 10
CIRCUIT BOARDS(シート基板図)........................................ 11
INSPECTIONS(検査)............................................................ 12
このサービスマニュアルはエコパルプ TUNING(調弦)...................................................................... 13
(ECF:無塩素系漂白パルプ)を使用しています。
OVERALL CIRCUIT DIAGRAM(総回路図)........................... 14
This document is printed on chlorine free (ECF) paper.
PARTS LIST
WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in per-
sonal injury, destruction of expensive components and failure of the product to perform as specified. For
these reasons, we advise all Yamaha product owners that all service required should be performed by an
authorized Yamaha Retailer or the appointed service representative.
IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authorization certifi-
cation, recognition of any applicable technical capabilities, or establish a principal-agent relationship of
any form.
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and
service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable
and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to
exist, please contact the distributor’s Service Division.
WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to
this bus.)
IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power
to the unit.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT
SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling
food.
WARNING
Components having special characteristics are marked and must be replaced with parts having specification equal to those
originally installed.
印の商品は、安全を維持するために重要な部品です。交換する場合は、安全のために必ず指定の部品をご使用下さい。
2
SLG-100S
SPECIFICATIONS(総合仕様)
Front(フロント部) Rear(リア部)
Tuning peg
(糸巻(ペグ) )
Nut(上駒(ナット))
Fingerboard
(指板(フィンガーボード))
Neck(棹
(ネック)
)
Body(胴
(ボディ)
)
OPEN
Finger Rest
(フィンガーレスト)
Saddle(サドル)
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDEITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
• THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
• CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
SILENT GUITAR
MODEL SLG-100N ERIFIED
V
AC POWER ADAPTOR : EMC
YAMAHA PA-1E OR PA-3B OR PA-D09 SE KO
BATTERY : 9V 6LR61 OR 6F22Y M
MADE IN TAIWAN
N89
Bridge(下駒(ブリッジ)
)
4
SLG-100S
Controls(コントロール部)
Battery compartment(電池ケース)
(Use 6LR61 9V alkaline battery) POWER lamp
(6LR61 9Vアルカリ乾電池使用) (パワーランプ)
OPEN
REVERB switch
OFF 1 2
REVERB
(リバーブスイッチ)
VOLUME
VOLUME control
DC-IN jack (ボリュームコントロール)
(Power adaptor connector)
BASS control
BASS
(電源アダプター接続端子) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDEITIONS: (1) THIS DEVICE MAY NOT CAUSE
(ベースコントロール)
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
TREBLE
TREBLE control
–
SILENT GUITAR
MODEL SLG-100N ERIFIED
(トレブルコントロール)
+
OFF ON
V
Cord hook
(コードフック) PHONES jack
(ヘッドフォン端子)
MIN MAX
AUX IN jack
(外部入力端子)
5
SLG-100S
MA
PUP2
AUX
Jack
(ジャック)
6
SLG-100S
4. Horn, Right Bracket (Time required: About 2 minutes each) 4. ホーン、ブラケット(R) (所要時間:各約 2 分)
4-1 Remove the right frame. (See procedure 3.) 4-1 フレーム(R)を外します。 (3 項参照)
4-2 Horn: 4-2 ホーン:
Remove the two (2) screws marked [D08]. The horn can then be [D08]のネジ 2 本を外して、ホーンを外します。(図 1)
removed. (Fig.1) 4-3 ブラケット(R):
4-3 Right Bracket: [E21]のネジ 2 本を外して、上側のブラケット(R)を外しま
Remove the two (2) screws marked [E21]. The upper right す。 (図 1)
bracket can then be removed. (Fig.1) 下側のブラケット(R)も、 同様にして外すことができます。
The lower right bracket can be removed in the same manner.
