Documente Academic
Documente Profesional
Documente Cultură
LED TV
SERVICE MANUAL
CHASSIS : UJ71Q/UT74Q
CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
Copyright © 2017 LG Electronics Inc. All rights reserved. Only training and service purposes.
CONTENTS
CONTENTS ............................................................................................... 2
SPECIFICATION........................................................................................ 6
4. Model Specification
(1) - S
No Item Specification Remark
1 Market Central and South AMERICA
2 Broadcasting system Digital : SBTVD
Analog : NTSC / PAL-M / PAL-N
3 Available Channel BAND NTSC
VHF 2 ~ 13
UHF 14 ~ 69
DTV 2 ~ 69
CATV 1 ~ 135
4 Receiving system Digital : SBTVD /
Analog : NTSC-M / PAL-M / PAL-N
5 Video Input NTSC / PAL-M / PAL-N
6 Component Input Y/Cb/Cr, Y/ Pb/Pr Rear RCA
7 HDMI Input HDMI 3 PC / DTV format, Support HDCP2.2
HDMI 2 PC / DTV format, Support HDCP2.2 Side, Support ARC
HDMI 1 PC / DTV format, Support HDCP2.2
8 Audio Input Component / AV Audio / DVI audio L/R Input ; Rear
Component and av and DVI use same jack ;
Rear (Gender)
9 SPDIF out(1EA) Optical Audio out Rear (1EA),
10 USB Input(3EA) EMF, DivX HD, For SVC (download) Side JPEG, MP3, DivX HD
USB 2.0 : 2EA
USB 3.0 :1EA
(3) Click [YES]: initiate the download and install of the update.
(2) C lick [CHEK FOR UPDATES] : system check newest
version
(4) C lick [Check Now]: move to “About This TV” page for
update
(5) TV is updating
(3) Click [DOWNLOAD AND INSTALL]
(4) TV is updating
(6) Turn OFF the TV and On. Check the updated SW Version
and Tool Option
PMIC
- 11 -
EPI 3G/1.5G
Main
SoC V x 1 2.97Gbps
V x 1(60Hz, 8lane, 2.97Gbps) only
HDMI1 HDMI 2.0 PHY3_RX0N I2C2
Block Diagram
Copyright ©
HDMI3 HDMI 2.0 PHY1_RX0N I2S Out
MAIN Audio AMP
HDMI4 HDMI 2.0 PHY0_RX0N I2C 0
33pF
3.3KΩ
IC3000 SCL1
MICOM 33Ω SCL2 3.3KΩ
SDA1
SDA2
- 12 -
33Ω Module TCON
+3.3V_NORMAL +3.3V_TU
Copyright ©
IC9400 33Ω
3.3KΩ 1.8KΩ
SCL2
33Ω
SDA2
SCL5
IC9200 33Ω TUNER
33Ω SDA5
+3.3V_NORMAL 1.2V_DEMOD
IC1400 / 3A IC6900 / 2A TUNER
NTP7515
IC2300 / 2A +AVDDT_EPI_C4TX M16P
NVRAM
1.5V_DDR
IC1500 / 3.5A DDR3
MAX3232CDR
+3.5V_ST
IC1700 / 4A MICOM
IR_KEY
- 13 -
+3.5V_WOL ETHERNET
WIFI_EN WIFI
Copyright ©
+1.8V_IO
IC1800 / 3A M16P
+0.9V_CPU
IC2100 / 3A CPU_1V0
+0.9V_CORE M16P
IC2000 / 10A
[ 3.3V_TU] 3 +3.3V_TU
1.8KΩ
[ +D_Demod_Core] 13
Main
SoC
33 Ω SCL5 [ GPIO73]
SDA5[ GPIO72]
[ I2C_SCL5_TU] 1
[ I2C_SDA5_TU] 2
[ FE_DEMOD1_1_TS_CLK] 15 FE_DEMOD1_TS_CLK
[ FE_DEMOD1_TS_SYNC] 16 FE_DEMOD1_TS_SYNC TP_DVB_CLK
