Documente Academic
Documente Profesional
Documente Cultură
a) SRVCC
b) ROHC (Robust Header Compression)
c) Optimized Segmentation
d) TTI Bundling
Input File for Craig palmer & Howard Tool
Process to Analyze B2 Trigger (SRVCC) in L3
Signature for TTI Bundling
SRS Over Estimation
->Check RF Condition
->Check SIP messages if there is any 500 level message (Core team support
required)
->In L1 & L3 find out what does happen during the process of call setup
->Check during the call setup time (time of QCI 1 bearer setup) if there is any
X2 or B2 event or any X2 & TAU collision .(we can see QCI 5,8 & 1 Bearer setup
& can conclude)
->
1: Core issues-
A:- Check in SIP messages if there is 500 level message
EXAMPLES:
1:-
2:
1: Special cases-
a: ) Known Issues (already in list of AR )
b: ) Message collision
c: ) During the call setup time B2& X2 do trigger
EXAMPLES:
1:-
2:-
3:-
In L1 messages check that UE transmits any packet or not this means UE is still in call
setup process.
In below mention example you can see that Activated bearer & X2 HO , during this UE
was not transmitting any packet
UE sent “CANCLE”
CBR : Constant BIT Rate
Activate
dedicated Bear
No
Packets
transmit
X2 HO
4:-
Parameters _ PHX Market
Drop Signatures:
1: UE declares RLF after failing to read SIBs following successful HO
2: UE declares RLF after failing to read SIBs following TTI-B enabling
3: UE declares RLF after Unanswered MR report : DL/UL Failures
4: UE declares RLF after OOS timeout
5: UE declares RLF after RACH MSG Failures
6: Triggered IRAT instead of SRVCC
7: UE1/UE2 Simultaneous SRVCC
8: SRVCC Collision with X2HO
9: Call dropped after SRVCC to 3G
10: Call dropped on 3G.
11: TA Drift AR 1-5067284
12: Incorrect DL PDCP SN on target after intra-eNB HO leads to
ROHC failures: AR- 1-5050344
13: Contention-free RACH 3 failure AR: 1-5056835
14: Unable to analyze - UE logs missing
15: Unable to analyze - Corrupted UE log files
16: Under Investigation
17: Early Termination
18: TAU and X2HO Collision
19: Incorrectly Pegged: Should be Accessibility Failure
20: UL Noise
21: PDCP 12bit-7bit border
22: Site Configuration Issue (Outside Polygon)
L1 : You can see ROHC starts Failing & after HO & SN is non zero for the 1 st PDCP
packet.
Signature11: TA Drift AR 1-5067284
How to Start Analysis on QCAT& description about Key
Messages
1: Upload QXDM File
2: Filter out imp LTE messages