Documente Academic
Documente Profesional
Documente Cultură
Brochure
Bosch Rexroth AG | Pneumatics
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics
Accessories
Single subbase 49
▶ standard: ISO 15407-1 ▶ Frame size: 26 mm ▶ compressed air connection output: G
1/4 - NPTF 1/4-18 ▶ ATEX certified
Blanking plate 55
▶ standard: ISO 15407-1 ▶ Frame size: 26 mm ▶ Single base plate principle
Separator 56
▶ ISO 15407-1, 26 mm
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics
Transition plate 57
▶ standard: ISO 15407-1 ▶ Can be assembled into blocks ▶ Reversed pressure supply
permissible ▶ ATEX certified
Pilot valve 66
▶ plate connection ▶ Electr. connection: Plug, ISO 15217, form C ▶ manual override:
without detent, with detent
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics
Dimensions
00106712_a
A B C D E
85 51.5 103 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
10 Bosch Rexroth AG | Pneumatics
Dimensions
00106712
A B C D E
85 51.5 103 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 11
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
12 Bosch Rexroth AG | Pneumatics
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 13
Dimensions
00106712_a
A B C D E
85 51.5 103 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
14 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 15
00106707
1) Control pressure
2) Operating pressure
Dimensions
00106712_a
A B C D E
85 51.5 103 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
16 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
with differential piston, signal 14 has priority
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 17
00106707
1) Control pressure
2) Operating pressure
Dimensions
00106712_a
A B C D E
85 51.5 103 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
18 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 19
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
20 Bosch Rexroth AG | Pneumatics
Dimensions
00106712
A B C D E
85 51.5 103 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 21
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
22 Bosch Rexroth AG | Pneumatics
00106707
1) Control pressure
2) Operating pressure
Dimensions
00106712
A B C D E
85 51.5 103 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 23
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
with differential piston, signal 14 has priority
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
24 Bosch Rexroth AG | Pneumatics
00106707
1) Control pressure
2) Operating pressure
Dimensions
00106712
A B C D E
85 51.5 103 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 25
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
26 Bosch Rexroth AG | Pneumatics
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 27
Dimensions
00106712_b
A B C D E
85 72 123 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
28 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 29
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
30 Bosch Rexroth AG | Pneumatics
Dimensions
00106712_c
A B C D E
85 72 123 42 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 31
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
4) Basic valve without coil
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
32 Bosch Rexroth AG | Pneumatics
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
4) Basic valve without coil
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 33
Dimensions
00106787
A B C D E F G
91 64 51.5 103 42 142 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
34 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
MO = Manual override
1) External control pressure: see diagram
2) Low power consumption
3) Pilot: internal
4) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 35
MO = Manual override
1) External control pressure: see diagram
2) Low power consumption
3) Pilot: internal
4) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
36 Bosch Rexroth AG | Pneumatics
Dimensions
00106787
A B C D E F G
91 64 51.5 103 42 142 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 37
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
38 Bosch Rexroth AG | Pneumatics
24 V - - 12 0.26 3) 0820051502
24 V - - 12 0.26 1); 3) 0820051503
- 24 V 24 V 1000 1 / 10 1 / 10 12 - 0.26 3) 0820051504
- 230 V 230 V 12 0.26 3) 0820051501
- - - - 0.21 3); 5) 0820051992
2); 4);
- -0.95 / 1 / 10 0.21 0820051982
- - 1000 - - 5)
10
24 V 1.5 / 10 0.26 2); 4) 0820051516
24 V - - 3) 0820051026
24 V - - 1); 3) 0820051027
- 24 V 24 V 1000 2.5 / 10 2.5 / 10 19 40 0.24 3) 0820051028
- 110 V 110 V 3) 0820051029
- 230 V 230 V 3) 0820051025
-0.95 /
24 V - - 1000 2.5 / 10 19 40 0.24 2); 4) 0820051030
10
MO = Manual override
1) Low power consumption
2) External control pressure: see diagram
3) Pilot: internal
4) Pilot: external
5) Basic valve without coil
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 39
00106707
1) Control pressure
2) Operating pressure
Dimensions
00106787
A B C D E F G
91 64 51.5 103 42 142 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
40 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 41
-0.95 /
24 V - - 1000 2.5 / 10 19 40 0.24 2); 4) 0820051080
10
2); 4);
- -0.95 / 1 / 10 0.21 0820051982
- - 1000 - - 5)
10
24 V 1.5 / 10 0.26 2); 4) 0820051566
MO = Manual override
1) Low power consumption
2) External control pressure: see diagram
3) Pilot: internal
4) Pilot: external
5) Basic valve without coil
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
42 Bosch Rexroth AG | Pneumatics
00106707
1) Control pressure
2) Operating pressure
Dimensions
00106787
A B C D E F G
91 64 51.5 103 42 142 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 43
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
44 Bosch Rexroth AG | Pneumatics
