Documente Academic
Documente Profesional
Documente Cultură
Water boiling,
and water heating solutions...
UK market leaders
in water heating
and water boiling
for over 45 years.
Water Boiling
Selector
Sensaboil SB2 Corvette
Auto fill • •
Plastic tank • •
Stainless steel tank •
Wall mounted • • •
White finish • • •
Stainless steel finish •
Water Heating
Selector
Powerstream MW/ UWS Flatback WS7 Powerstream Powerstream Instant Manual Auto AV3
Ascari EW Cistern Eco I3V
Central heating •
Instantaneous • • • •
Multple outlets • • • • •
Single outlet • • •
Oversink mounting • • • •
Undersink mounting • • • •
Unvented • • • • •
Vented • • •
What is a vented system? What is an unvented system?
A vented system has a cold water header tank directly feeding the hot An unvented system has the hot water cylinder fed directly from the
water cylinder, and are vented through an open pipe within the system. rising cold main. This system has a series of pressure valves and is not
vented through a vent pipe.
2 3
Mark Of Approval
Our products are tested and retested to ensure that they are of the
upmost quality and in line with their specification before we make them
ready for distribution. We only put our name on products when they have
meet the relevant approvals and the high standard we insist upon.
You can also find product information and contact us through our website at www.redring.co.uk
4 5
refreshed
Automatic beverage water boilers
Sensaboil Automatic
• Auto fill and heat
Key Features
20 34 51
346mm
• Water feed hose length 2m
497mm
• Maximum inlet water pressure: 10 bar
• Voltage supply 230/240V 50-60Hz
• Boil dry thermal cut-out
206*
• 3kW element for rapid heat up
cups
Product Range
Available in 3, 5 and 7.5L tank capacities
Product Ref. Finish Model Cat No. Product Ref. Finish Model Cat No.
Sensaboil 3L White SB3W 22672801 Sensaboil 5L Stainless Steel SB5S 22673805
1 cup = 167ml*
per hour Sensaboil 3L Stainless Steel SB3S 22672805 Sensaboil 7.5L White SB7W 22674801
Sensaboil 5L White SB5W 22673801 Sensaboil 7.5L Stainless Steel SB7S 22674805
6 7
SB² Corvette
Beverage water boilers Wall kettles
Key Features Technical Specification Dimensions Key Features Technical Specification Dimensions
• 2.5 litre tank capacity • kW loading at 240V: 2.2kW • Quick and easy installation • kW loading at 240V: 2.2kW
• Scale trap feature • Wall mounted with rear or bottom 285mm 220mm • Easy to read water level indicator • Electrical connection via a fused spur 206mm 189mm
• 2 pipe entry points for easy installation plumbing connection via a standard • Optional Plumbing-In Kit allows • Water entry via filler hose supplied,
• Easy to turn dial to dispense water 15mm compression fitting permanent supply through cold water optional plumbing kit, or manually
• On/standby push button • Fitted cable length: 1m mains connection • Unit can be positioned over a sink or
• Power on, unit full and temperature • Overflow/vent connection discharges to • Supplied with 1m detachable hose for suitable outlet
324mm
256mm
ready LED indicators a suitable drain temporary connection to a tap • Fitted cable length: 1m
352mm
• 2 year UK guarantee • Maximum inlet water pressure 10 bar • Stainless steel base plate • Voltage supply: 230/240V 50-60Hz
• Voltage supply: 230/240V 50-60Hz • 2 year UK guarantee • Supplied with cable tidy, wall mounting
plate, wall fixing kit and 1m filler hose
174mm
8 9
CENTRAL LED
HEATING 206 CUPS INDICATOR
3kW MULTIPLE
VENTED UNDERSINK ECO
RATING OUTLETS
Key Features Technical Specification Dimensions Key Features Technical Specification Dimensions MW/EW
CENTRAL LED
HEATING 206 CUPS INDICATOR
• Integral circulation pump and expansion • Maximum power 4-12kW 405mm 280mm • Balanced supply of hot and cold water • kW loading at 240V: 3kW
10L: 254mm
vessel • Includes 8 litre expansion vessel, 3 bar • Minimal heat loss and energy savings - • Replaceable magnesium sacrificial anode 360mm 15L: 300mm
• Choice of 4, 6, 8, 10 or 12kW on pressure relief valve and 3 speed pump short pipe runs and superior insulation • Inlet/outlet connections 15mm (½” BSP)
installation for quick and easy install • Adjustable thermostat to 70°C • Fixing pack with wall mounting bracket