[ FE_DEMOD1_TS_VAL] 17 TP_DVB_SOP
FE_DEMOD1_TS_VAL
TP_DVB_VAL
- 14 -
FE_DEMOD1_TS_DATA[ 0] 18 TP_DVB_DATA0
FE_DEMOD1_TS_DATA[ 1] 19 TP_DVB_DATA1
FE_DEMOD1_TS_DATA[ 2] 20 TP_DVB_DATA2
FE_DEMOD1_TS_DATA[ 3] 21 FE_DEMOD1_TS_DATA [ 0- 7] TP_DVB_DATA3
FE_DEMOD1_TS_DATA[ 4] 22 TP_DVB_DATA4
FE_DEMOD1_TS_DATA[ 5] 23 TP_DVB_DATA5
FE_DEMOD1_TS_DATA[ 6] 24 TP_DVB_DATA6
FE_DEMOD1_TS_DATA[ 7] 25 TP_DVB_DATA7
Copyright ©
/ TU_RESET1
[ / TU_RESET1_TU] 10 GPIO26
IF_P_TU IF_P_MAIN
[ IF_P] 8 DMD_ADC_INP
Main SoC
AV_CVBS_IN AV1_CVBS_IN_SOC
CVBS_IN2
COMP2_Y COMP2_Y_IN_SOC
Y1_IN
COMP2_Pb COMP2_Pb_IN_SOC
VIN3P
COMP2_Pr COMP2_Pr_IN_SOC
VIN5P
COMP2/AV_L_IN AUAD_L_CH2_IN
AUAD_L_CH2_IN
COMP2/AV_R_IN AUAD_R_CH2_IN
AUAD_R_CH2_IN
Copyright © - 15 -
TU_CVBS_TU TU_CVBS
Tuner
CVBS_IN1
TU_SIF_TU, IF_P/N_TU TU_SIF, IF_P/N
AAD_ADC_SIF, DMD_ADC_INP, DMD_ADC_INN
AMP_MUTE
GPIO23 AMP_RESET_N
- 16 -
IC3000
MICOM
Copyright ©
Main SoC
Tuner
TUNER_SIF
TR BUF AAD_ADC_SIF
SIDE_HP_MUTE
HDMI4 (Rear)
HDMI 2.0
7. EPI block (PMIC)
DDC_SCL_3 JK3103
DDC_SCL_3
DDC_SDA_3
DDC_SDA_3
TMDS Link 8bits
HDMI3 (Rear)
HDMI2.0
Main SoC
JK3102
DDC_SCL_2
DDC_SCL_2
DDC_SDA_2 DDC_SDA_2
- 17 -
TMDS Link 8bits
HDMI_ARC
PHY0_ARC_OUT
CEC_REMOTE
Copyright ©
HDMI 2.0
DDC_SCL_1 JK3101
DDC_SCL_1
DDC_SDA_1 DDC_SDA_1
HDMI1 (SIDE)
X- Tal(X3000)
MICOM(IC3000) Q3001
32.768kHz HDMI_CEC_MICOM
IC1600
5V / 4A
USB2.0
USB2.0_2_DM1 USB1(SIDE)
USB2_1_DM0 +5V_USB_2
USB2_1_DP0 USB2.0_2_DP1
8. USB / WIFI / M-REMOTE / UART
- 18 -
WIFI_DM
USB2_2_DM0
USB2_2_DP0 WIFI_DP
WIFI Combo
Copyright ©
BT_RESET
BT_WAKEUP_DEVICE
BT_WAKEUP_HOST
SOC_TX
UART0_TXD/GPIO105
SOC_RX IC7200
UART0_RXD/GPIO106
VGH_EVEN
VGH_ODD
VGH
10 CLK[1:10]
10 GMA1,4,5,6,9,10,13,14,15,18
VST
VCOM1
VCOM2
VGL1
LS_VGL
GIP_RST
VCOMLFB
9. EPI 60Pin Interface (60Hz/3Gbps)
- 19 -
PM_VCC
SDA2/GPIO78 I2C_SDA_BACKEND
SCL2/GPIO79 I2C_SCL_BACKEND VCC18
Copyright ©
PANEL_VCC
E0
GST
PMIC
IC9200
MCLK
GCLK
VCORE
SWG
VDD_EPI
SWO PANEL_VCC
VCC18
Main SoC HVDD
VDD_EPI
TX 12lane
PM_VCC
VGH_EVEN
VGH_ODD
VGH
6 CLK[1:6]
8 GMA1,5,6,,9,10,13,14,18
GMA2,3,4,7,8,11,12,15,16,17
VST
VCOM1
VCOM2
VGL1
LS_VGL 10
GIP_RST
VCOMLFB
- 20 -
10. CEDS 68Pin Interface (60Hz/1.5Gbps)
PM_VCC HVDD
SDA2/GPIO78 I2C_SDA_BACKEND
I2C_SCL_BACKEND
VDD_EPI
SCL2/GPIO79 VCC18
Copyright ©
3.3V_NORMAL
PANEL_VCC
E0
GST
PMIC GAMMA IC
IC9200 IC9400
MCLK
GCLK
VCORE
SWG
VDD_EPI
SWO
Boost IC PANEL_VCC
PANEL_VCC
I2C_SDA_2_BE
I2C_SCL_2_BE
SDA2/GPIO78
SCL2/GPIO79
Control signal
Data format/Bit select/
HTPDN/LOCKN/MLE/MSE
11. V x 1 51Pin Interface (60Hz/2.97Gbs)
Copyright © - 21 -
Only for training and service purposes.