Peg
(糸巻き) Peg
(糸巻き)
Bracket
(フレーム受けプレート) Panel holder assembly
Strings
(弦) (パネルホルダー集成)
Bracket assembly
(ブラケットAss'y) [F02] X 4
Panel holder
[E15]
(パネルホルダー) [D05]: Flat Head Tapping Screw-2 (+皿タッピングネジ2種)
Spacer
3.0X8 (QC667000)
[E19] (基板スペーサー) [D08]: Flat Head Tapping Screw (+皿タッピングネジ)
[D05] Sleeve 3.5X20 (QC667100)
(スリーブ) [E22] PUP2 [E15]: Adjusting Bolt, Front (調整ボルト(F))
M6.0XP1X25 (QC653400)
Left frame Pickup assembly
(ピックアップAss'y) [E16]: Adjusting Bolt, Rear (調整ボルト(R))
(フレーム(L)) [E21] M6.0XP1X12 (QC653500)
Bracket assembly
(ブラケットAss'y)
[E19]: Flat Head Tapping Screw (+皿タッピングネジ)
Right bracket 3.0X10 ZMC2BL (QA406400)
Horn
(ブラケット(R))
[E19] (ホーン) [E21]: Flat Head Tapping Screw (+皿タッピングネジ)
[D08] 3.0X10 ZMC2BL (QA406400)
Right bracket [E22]: Flat Head Tapping Screw-2 (+皿タッピングネジ2種)
[D05] (ブラケット(R))
Sleeve 3.0X8 (QC667000)
(スリーブ) [E21] Right frame [F02]: Bind Head Tapping Screw-1 (+バインドタッピング1種)
Bracket [E16] (フレーム(R)) 3.0X10 ZMC2BL (20404200)
(フレーム受けプレート)
[E22]
Fig.1 (図1)
7
SLG-100S
Peg(糸巻き)
Peg(糸巻き)
[A]
Fig.2 (図2)
8. PUP2 Circuit Board (Time required: About 3 minutes) 8. PUP2 シート (所要時間:約 3 分)
8-1 Remove the panel assembly. (See procedure 6.) 8-1 パネル Ass'y を外します。(6 項参照)
8-2 Remove the four (4) screws marked [F02]. The panel holder 8-2 [F02]のネジ 4 本を外して、パネルホルダー集成を外しま
assembly can then be removed. (Fig.1) す。 (図 1)
8-3 Remove the PUP2 circuit board from the two (2) spacers. (Fig.1) 8-3 基板スペーサー 2 個から PUP2 シートを外します。(図 1)
AUX [B]
Panel Assembly
(パネルAss’ y) MA [16A] Jack (LINE connector assembly) Bridge saddle (下駒枕)
(ジャック (LINE束線) )
Strings (弦)
Bridge
(下駒)
[16A] Pickup assembly
AUX
[BASS] (ピックアップ
(ピックアップAss'y)
ピックアップ)
[VOLUME] [TREBLE]
Rotary knob Photo.1 (写真1)
(ロータリーツマミ)
9
SLG-100S
IC BLOCK DIAGRAM(ICブロック図)
Output A 1 +V 8
+DC Voltage Output A 1 +V 8
+DC Voltage
Supply Supply
Inverting Inverting
2 7 Output B 2 7 Output B
Input A - + Input A - +
Non-Inverting 3 6
Inverting Non-Inverting 3 6
Inverting
Input A + - Input B Input A + - Input B
Ground 4 -V 5 Non-Inverting -DC Voltage Supply 4 -V 5 Non-Inverting
Input B Input B
10
SLG-100S
CIRCUIT BOARDS(シート基板図)
MA Circuit Board
Note: See parts list for details of circuit board component parts.
POWER Lamp
REVERB
GR
注: シートの部品詳細はパーツリストをご参照下さい。
OFF/1/2
VOLUME
BASS
to LINE OUT
TREBLE
Jack
ON/OFF
DC-IN 9~12V
PHONES
to Battery
terminal
AUX IN
AUX VOL
MIN/MAX
to Pickup (LR-Baggs)
Component side Component side Pattern side
Pattern side
(部品側) (パターン側) (部品側) (パターン側)
AUX, MA: ENA-V987840-1, 2
PUP2: ENA-WA41950-1 11
SLG-100S
INSPECTIONS (検査)
1. Required Equipment 1. 治具
High-sensitivity AC voltmeter (level meter) 高感度交流電圧計(レベルメータ)
Storage oscilloscope ストレージオシロスコープ
Dry battery (006P) or power supply adapter (PA-009) 乾電池(006P)または、電源アダプター(PA-D09)
TUNING(調弦)
Use a tuning meter, pitch pipe, tuning fork, piano, etc., チューニングメーター、ピッチパイプ、音叉、ピアノなどを使って、
and tune the open strings to the pitches shown below. 各弦の開放音を以下の音程にチューニングします。
• If the string’s pitch is high, loosen the string until the ・ 音程が高い場合は、一度弦をゆるめて音程を少し下げた後で
string’s pitch is slightly lower than the tuning pitch, then 上げながらチューニングをします。
tune while raising the string’s pitch.
