Documente Academic
Documente Profesional
Documente Cultură
5620 SAM
Issue: Ed1.0
Date: 21/12/2015
Client: Indosat
Project: Indosat SAM Upgrade
Reference:
Hold-Time Enablement Creation in 5620
SAM – Method of Procedure (MOP)
TABLE OF CONTENTS
1 INTRODUCTION ............................................................................................. 2
2 LOCATION ...................................................................................................... 2
3 ASSUMPTIONS .............................................................................................. 2
4 PROCEDURES ............................................................................................... 2
4.1 Bulk Operation in SAM 12.0R7 .............................................................................. 3
4.2 Creating a Bulk Change in SAM 12.0R7................................................................ 3
4.2.1 Creating a Hold-Time Bulk Operations .............................................................. 3
4.2.2 Enabling a Hold-Time Bulk Operation ............................................................... 4
4.2 Backout Procedure ................................................................................................... 6
4.2.1 Disable & Remove Objects from Bulk Operation .............................................. 6
4.2.2 Save your changes and close the forms. .............................................................. 6
Page 1 of 6
Hold-Time Enablement Creation in 5620
SAM – Method of Procedure (MOP)
1 INTRODUCTION
In 5620 SAM, Administrator can enable physical port hold-time feature based on
managed-object statistics for massive deployment using Bulk Operations method.
The hold-time feature do shutdown a particular pysical port which observing some
falppinf or bounching in order to avoid storm alarm and event-control log which
burden both SAM and its node too much. Indosat has approved to use 40 sec at
Port Up value for the reference.
The procedures in this document describe the steps to create a bulk operation to
enable hold-time feature massively in all of the network via SAM 12.0R7.
2 LOCATION
SITE System DATE START TIME END TIME
KPPTI lt 16 5620sam 23/12/2015 09:00 17:00
3 ASSUMPTIONS
It is assumed that the following items are configured in the network prior to
executing this MOP:
4 PROCEDURES
Issue: Ed1.0 Date: 21/12/2015
Page 2 of 6
Hold-Time Enablement Creation in 5620
SAM – Method of Procedure (MOP)
1. Choose Tools→Bulk Operation from the 5620 SAM main menu. The
Bulk Operation form opens.
2. Specify the filter to select all of network port mode under managed
nodes.
Page 3 of 6
Hold-Time Enablement Creation in 5620
SAM – Method of Procedure (MOP)
4. Next to Change Review mode in order to make sure that all of the
defined as proper requested.
1. Choose Tools → Bulk Operation from the 5620 SAM main menu. The
Bulk Change Operation form opens.
Page 4 of 6
Hold-Time Enablement Creation in 5620
SAM – Method of Procedure (MOP)
Page 5 of 6
Hold-Time Enablement Creation in 5620
SAM – Method of Procedure (MOP)
1. Choose Tools→Bulk Operation then click Search from the 5620 SAM
main menu. The Bulk Operation form opens
Page 6 of 6