Documente Academic
Documente Profesional
Documente Cultură
JUL 14 2017
check feature
system setup / others / sw checking
if you change the database, you should re-enable this feature to have
sw update checking.
###################################################################################
########################
Features:
v0071.0417
- new option Portal Cinema
- Beinliga HD 1, 2 & 3,4,5,6,7,8 and BeinMAX 4,5,6,7,8,9 & 10 (Astra 19�).
- Support forM.PARTIDAZO HD & SD.
- Support for MOVISTAR F1 + MOTOGP channels (Astra 19�).
- Support for Canal+France
- Support for porn channels, Red Light and Hustler (Hotbird) and more.
- Support for TAQUILLAS and TAQUILLA X (weekends).
- Support for TIVUSAT channels (Hotbird).
- Support for SRG_SSR (Hotbird).
- Support for HD+ (Astra 19�)
###################################################################################
#########################
FAVOURITES LISTS
###################################################################################
#########################
Use good quality FLASH disk with best read/write performace to avoid damage STB,
formatted at FAT32 file system and totally erased device. Copy the ".abs" file on
to the root (/).
IMPORTANT: Disconnect STB from INTERNET and SAT signal during upgrade.
TIKS is already ENABLED by default, so if you are comming from a OFFICIAL SW but
you have problems with it press MENU --> CONFIGURATION --> INFORMATION --> and
press "7777" to enable the hidden menu. TIKS has to be ENABLED only. You have to
configure your network by WIFI dongle or Ethernet cable, (if USB WIFI dongle is
connected but not in use because you want to use Ethernet cable you have to DISABLE
WIFI it first).
UPGRADE PROCESS:
1.- Extract ".abs" file into root folder (/) using a Flash disk device.
2.- Insert USB disk on "USB" port slot.
3.- Go to TOOLS option inside menu, then select UPGRADE BY USB option. Select USB
drive.
4.- Select "FW" update file (*.abs), press RED button (upgrade), and select "Full
Upgrade". Wait until SW will be upgraded!!!
5.- Wait until RS8100HD reboots, dont touch any remote commander key.
COMMON OPTIONS:
MENU --> CONFIGURATION --> INFORMATION --> press "7777" (TIKS, NewCamd Client,
NewCamd Server, CCCAM).
INFO:
if you change the database, you should re-enable this feature to have
sw update checking.
Full Upgrade --> "ALL FLASH" mode, maincode (firmware) + user data base.
Normal Upgrade --> Only maincode update (firmware), existing user data base will be
preserved.
Userdb --> Update only the user data base contained on that .abs file.
Backup (GREEN button) --> To make a backup of your existing maincode + user data
(AllCode).