• Ideal for well insulated properties of up • 7 segment digital displays of • Compact for undersink mounting supplied
to 80m² temperature and pressure • Remote siting possible • Long life Incoloy elements
• 5 litre water storage for rapid response • Frost protection 5°C minimum temp MULTIPLE • Over temperature safety cut-out • Needs to discharge to a drain
620mm
ECO OUTLETS
• Stainless steel elements • Operating pressure 0.5 bar - 3 bar • EW supplied as unit only. Safety • Operating pressure 1 bar - 12 bar (above
360mm
• 3 year UK guarantee on tank and 2 year • Top or bottom cable entry protection devices will be required 6 bar use cold water pack)
on components relevant to the installation. • Foamed polyurethane insulation
• Vitreous enamelled steel water container
10 11
• Effective and fast mains fed unvented water • Wall mounted installation ideal for small
storage heater commercial kitchens, bathrooms,
• Small and compact enables undersink installation cloakrooms and canteens
3kW
where space is limited 3kW
• Compact, multi-outlet water heating
VENTED UNDERSINK VENTED UNDERSINK
• Unique ohmic resistance for reinforced protection
RATING RATING solution
against corrosion • 1 adjustable thermostat and 1 high limit
• High efficiency water inlet thermostat for extra control and safety
• Cold water cistern incorporated within unit
470mm 210mm
Key Features Technical Specification 262mm ø 255mm Key Features Technical Specification
100mm
CENTRAL LED
Dimensions 25L
• High quality enamel lined tank • kW loading at 240V: 2.2kW HEATING 206 CUPS• Ideal for replacement (overflow and cold
INDICATOR • kW loading at 240V: 3kW
• Large magnesium anode • kW loading at 230V: 2kW feed can be connected on the left or • ½” BSP cold water and 22mm
• CFC-free high density insulation foam • Weight when full 10L: 17.5kg right hand side) compression fitting hot water
705mm
• Expansion relief valve • Weight when full 15L: 25kg • 50 to 80°C thermostatic control range connections
456mm
• Externally adjustable rod type • Operating pressure: 1.5 bar - 6 bar • Drain connection supplied and fitted • High density foam insulation
thermostat with integrated security • 2 dielectric union • Overheat protection • Corrosion proofed steel, with enamel
• Indicator light when operating • Sheathed copper immersion element • Long life Incoloy sheathed elements finish outer casing
• 1 year UK guarantee • Electrical connection 230-240V AC MULTIPLE • 2 year UK guarantee • Copper sheathed water vessel with
ECO OUTLETS
3kW (13 Amps) is required brazed seams
Dimensions 10L
• Operating pressure 0.7 bar - 10 bar
Product Range 294mm ø 287mm 600mm 320mm
Dimensions 50L
UWS 10 Litre White UWS10 47784570
Product Ref. Finish Model Cat No.
UWS 15 Litre White UWS15 47784571
Optional Cold Water Pack CWP 87783101 Cistern 25 Litre White CT25 26786401
750mm
496mm
WS7 Powerstream E
7L vented water storage heaters Efficient unvented instantaneous
water heaters
• An economical solution to provide stored hot water
• Delivers instant hot water at point of use
• EcoT model contains an integral timer
• Eliminates the need for a centrally located
• Minimal standing heat loss as they are installed at
hot water cylinder and long pipe runs
point of use
• External power selection
• 1kW model ideal for energy saving and 3kW model
• Ideal for hand basin supply in commercial
ideal for fast recovery and heat time
washrooms and residential applications
3kW
VENTED UNDERSINK RATING
CENTRAL LED
HEATING 206 CUPS INDICATOR
Key Features Technical Specification Dimensions Key Features Technical Specification Dimensions
MULTIPLE
ECO OUTLETS
• 7 litre capacity, point of use • kW loading at 240V: 1 or 3kW 278mm 232mm • Eco power setting for reduced running • kW loading at 240V: 9.5 or 10.8kW
307mm 84mm
• 300mm swivel spout included • Cold water 15mm compression costs • Connected to the cold mains water supply
• Wall bracket and full fixing pack • Outlet ½ BSP - swivel spout connection • Ease of control with adjustable power dial • Supplied with 15mm straight shank on the
supplied supplied • User power selection options for inlet and outlet
160mm
• Can be mounted undersink using the • Restrictors supplied to optimise flow economy and seasonal performance • Allows for pipe entry from the right or
