0 evaluări0% au considerat acest document util (0 voturi)
196 vizualizări2 pagini
This document provides design details for sizing a counter-flow induced draft cooling tower. It specifies key parameters like the wet bulb temperature of 28.5°C, an inlet temperature of 42°C and outlet of 32°C, with a design approach of 3.5°C. The total required cooling capacity is calculated to be 2400 cubic meters per hour based on the needs of the condenser, oil cooler, alternator and other auxiliary equipment. The cooling tower will have 3 cells of 800 cubic meters per hour capacity each. Materials of construction include reinforced concrete, PVC, polypropylene, galvanized steel and others.
This document provides design details for sizing a counter-flow induced draft cooling tower. It specifies key parameters like the wet bulb temperature of 28.5°C, an inlet temperature of 42°C and outlet of 32°C, with a design approach of 3.5°C. The total required cooling capacity is calculated to be 2400 cubic meters per hour based on the needs of the condenser, oil cooler, alternator and other auxiliary equipment. The cooling tower will have 3 cells of 800 cubic meters per hour capacity each. Materials of construction include reinforced concrete, PVC, polypropylene, galvanized steel and others.
This document provides design details for sizing a counter-flow induced draft cooling tower. It specifies key parameters like the wet bulb temperature of 28.5°C, an inlet temperature of 42°C and outlet of 32°C, with a design approach of 3.5°C. The total required cooling capacity is calculated to be 2400 cubic meters per hour based on the needs of the condenser, oil cooler, alternator and other auxiliary equipment. The cooling tower will have 3 cells of 800 cubic meters per hour capacity each. Materials of construction include reinforced concrete, PVC, polypropylene, galvanized steel and others.