Documente Academic
Documente Profesional
Documente Cultură
Description: direct light luminaire for LED source, suitable for recessed installation into:
- “clip-in” false ceilings with 600x600mm, 300x1200mm or 600x1200mm metal tiles with
concealed structure;
- gypsum false ceilings through steel fixing brackets, included.
Body: sheet-steel body powder coated with white (RAL 9003) epoxy powders
thermosetting at 180°C, after degreasing, phosphatizing and washing treatment.
The luminaire is equipped with inside gaskets and guarantees the total protection IP65
against dust and water splashes in the optical hollow; protection degree IP20 in the
recessed part; it is particularly indicated to be used in chemical laboratories, hospital
rooms, operating theatres, clean rooms or anywhere a protection is needed.
The anchoring to the concrete ceiling is recommended (suspension system not included).
Wiring: feeding 220-240V – 50/60Hz with rigid cable (section: 0,50 mm²) and PVC-HT
sheathing resistant at 90°C according to CEI 20-20 directives.
2P+E terminal board with maximum wire section allowed 2,5 mm².
Insulation class I. It is suitable to be installed on normally flammable surfaces.
• LED-F (DALI) version with digital dimmable electronic driver, standard DALI, included,
and fused terminal block. Photometric distribution
• LED-F version with electronic driver, fix output (ON/OFF), included, and fused
terminal block is available upon request.
• LED-FE and LED-FE (DALI) version with emergency pack suitable to have 1 hour of
autonomy on 1 LED module is available upon request (3 hours of autonomy available
upon request)
Luminous source:
High efficiency LED modules with CRI>80 or CRI>90, colour temperature 3000K and
4000K (LED diodes are selected 3 MacAdam ellipses to ensure a perfect uniform
chromaticity), duration > 50000 hours L80/B10 at Ta=25°C.
ATENA LUX 30020 Gruaro (VE) – via A. De Gasperi, 52/A tel. 0039/0421/760100 r.a. – fax 0039/0421/760225 www.atenalux.com - info @atenalux.com Pag. 1/2
ATENA LUX reserve the right to change dimensions and specifications of luminaires without prior notice.
TECHNICAL SPECIFICATIONS Doc. STP.
ATENA LUX 30020 Gruaro (VE) – via A. De Gasperi, 52/A tel. 0039/0421/760100 r.a. – fax 0039/0421/760225 www.atenalux.com - info @atenalux.com Pag. 2/2
ATENA LUX reserve the right to change dimensions and specifications of luminaires without prior notice.