Documente Academic
Documente Profesional
Documente Cultură
28
20:06:40 awplus-1 VCS[771]: Member 1 (e01a.ea3f.dca2) has become the Active Master
hsl
imiproxyd
....
done!
awplus>
awplus>
awplus>ena
awplus#conf t
awplus(config)#int vlan1
awplus(config-if)#no shutdown
awplus(config-if)#exit
awplus(config)#exit
awplus#
awplus#ping 192.168.2.5
Password:
awplus>ena
awplus#show run
service password-encryption
no banner motd
service ssh
!
no service telnet
service http
no clock timezone
snmp-server
ip domain-lookup
no service dhcp-server
no ip multicast-routing
service power-inline
lacp global-passive-mode enable
interface port1.0.1-1.0.26
switchport
interface port1.0.27-1.0.28
stackport
interface vlan1
ip address 192.168.2.6/24
ipv6 enable
ip dhcp-client vendor-identifying-class
line con 0
line vty 0 4
end
awplus#conf t
awplus(config)#int port1.0.25
awplus(config)#exit
awplus#ena
awplus#conf t
awplus(config)#vlan database
awplus(config-vlan)#exit
(u)-Untagged, (t)-Tagged
port1.0.10(u) port1.0.11(u)
port1.0.12(u) port1.0.13(u)
port1.0.14(u) port1.0.15(u)
port1.0.16(u) port1.0.17(u)
port1.0.18(u) port1.0.19(u)
port1.0.20(u) port1.0.21(u)
port1.0.22(u) port1.0.23(u)
port1.0.24(u) port1.0.25(u)
port1.0.26(u)
awplus#
awplus#conf t
awplus(config)#int 1.0.1
awplus#ena
awplus#conf t
awplus(config)#int port1.0.1
awplus(config-if)#int port1.0.2
awplus(config-if)#int port1.0.3
awplus(config-if)#int port1.0.4
awplus(config-if)#int port1.0.5
awplus(config-if)#int port1.0.6
awplus(config-if)#int port1.0.7
awplus(config-if)#int port1.0.8
awplus(config-if)#exit
awplus(config)#exit
awplus#wr
Building configuration...
[OK]
awplus#ena
awplus#show vlan brie
(u)-Untagged, (t)-Tagged
port1.0.10(u) port1.0.11(u)
port1.0.12(u) port1.0.13(u)
port1.0.14(u) port1.0.15(u)
port1.0.16(u) port1.0.17(u)
port1.0.18(u) port1.0.19(u)
port1.0.20(u) port1.0.21(u)
port1.0.22(u) port1.0.23(u)
port1.0.24(u) port1.0.25(u)
port1.0.26(u)
awplus#
awplus#conf t
awplus(config)#exit
awplus#vlan dat
awplus#conf t
awplus(config-vlan)#no vlan 3
awplus(config-vlan)#exit
awplus(config-if)#exit
awplus(config)#exit
awplus#show int
Interface port1.0.1
Scope: both
Thrash-limiting
<UP,BROADCAST,RUNNING,MULTICAST>
output packets 2530, bytes 237662, multicast packets 821, broadcast packets
267
Scope: both
Thrash-limiting
<UP,BROADCAST,RUNNING,MULTICAST>
output packets 2528, bytes 235974, multicast packets 819, broadcast packets
267
Interface port1.0.3
Scope: both
Thrash-limiting
<UP,BROADCAST,RUNNING,MULTICAST>
SNMP link-status traps: Disabled
output packets 2530, bytes 237662, multicast packets 821, broadcast packets
267
Interface port1.0.4
Scope: both
Thrash-limiting
<UP,BROADCAST,RUNNING,MULTICAST>
output packets 2526, bytes 235998, multicast packets 815, broadcast packets
269
Interface port1.0.5
Scope: both
Thrash-limiting
<UP,BROADCAST,RUNNING,MULTICAST>
output packets 2509, bytes 230645, multicast packets 803, broadcast packets
264
Interface port1.0.6
Scope: both
Thrash-limiting
<UP,BROADCAST,RUNNING,MULTICAST>
output packets 2529, bytes 237598, multicast packets 821, broadcast packets
266
Interface port1.0.7
Scope: both
Thrash-limiting
<UP,BROADCAST,RUNNING,MULTICAST>
output packets 2528, bytes 237534, multicast packets 820, broadcast packets
266
Interface port1.0.8
Scope: both
Link is UP, administrative state is UP
Thrash-limiting
<UP,BROADCAST,RUNNING,MULTICAST>
output packets 2523, bytes 229506, multicast packets 812, broadcast packets
269
Interface port1.0.9
Scope: both
Thrash-limiting
<UP,BROADCAST,MULTICAST>
Interface port1.0.10
Scope: both
Thrash-limiting
<UP,BROADCAST,MULTICAST>
Interface port1.0.11
Scope: both
Thrash-limiting
<UP,BROADCAST,MULTICAST>
Interface port1.0.12
Scope: both
Thrash-limiting
<UP,BROADCAST,MULTICAST>
Interface port1.0.13
Scope: both
Thrash-limiting
Password:
interface port1.0.2
switchport
interface port1.0.28
stackport
interface port1.0.28
stackport
awplus(config-if)#
interface port1.0.28
stackport
!
