ee]
NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELA
SEMESTER EXAMINATION, 2018_SPRING
PROGRAMME: B. Tech, 6th SEMESTER,
Dept. Code: CE, Course Code: CE-322, Course Name: Design of Steel Structures
Full Marks: 30 Duration of Examination: 2 hours
‘This question paper contains one page
‘Answer all questions.
Any missing data may be assumed suitably.
(Use of IS 800-2007 and Steel Table are permitted)
QNo __| Marks
No.1 Design the bolted connection as shown below. The gusset plate
of 10mm thickness. Use black bolt. The bottom chord member is | 8
continuous.
120kN |
|
|
| \ 140 kN |
f
Isao /
ISA 90x60x8
Je cue
san
| ISA {10x110x8 160 KN
gure I Joint in the bottom chord member of the truss
No.2 Determine the shape factor (with respect to the axis parallel to the flange) |
for an T-section with the following properties: ‘6
Flange: 200mm(width)x20mn (thickness) |
| Web: 300mm(depth)x20mmn (thickness)
A tension member of a roof truss carries a factored load of 300 KN. The
length of the member is 3.5 m. Use 20 mm diameter bolts of class 4.6, f, | 49
= 250 MPa and fy = 410 MPa. The member is subjected to the possible
reversal of stress due to the action of wind, Design the tension member
using a double angle section
Nod \6
Discuss different failure modes of bolted connection.