音叉などの基準音
(A3:440Hz)
を用いて、次の手順でチューニン
グをします。
Play the standard pitch “lah” (A3: 440Hz) on a tuning fork, 音叉などの基準音ラ
(A3:440Hz)
を鳴らし、それと5弦の
etc., and tune the open 5th string to the same pitch. 開放音が同じになるように、5弦をチューニングします。
Play the pitch produced by pressing the 5th string at the 5th 5弦の5フレットを押さえたときの音
(レ)
と4弦の開放音が同
fret, and tune the open 4th string to the same pitch. じになるように、4弦をチューニングします。
Play the pitch produced by pressing the 4th string at the 5th 4弦の5フレットを押さえたときの音
(ソ)
と3弦の開放音が同
fret, and tune the open 3rd string to the same pitch. じになるように、3弦をチューニングします。
Play the pitch produced by pressing the 3rd string at the 4th 3弦の4フレットを押さえたときの音
(シ)
と2弦の開放音が同
fret, and tune the open 2nd string to the same pitch. じになるように、2弦をチューニングします。
Play the pitch produced by pressing the 2nd string at the 5th 2弦の5フレットを押さえたときの音
(ミ)
と1弦の開放音が同
fret, and tune the open 1st string to the same pitch. じになるように、1弦をチューニングします。
Play the pitch produced by pressing the 6th string at the 5th 6弦の5フレットを押さえたときの音
(ラ)
と5弦の開放音が同
fret, and tune the pitch at the 5th fret of the 6th string to the pitch じになるように、6弦をチューニングします。
produced by the open 5th string.
1F 2F 3F 4F 5F
Open 1st String's Pitch: E(1弦開放:E(ミ))
Open 2 String's Pitch: B(2弦開放:B(シ))
nd
13
SLG-100S
14 to Pickup (LR-Baggs)
PUP2
VOLUME
SRAM 256K
OP AMP
PHONES
OP AMP
DSP
Note
SYSTEM RESET (注)
OP AMP
SYSTEM RESET OP AMP
LINE OUT
OP AMP
AUX IN
OP AMP
BASS
REVERB OFF/1/2
REGULATOR +8V
OP AMP REGULATOR +5V
BATTERY
(+9V)
SYSTEM RESET
NJU7202U50(X0150A00) NJM78L08UA(XN000A00)
REGULATOR +5V REGULATOR +8V
POWER Lamp
Green
1 1
2 2
3 3
1: COMMON 1: OUTPUT
2: INPUT 2: COMMON
3: OUTPUT 3: INPUT
WARNING
Components having special characteristics are marked and must be replaced with parts having
specification equal to those originally installed.
印の部品は、安全を維持するために重要な部品です。交換する場合は、安全のために必ず指定の部品をご
使用下さい。
OVERALL ASSEMBLY(総組立)
F05
F06
E01
F04
Panel assembly: See page 4.
(パネルAss'y)
E04
E26
E27
E14 Panel holder assembly
E01 F01 (パネルホルダー集成)
E12
E09
E13 E11 E10
A01 F01a
D04 F02
F01d
F01b
D01 E15 F01e
E19
E17 F01c
E18
D05
F01d
F03
D03 F07
E22
E20
E08 E05
D04 E21
D07
E06 E23
E25
E07 D08
D02 E24
D05 E20
E21 D06
E19
E17 E22
E18 E16
2
SLG-100S
Accessories(付属品)
H01 AC Adaptor (ACアダプタ) H02 Stereo Earphones (ステレオインナーフォン) H04 Soft Case (ソフトケース)
ACCESSORIES 付 属 品
H01 V8285200 AC Adaptor PA-D09 J A C ア ダ プ タ J 05
H01 V8285300 AC Adaptor PA-D09 UL A C ア ダ プ タ U,C 05
H01 V8285400 AC Adaptor PA-D09 CE A C ア ダ プ タ H 05
H02 QC667400 Stereo Earphones ステレオインナーフォン 08
* H03 QA406600 Accessory Unit G-10 付属品ユニット(G−10) 1set
H03a AA821010 Wrench #4 六 角 レ ン チ
H04 QC666900 Soft Case ソ フ ト ケ ー ス 18
: New Parts RANK: Japan only
3
SLG-100S
13
16
4
1
6
15
16
12 18
16
5
14
7
11
19
10
9
18
9a
17
16
4
SLG-100S
5
SLG-100S
6
SLG-100S
7
SLG-100S