awplus(config)#interface port
awplus(config)#interface port1.0.28
% port1.0.28 is currently configured as a stack-port. Use caution when altering its config
Password:
awplus>ena
awplus#conf t
awplus(config)#
awplus(config)#
awplus(config)#int port1.0.28
% port1.0.28 is currently configured as a stack-port. Use caution when altering its config
awplus(config-if)#speed ?
awplus(config-if)#int port1.0.25
awplus(config-if)#speed 10000
awplus(config-if)#speed 1000
awplus(config-if)#speed auto
awplus(config-if)#exit
Password:
awplus>
awplus>enable
awplus#conf t
Warning: Stacking will stay disabled after "erase factory-default" or "atmf cleanup" execution
% stackports cannot be reconfigured until after the config has been saved and the device has been
rebooted
interface port1.0.28
switchport
awplus(config)#interface port1.0.28
% port1.0.28 is currently configured as a stack-port. Use caution when altering its config
awplus(config-if)#exit
awplus(config)#interface port1.0.26
interface port1.0.26
switchport
awplus(config-if)#exit
awplus(config)#interface swi
awplus(config)#interface port1.0.28
% port1.0.28 is currently configured as a stack-port. Use caution when altering its config
awplus(config-if)#no
flowcontrol gvrp ip
awplus#reboot
Machine Restart
Loading flash:GS900-5.4.8-0.2.rel...
Verifying release... OK
Booting...
Starting base/first... [ OK ]
______________ ____
/\ \ / /______\
/ \ \_ __/ /| ______ |
/ \| | / | ______ |
/ \\ // \ ____ /
/______/\____\ \/ /____________/
Starting base/dbus... [ OK ]
Starting base/linux... [ OK ]
Starting base/syslog... [ OK ]
Starting base/loopback... [ OK ]
Starting base/poe_done... [ OK ]
Starting base/portmapper... [ OK ]
Starting base/modules... [ OK ]
Starting base/reboot-stability... [ OK ]
Starting base/apteryx... [ OK ]
Starting base/crond... [ OK ]
Starting base/appmond... [ OK ]
Starting base/clockcheck... [ OK ]
Starting base/inet... [ OK ]
Starting hardware/early_host_info... [ OK ]
Starting base/eventwatch... [ OK ]
Starting base/alfred... [ OK ]
Starting network/kermond... [ OK ]
Starting base/apteryx-sync... [ OK ]
Starting base/logconf... [ OK ]
Starting hardware/plugman... [ OK ]
Starting hardware/openhpi... [ OK ]
Starting hardware/timeout... [ OK ]
Starting hardware/hardware-done... [ OK ]
Starting network/poefw... [ OK ]
Starting base/external-media... [ OK ]
Received event poefw.done
Starting network/startup... [ OK ]
Starting network/licd... [ OK ]
Starting network/stackd... [ OK ]
Starting network/election.timeout... [ OK ]
Starting network/corosync... [ OK ]
Initializing HA processes:
ospfd
imiproxyd
....
done!
fPassword:
awplus>en
awplus#sh running-config
service password-encryption
no banner motd
service ssh
no service telnet
service http
no clock timezone
!
snmp-server
no stack 1 enable
ip domain-lookup
no service dhcp-server
no ip multicast-routing
service power-inline
vlan database
interface port1.0.1-1.0.28
switchport
interface vlan1
ip address 192.168.2.6/24
ipv6 enable
ip dhcp-client vendor-identifying-class
line con 0
line vty 0 4
end
awplus#conf t
interface port1.0.28
switchport
awplus(config)#end
awplus#show running-config
!
service password-encryption
no banner motd
service ssh
no service telnet
service http
no clock timezone
snmp-server
no stack 1 enable
!
!
ip domain-lookup
no service dhcp-server
no ip multicast-routing
service power-inline
vlan database
interface port1.0.1-1.0.28
switchport
interface vlan1
ip address 192.168.2.6/24
ipv6 enable
ip dhcp-client vendor-identifying-class
line con 0
line vty 0 4
end
awplus#
awplus#
awplus#
awplus#
awplus#
awplus#show running-config
service password-encryption
no banner motd
service ssh
no service telnet
!
service http
no clock timezone
snmp-server
no stack 1 enable
ip domain-lookup
no service dhcp-server
no ip multicast-routing
service power-inline
vlan database
interface port1.0.1-1.0.28
switchport
interface vlan1
ip address 192.168.2.6/24
ipv6 enable
ip dhcp-client vendor-identifying-class
line con 0
line vty 0 4
end