LG Electronics Inc. All rights reserved.
EXPLODED VIEW
IMPORTANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These
parts are identified by in the EXPLODED VIEW.
It is essential that these special safety parts should be replaced with the same components as
recommended in this manual to prevent Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.
901
951
400
952
902
800
120
521
540
121
530
571
820
500
570
LV1
200T
700
200A
A10
AR2
200
ARC1
AR1
1 Side View
(When assembling the B / C from the bottom of the assembled rear upper assembly)
2
a a a a a a a a
a a
a b Please do not assembled press
b a
curved portion (b)
a a
a
* Press direction (down from the outer surface)
: M3*5.5 5EA
: M3*10 7EA
: M4*10 1EA
*SCREW TORQUE :
Hook
Latch
- When it is Latch decomposition as shown in the figure below, and then decomposed by grasping the portions.
1 No video/Normal audio 1
2 No video/No audio 2
4 Color error 4
First of all, Check whether there is SVC Bulletin in GSCS System for these model.
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error A. Video error date
symptom
No video/ Normal audio Revised date 1/16
First of all, Check whether all of cables between board is inserted properly or not.
(Main B/D↔ Power B/D, LVDS Cable, Speaker Cable, IR B/D Cable,,,)
☞A1 ☞A18
No video Normal Y Check Back Light Y Check Power Y Replace T-con/Main
On Normal
Normal audio audio On with naked eye Board Board or module
voltage
13V
N N N
Move to No Check Power Board 13V output Repair Power
☞A18
video/No audio Board or parts
Replace Inverter
Normal Y
or module
voltage
End
N
Repair Power
Board or parts
1
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error A. Video error date
symptom
No video/ No audio Revised date 2/16
☞A18
No Video/ Check voltage of Y Check and
Normal
No audio Power Board ( 13V…) replace
voltage?
MAIN B/D
N End
Replace Power
Board and repair
parts
2
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error A. Video error date
symptom
Picture broken/ Freezing Revised date 3/16
N
☞ A4
Check RF Cable
Normal Y Check SVC N Check Y
Connection Close
1. Reconnection Picture? S/W Version Bulletin? Tuner soldering
2. Install Booster N
Y
N
S/W Upgrade
N Contact with signal distributor
Normal
Picture? or broadcaster (Cable or Air)
Normal N
Y Picture? Replace
Main B/D
Y
Close
Close
3
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error A. Video error date
symptom
Color error Revised date 4/16
☞A6 ☞ A7
※ Check
Check color by input
and replace
-External Input Y Y Y
Color Link Cable Color Color
-COMPONENT Replace Main B/D Replace module
error? (V by one) error? error?
-AV
and contact
-HDMI N N N
condition
☞A8 Check
External Input/ External device Y
external
Check Test pattern Component /Cable Replace Main/T-con B/D
device and
error normal
cable
N
Request repair
for external
device/cable
4
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Y
Connect other external
Normal N HDMI/
device and cable N
screen? DVI
(Check normal operation of Screen Replace
External Input, Component, normal? Main /T-con
Y RGB and HDMI/DVI by B/D
connecting Jig, pattern
Generator ,Set-top Box etc.
End
5
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error B. Power error date
symptom
No power Revised date 6/16
☞A17 ☞A18
DC Power on Replace
Check Power LED Y Normal N Check Power Y
by pressing Power Key OK? Power
Logo LED On? operation? On ‘”High”
On Remote control B/D
. Stand-By: Red or Turn On
N Y
. Operating: Turn Off
Check Power cord Replace Main B/D
was inserted properly
☞A18
N Measure voltage of each output of Power B/D
Normal?
Y Y Y
※ Normal
voltage?
Replace Main B/D
Close Normal
Check ST-BY 3.5V
Y
voltage? N
☞A18 Replace Power B/D
N
Replace Power
B/D
6
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error B. Power error date
symptom
Off when on, off while viewing, power auto on/off Revised date 7/16
Check outlet
☞A19
N Y
Check A/C cord Error? Check Power Off CPU
Replace Main B/D Normal? End
Mode Abnormal
N
Check for all 3- phase
power out Y Abnormal Replace Power B/D
1
* Please refer to the all cases which Status Power off List Explanation
"POWEROFF_REMOTEKEY" Power off by REMOTE CONTROL
can be displayed on power off mode.