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 45
Dimensions
00106787_b
A B C D E F G
91 64 72 123 42 142 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
46 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 47
MO = Manual override
1) External control pressure: see diagram
2) Pilot: internal
3) Pilot: external
Nominal flow Qn at 6 bar and Δp = 1 bar
00106707
1) Control pressure
2) Operating pressure
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
48 Bosch Rexroth AG | Pneumatics
Dimensions
00106787_b
A B C D E F G
91 64 72 123 42 142 26
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 49
Single subbase
▶ standard: ISO 15407-1 ▶ Frame size: 26 mm ▶ compressed air connection output: G 1/4 - NPTF 1/4-18 ▶ ATEX
certified
ATEX II 3G X
Ambient temperature min./max. -15°C / +70°C
Medium Compressed air
Working pressure min./max. -0.95 bar / 16 bar
Direction of pneumatic port (1) On the side
Direction of pneumatic port (R) On the side
Direction of pneumatic port (X) On the side
00106821
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Dimensions
00106791
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
50 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 51
Dimensions
00106792_c
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
52 Bosch Rexroth AG | Pneumatics
Dimensions
00106792_a
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 53
ATEX II 3G X
Ambient temperature min./max. -15°C / +70°C
Medium temperature min./max. -15°C / +70°C
Medium Compressed air
Working pressure min./max. -0.95 bar / 16 bar
Grid dimension 28 mm
Mounting screw with hexagon socket
Direction of pneumatic port (1) upwards
Direction of pneumatic port (3,5) upwards
Materials:
00103901
Subbase Aluminum
Seals Acrylonitrile Butadiene Rubber
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Dimensions
00106793
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
54 Bosch Rexroth AG | Pneumatics
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Dimensions
00106794
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 55
Blanking plate
▶ standard: ISO 15407-1 ▶ Frame size: 26 mm ▶ Single base plate principle
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Dimensions
00106795
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
56 Bosch Rexroth AG | Pneumatics
Separator
▶ ISO 15407-1, 26 mm
00103291
00106796
00106828
00106797
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 57
Transition plate
▶ standard: ISO 15407-1 ▶ Can be assembled into blocks ▶ Reversed pressure supply permissible ▶ ATEX
certified
ATEX II 3G X
Ambient temperature min./max. -15°C / +70°C
Medium temperature min./max. -15°C / +80°C
Medium Compressed air
Working pressure min./max. -0.95 bar / 16 bar
Mounting screw with hexagon socket
Exhaust (3,5) unrestricted exhaust
Ports separated
Materials:
Subbase Aluminum
00106829
Seals Acrylonitrile Butadiene Rubber
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
58 Bosch Rexroth AG | Pneumatics
Dimensions
00106798
Frame size Working pressure Adjustment range Weight Note Part No.
min./max. min./max.
[bar] [bar] [kg]
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 59
Frame size Working pressure Adjustment range Weight Note Part No.
min./max. min./max.
[bar] [bar] [kg]
- 26 mm - - - 1) 1821015091
1) Base plate gasket
Scope of delivery incl. seal and mounting screws
with pressure gauge
Fig. 1
00111953
p2 [bar]
p1 = 8 bar
8
p1 = 10 bar
6,3
6
5,3
0
0 180 360 540 720 900
Q n [l/min]
00106799
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
60 Bosch Rexroth AG | Pneumatics
Fig. 2
00111955
p2 [bar]
p1 = 8 bar
8
p1 = 10 bar
6,3
6
5,3
0
0 180 360 540 720 900
Q n [l/min]
00106799
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 61
Fig. 3
00111956
00106800
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
62 Bosch Rexroth AG | Pneumatics
Compressed air connection Adjustment Nomi- Control ele- Weight Part No.
range nal ment
min./max. flow
Dimensions
D575_050
Part No. A
5750020500 76.7
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 63
Part No. A
5750020510 76.7
5750020530 60.2
R412003719 76.7
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
64 Bosch Rexroth AG | Pneumatics
Dimensions
D575_050
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG | Pneumatics 65
Compressed Nominal Application Display Operating Scale value Class Part No.
air connection diameter range pressure
[mm] [bar] [bar] [bar]
Dimensions
4 6
50 100
2 8
22
140
0 psi 10
bar
67
26
3) 1) 2)
96
90
60
64
00133985
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
66 Bosch Rexroth AG | Pneumatics
Pilot valve
▶ plate connection ▶ Electr. connection: Plug, ISO 15217, form C ▶ manual override: without detent, with detent
00129902
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of air pressure must remain constant during the life cycle.
■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for detailed information
Pneumatics catalog, online PDF, as of 2009-08-07, © Bosch Rexroth AG, subject to change
Bosch Rexroth AG
Pneumatics
Ulmer Straße 4
D - 30880 Laatzen
Phone +49 511 2136 - 0
Fax +49 511 2136 - 2 69
sales-pneumatics@boschrexroth.de
www.boschrexroth.com/pneumatics
Your contact:
Canada U.S.A.
Bosch Rexroth Canada Corp. Bosch Rexroth Corp.
3426 Mainway Drive 1953 Mercer Road
Burlington, Ontario L7M 1A8 Lexington, KY 40511-1021
Tel. +1 905 335-5511 Kentucky
Fax +1 905 335-4184 Tel. +1 859 254-8031
Fax +1 859 254-4188
Australia
Bosch Rexroth Pty. Ltd. Great Britain
3 Valediction Road Bosch Rexroth Ltd.
Kings Park NSW 2148 Broadway Lane
Sydney South Cerney
Tel. +61 2 9831-7788 Cirencester, GL7 5UH
Fax +61 2 9831-5553 Gloucestershire
Tel. +44 1285 86-3000
Fax +44 1285 86-3003
further contacts:
www.boschrexroth.com/addresses
Subject to modifications.
Online-PDF
07-08-2009