Documente Academic
Documente Profesional
Documente Cultură
Thank you for purchasing the Yamaha MONTAGE Series, Music Synthesizer.
NOTICE:
- This updater is only for the MONTAGE synthesizer.
- This updater is to be used at the user's own risk.
- All User memory (Library data, User data, User sample and so on) will be
initialized by this updater. Please make sure that you have saved all User data to
a USB flash drive before performing this update.
- The unit may become inoperable if the electrical supply is interrupted while
running the updater (by disconnecting the AC cord, etc.). If this happens, run the
updater again from the first step.
- If the unit does not function after running the updater, please contact your
nearest Yamaha service center.
Updating Procedure
NOTICE:
All User memory (Library data, User data, User sample and so on) will be
initialized by this updater.
Please make sure that you save all User data to a USB flash drive before
performing this update.
Library data cannot be backed up. Please prepare the original library data.
In addition, when you load backup data, load libraries first before the user
data.
Required Items
- One USB flash drive of over 1GB capacity formatted on the MONTAGE
1. After downloading, copy the following uncompressed files to a USB flash drive
that has been formatted on the MONTAGE. No other files should be present on the USB
flash drive.
8N70OS_.PGM
3. Connect the USB flash drive prepared in step 1 to the [USB TO DEVICE] terminal
of the MONTAGE. Power on the MONTAGE while holding down the [Cursor UP] and
[UTILITY] buttons until the "YAMAHA" logo appears on screen.
4. The MONTAGE OS updater will begin with the message "Searching for the
updater..." and "MONTAGE updater *.**.*".
When the message "Finish. Please turn off." appears, turn off the MONTAGE and
remove the USB flash drive.
WARNING:
DO NOT power off or remove the USB flash drive from the MONTAGE until the "Finish.
Please turn off." message appears. If power is accidently interrupted while running
the updater (by disconnecting the AC cord, etc.), the unit may become inoperable.
If this happens, run the updater again. If the unit still does not function after
doing this, please contact your nearest Yamaha service center.
===================================================================================
====================================
Fixes and Enhancements
Fixed problems;
- Fixed a problem in which playback would continue without stopping if you switched
a Performance with received Sustain messages from external equipment in the MIDI
single channel mode.
- Fixed other minor problems.
Fixed problems;
- Fixed a problem in which an error message would appear when Device Number was set
to other than "All" and a Super Knob Control Change message was received.
- Fixed a problem in which Zone settings would not be correctly applied by
switching Performances.
- Fixed other minor problems.
Fixed problems;
- Fixed a problem in which all buttons, sliders, and knobs on the panel would not
work after power-on.
- Fixed a problem in which the Super knob would not work after power-on.
- Fixed other minor problems.
Fixed problems;
- Fixed the problem in which a user waveform would be lost when loading libraries
exceeding the sample memory size.
- Fixed the problem of long load times when loading large samples.
- Fixed the error in saving a Song as a MIDI file when the Song name contained
illegal characters.
- Fixed other minor problems.
===================================================================================
====================================
The company names and product names in this release note are the trademarks or
registered trademarks of their respective companies.
Copyright(c) 2016 Yamaha Corporation. All Rights Reserved.