"POWEROFF_OFFTIMER" Power off by OFF TIMER
"POWEROFF_SLEEPTIMER" Power off by SLEEP TIMER
"POWEROFF_INSTOP" Power off by INSTOP KEY
"POWEROFF_AUTOOFF" Power off by AUTO OFF
Normal "POWEROFF_ONTIMER" Power off by ON TIMER
"POWEROFF_RS232C" Power off by RS232C
"POWEROFF_RESREC" Power off by Reservated Record
"POWEROFF_RECEND" Power off by End of Recording
"POWEROFF_SWDOWN" Power off by S/W Download
"POWEROFF_UNKNOWN" Power off by unknown status except listed case
"POWEROFF_ABNORMAL1" Power off by abnormal status except CPU trouble
Abnormal
"POWEROFF_CPUABNORMAL" Power off by CPU Abnormal
7
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error C. Audio error date
symptom
No audio/ Normal video Revised date 8/16
☞A20 ☞A21+A18
No audio
Check user N Check audio B+
Normal Y
menu > Off 13V of Power
Screen normal voltage
Speaker off Board
Y N
Check N
Disconnection Replace MAIN Board End
Speaker
disconnection
Y
Replace Speaker
8
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error C. Audio error date
symptom
Wrecked audio/ discontinuation/noise Revised date 9/16
Wrecked audio/
☞A21+A18
Check and replace
Discontinuation/ Check audio
speaker and
Noise for B+ Voltage (13V)
connector
Check input all audio
signal Y Y
Signal
-RF
normal? Wrecked audio/
-External Input Normal
signal Discontinuation/
N Replace Main B/D voltage?
Noise only
for D-TV
N
Wrecked audio/
Discontinuation/
Replace Power B/D
Noise only
for Analog
(When RF signal is not
received)
Request repair to external Wrecked audio/ Replace Main B/D End
cable/ANT provider Discontinuation/
Noise only
for External Input
(In case of N
External Input Connect and check Normal
signal error) other external audio?
Check and fix device
external device Y
9
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Replace R/C
10
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Normal Y
☞A4 operating? Close
Is show ok N Press the back
RF Receiver ver N message? key about 5sec
Close N
is “00.00”?
Y
Replace
MR15
Y Close
11
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
☞A4 ☞A24
Check the Wi-Fi Mac value N Check the Wifi wafer Normal N Replace
INSTART menu is “NG”? 1pin Voltage? Main B/D
Y
☞A24 Y
Close
Check & Repair
Wifi cable
connection
☞A4
Wi-Fi Mac value N
is “NG”? Close
12
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
☞A4 ☞A25
Check the Camera Ver. N Reconnect the Normal N Replace
INSTART menu is “NULL”? Camera module operation? Main B/D
Y
Y
Close
Change the
Camera module
13
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error D. Function error date
symptom
External device recognition error Revised date 14/16
Y Check technical
Check External Input and
Signal information Technical N
input Component Replace Main B/D
input? - Fix information information?
Recognition error
signal
- S/W Version
N Y
HDMI/
Check and fix DVI, Optical
Fix in Replace Main B/D
external device/cable Recognition error
accordance
with technical
information
14
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error E. Noise date
symptom
Circuit noise, mechanical noise Revised date 15/16
Identify Check
Circuit
nose location of Replace PSU
noise
type noise
15
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process
Established
Error F. Exterior defect date
symptom
Exterior defect Revised date 16/16
Cabinet
Replace cabinet
damage
Remote
control Replace remote control
damage
Stand
Replace stand
dent
16
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Contents of Standard Repair Process Detail Technical Manual
<ALL MODELS>
After turning on the power and disassembling the case, check with the naked eye,
whether you can see light from locations.
A1
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom A. Video error_No video/Normal audio date
Revised
Content Check White Balance value A2
date
<ALL MODELS>
Entry
Entrymethod
method
1.1.Press
Pressthe
theADJ
ADJbutton
buttonononthe
theremote
remotecontroller
controllerforforadjustment.
adjustment.
2.2.Enter
Enterinto
intoWhite
WhiteBalance
Balanceofofitem
item6.13.
3.3.After
Afterrecording
recordingthe
theR,R,G,G,B B(GAIN,
(GAIN,Cut)
Cut)value
valueofofColor
ColorTemp
Temp
(Cool/Medium/Warm),
(Cool/Medium/Warm),re-enterre-enterthe
thevalue
valueafter
afterreplacing
replacingthe
theMAIN
MAINBOARD.
