Sunteți pe pagina 1din 2

TECHNICAL QUERY Contract No. BI No. TQ No. Rev.

(TQ) xxx 10-01321 TIR-SAP357-00003 00


TQ Title Date Page
2018-11-13 1 of 2
Proposed Relays
Project Name: Response Time
3 DAYS
UPGRADE PIER FACILITIES-TANAJIB
Location: TANAJIB PORT DISTRIBUTION (NAME PLUS DISCIPLINE OR COMPANY)
End Client: SAUDI ARAMCO From: SUB-CONTRACTOR (HON)
TQ Type: Design To: CONTRACTOR (SARCO)
Discrepancies in technical documentation Copies to:
Queries of preliminary engineering assumptions and cases
Engineering clarifications and confirmations
Cost Optimization
Interpretation of specifications and standards
Queries not related to engineering (e.g., quality assurance, safety, etc.)
Other: Kind reminder on pending responses to TEQs
1. DESCRIPTION & JUSTIFICATION OF REQUEST
We proposed following relays type for IRP signals, please confirm
 G2R-2-SND (S) -24VDC
 G2R-2-SN (S) -230VAC
The above relays comply with 34-SAMSS-820 and have the following feature;
 DIN rail mountable
 Dust-tight,
 8-pin (DPDT) plug-in type.
 With Diode

2. PROPOSED SOLUTION (IF APPLICABLE)


Based on the confirmation from Archirodon, we will consider these in the PDR design.

3. TQ IMPACT
Possible delay in PDR submission, if response is delayed.

NAME SIGNATURE DATE


2018-11-13
AL-TAKEAH, HUSSAIN
Issued by:
2018-11-13
KHAN, JUNAID
Reviewed by::
2018-11-13
AQEEL, MOHAMMED
Concurred by:
4. CONTRACTOR RESPONSE

Vendor to follow Aramco Standards


SIL-3 rated relays to be used for ESD-IRP. Vendor to include in NMR.
NAME SIGNATURE DATE

Contractor’s Representative:
5. TQ CLOSURE NOTES
TECHNICAL QUERY Contract No. BI No. TQ No. Rev.
(TQ) xxx 10-01321 TIR-SAP357-00003 00
TQ Title Date Page
2018-11-13 2 of 2
Proposed Relays
Project Name: Response Time
3 DAYS
UPGRADE PIER FACILITIES-TANAJIB
Scope/ Schedule/ Cost / other Impact Yes No
Explain:
 For ESD IRP Phoenix Contact SIL-3 relays (PSR-PS22-1NO-1NC-24VDC-SC - 2702524) will be used for DO(s)
only. Datasheet is attached.
Response:Please note that ESD Relays are not complying 34-SAMSS-820 which requires suppression diodes , base plates &
atleast DPDT contacts. The model shall be forwarded to saudi Aramco for approval.
 For DCS will be G2R-2-SND (S) -24VDC for DO & G2R-2-SN (S) -230VAC for DI.
Response : Approved based on 34-SAMSS-820 compliance


 NAME SIGNATURE DATE
Engineering Manager:
Project Manager:

S-ar putea să vă placă și