monoblock chrome-mixer accessory rate control bottom side
400mm
• Adjustable thermostat 15°C - 75ºC with • High quality impact resistant ABS cover • Removes the need for connection to • Operating pressure 1 bar - 10 bar
frost protection setting • Sheathed heating elements stored hot water • Recommended cable sizes and fuse ratings:
• Integral safety over-temperature thermal • Operating pressure 0.7 bar - 10 bar • Suitable for use with two hand basins or 9.5kW 6 - 10mm² 40 Amps 110mm
fuse • NB: we recommend the use of the one basin and one mixer shower 10.8kW 10 - 16mm² 45 Amps
• Optional tamper proof cover supplied Redring Vented Monoblock Mixer • NB: We recommend the use of the Redring
• 24 hour, 7 day programmable timer on 1/4 Turn Spray Tap
WS7-EcoT model
• 2 year UK guarantee
Product Range
3kW
UNVENTED VENTED UNDERSINK RATING
OVERSINK INSTANTANEOUS
• Direct mains supply • Sheathed heating elements • 3KW power = hot water, fast • Standard fixing kit supplied
• Small, compact shape • Operating pressure 1 bar to 10 bar • Anti-vandal spray head and swivel • Operating water pressure 0.7 – 7 bar (10-100 PSI)
• Remote fitting option • NB: We recommend the use of the 200mm stainless steel spray arm • Water pressure operated power switch
MULTIPLE
• No standing heat losses Redring 1/4 Turn Spray Tap ECO OUTLETS • 1 year guarantee • IPX4 rated
• Corrosion resistant steel backplate • •
Key Features (Auto AV3) Technical Specification (Auto AV3)
Sales Queries
Loading Calculations (excluding heat losses) Physical Constraints
Time to heat = Litres x Temp rise (°C) Length 1m = 3.28ft 1 joule = 1 watt second (Ws) If you’ve chosen your Redring product and are eager to purchase it, or
1ft = 30.8cm
water (mins)
kW loading x 14.3
1 kW hour = 3412 Btu
if you require spare parts for your unit, our Sales team will be happy to
= Gallons x Temp rise (°F) Volume 1gal = 4.54l = 860kcal help you find a local stockist. The team can be contacted on
kW loading x 5.7 = 277 cu. ins.
= 10lbs (water) 1 British Thermal = Heat required to
0844 372 7750 from 8:30 until 5:00 Monday to Friday.
kW loading = Litres x Temp rise (°C) 1litre = 0.22gals Unit (Btu) raise 1lb water
required Time (mins) x 14.3 = 1000cm3 through 1°F
= Gallons x Temp rise (°F)
= 1kg (water) = 17.6 watt mins The information you need may just be a click away….
Time (mins) x 5.7 1000l = 1m3 = 0.252kcal
Weight 1lb = 0.45kg
Performance Calculations 1kg = 2.21lbs
1 kilocalorie (kcal) = Heat required to The Redring website provides a comprehensive overview of all our
raise 1kg water
Litres per = kW loading x 14.3 through 1°C
showering products, as well as access to product manuals and
Pressure 1bar = 14.5psi = 100kN/m2
minute flow
Temp rise (°C)
1ft head of water = 0.434psi
= 4187Joules brochures. You can also find Frequently Asked Questions to look up
= 3.97Btu
Temp rise °C = kW loading x 14.3 1m head of water = 9.8kN/m2 anything you’re not sure about. Visit www.redring.co.uk for quick
Litres per min flow
Hot Water Requirements
and easy access to this information.
Temp rise °F = kW loading x 5.7
Gallons per min flow
Handwashing 1 to 2.5 litres per person (40°C)
kW loading = Litres x Temp rise(°C) Kitchen sink 2 to 7 litres per person (60°C)
You can also send us your query through the website by filling out an
required Time (mins) x 14.3 Cleaning 10 litres per day (60°C) online enquiry form at www.redring.co.uk/contacts.
Bath 60 litres per bath (60°C)
Hairdressing 10 litres per shampoo (40°C)
Dishwasher 2 litres per meal (60°C)
2.0 9 13 18 27 55 105 140 175 2.0 265
Loading Kilowatts
3.0
6 9 12 18 35 70 95 120 3.0 175 235 295
4.0
5 7 9 14 27 55 70 90 4.0 135 175 220 265
6.0
3 5 6 9 18 35 50 60 6.0
90 120 150 175 235 350 470 585
8.0
3 4 5 7 14 27 35 45 8.0
70 90 110 135 185 265 350 440
Minutes
Minutes
9.0
2 3 4 6 12 24 31 49 9.0
60 80 100 120 160 235 315 390
12.0 2 2 3 5 9 18
24 30 12.0 45 60 75 90 120 175 235 295
15.0 2 2 3 4 7 14
19 24 15.0 35 50 60 70 95 140
190 235
18 19
Redring reserves the right to alter product specification or appearance without prior notice.
All finishes in the brochure are as accurate as printing processes allow. All rights reserved.
R063