BOARD.
A2
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom A. Video error_Video error, video lag/stop date
TUNER input signal strength checking method Revised
Content date A3
<ALL MODELS>
A3
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom A. Video error_Video error, video lag/stop date
Version checking method Revised
Content date A4
Version
A4
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom
A. Video error_Video error, video lag/stop
date
Revised
Content TUNER checking part A5
date
<ALL MODELS>
Checking method:
1. Check the signal strength or check whether the screen is normal when the external device is connected.
2. After measuring each voltage from power supply, finally replace the MAIN BOARD.
3. If you can`t see the UHD live TV, please connect signal at left side of jack. (Korea model only)
A5
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error A. Video error _Vertical/Horizontal bar, Established
symptom residual image, light spot date
Revised
Content Connection diagram (1) date A6
<ALL MODELS>
A6
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom A. Video error_Color error date
Revised
Content Check Link Cable(FFC) reconnection condition date A7
<ALL MODELS>
Check the contact condition of the Link Cable, especially dust or mis insertion.
A7
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom
A. Video error_Color error
date
Adjustment Test pattern - ADJ Key Revised
Content date A8
Checking item : 1. Defective pixel 2. Residual image 3. MODULE error (ADD-BAR,SCAN BAR..)
4.Video error (Classification of MODULE or Main-B/D!)
A8
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Appendix : Exchange Main Board (1)
Solder defect, CNT Broken Solder defect, CNT Broken Solder defect, CNT Broken
A - 1/5
Solder defect, Short/Crack Fuse Open, Abnormal power section Abnormal Display
A - 2/5
No picture/Sound Ok
A - 3/5
Un-repairable Cases
In this case please exchange the module.
Crosstalk Crosstalk
A - 4/5
Horizontal
TAB ICBlock
Horizontal Block Horizontal line
Gate Defect Gate TAB IC Defect
Gate TAB IC Defect Gate TAB IC Defect Gate TAB IC Defect
Un-repairable Cases
In this case please exchange the module.
Horizontal Block
Gate TAB IC Defect
Gate TAB IC Defect
A - 5/5
<ALL MODELS>
A17
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom
B. Power error _No power
date
Revised
Content Check power input voltage and ST-BY 3.5V A18
date
A18
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error
symptom B. Power error _Off when on, off whiling viewing Established
date
Revised
Content POWER OFF MODE checking method date A19
<ALL MODELS>
Entry method
A19
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom C. Audio error_No audio/Normal video
date
Revised
Content Checking method in menu when there is no audio date A20
<ALL MODELS>
Checking method
1. Press the Setting button on the remote control
2. Select the Sound function of the Menu
3. Select the Sound Out
4. Select TV Speaker
A20
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom C. Audio error_No audio/Normal video date
Voltage and speaker checking method Revised
Content date A21
when there is no audio
<ALL MODELS>
UJ7*
1 VSYNC 2 SIN
3 GND 4 SCLK
5 DRV_ON 6 PDIM1
7 GND 8 GND
9 A13 10 A13
11 D13 12 D13
② 13 GND 14 D13
15 PWR_ON 16 PDIM2
17 GND 18 GND ①
UJ6*
1 DRV_ON 2 PDIM1
3 GND 4 GND
5 A13 6 A13
7 D13 8 D13
③
9 GND 10 D13
11 PWR_ON 12 PDIM2 1 SPK_R-
2 SPK_R+
Checking order when there is no audio 3 SPK_L-
4 SPK_L+
1.Check the contact condition of or 13V connector of Main Board
3.Connect the tester RX1 to the speaker terminal and if you hear the Chik Chik sound when you touch the
GND and output terminal, the speaker is normal.
A21
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom D. Function error date
Revised
Content Remote control operation checking method date A22
<ALL MODELS>
1 +3.5V
IR & LOGO light Front 2 WIFI_DM
3 WIFI_DP
4 GND
5 WOL_ON
6 3.5V
7 COMBO_RESET
8 GND
3.AS checking the Pre-Amp(IR LED light) , the power is in ON condition, an Analog Tester 25 GND
A22
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Standard Repair Process Detail Technical Manual
Error Established
symptom D. Function error date
Revised
Content Remote control operation checking method date A22
<ALL MODELS>
1 +3.5V
2 WIFI_DM
① Wifi & BT Front 3 WIFI_DP
4 GND
5 WOL_ON
6 3.5V
7 COMBO_RESET
8 GND
9 COMBO_WAKEUP_DEVICE
10 COMBO_WAKEUP_HOST
A22
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only for training and service purposes.