Documente Academic
Documente Profesional
Documente Cultură
Module 1
Helical
Gears
K
H
G
RH S1 Shape LH
■ Module 1
Catalog Module No. of teeth Bore Hub dia. Pitch dia. Outside dia. Face width NOTE 1 Hub width Total length
Direction of Helix
No. m z AH7 B C D E F G
KHG1- 20R R
1 020 6 17 020 022 8 10 18
KHG1- 20L L
KHG1- 22R R
1 022 8 18 022 024 8 10 18
KHG1- 22L L
KHG1- 24R R
1 024 8 20 024 026 8 10 18
KHG1- 24L L
KHG1- 25R R
1 025 8 20 025 027 8 10 18
KHG1- 25L L
KHG1- 28R R 1 028 8 20 028 030 8 10 18
KHG1- 28L L
KHG1- 30R R
1 030 10 25 030 032 8 10 18
KHG1- 30L L
KHG1- 32R R 1 032 10 25 032 034 8 10 18
KHG1- 32L L
KHG1- 35R R 1 035 10 25 035 037 8 10 18
KHG1- 35L L
KHG1- 36R R 1 036 10 25 036 038 8 10 18
KHG1- 36L L
KHG1- 40R R
1 040 10 30 040 042 8 10 18
KHG1- 40L L
KHG1- 44R R 1 044 10 30 044 046 8 10 18
KHG1- 44L L
KHG1- 45R R 1 045 10 30 045 047 8 10 18
KHG1- 45L L
KHG1- 48R R 1 048 10 30 048 050 8 10 18
KHG1- 48L L
KHG1- 50R R
1 050 12 35 050 052 8 10 18
KHG1- 50L L
KHG1- 60R R
1 060 12 40 060 062 8 10 18
KHG1- 60L L
KHG1- 70R R 1 070 12 40 070 072 8 10 18
KHG1- 70L L
KHG1- 80R R 1 080 15 50 080 082 8 10 18
KHG1- 80L L
KHG1- 90R R 1 090 15 50 090 092 8 10 18
KHG1- 90L L
KHG1-100R R 1 100 15 50 100 102 8 10 18
KHG1-100L L
CAUTION: Right handed and left handed helical gears of the same module are designed to mesh as a pair, but they are not interchangeable with SH type helical gears.
NOTE 1: It is possible to perform secondary operations except on the gear teeth. We recommend that you avoid shortening the hub which will lead to the deformation of the
gears.
134
Ground Helical Gears
Specifications
Precision grade JIS N6 grade (JIS B1702-1: 1998) Heat treatment Thermal refined, tooth surfaces
OLD JIS 2 grade (JIS B1702: 1976) induction hardened
Helical
Reference section
Gears
of gear Rotating plane Tooth hardness 50~55HRC
Gear teeth Standard full depth Surface treatment Black oxide except ground surfaces
Transverse pressure
angle 20° Tooth surface finish Ground
K
Helix angle 21°30’ Datum reference surface Bore H
for gear grinding G
Material SCM440 Secondary Operations Possible except tooth area
Allowable torque (N.m) NOTE 2 Allowable torque (kgf.m) Backlash (mm) Weight Catalog
Shape
Bending strength Surface durability Bending strength Surface durability NOTE 3 (kgf) No.
135
KHG Ground Helical Gears Transverse
Module 1.5
Helical
Gears
K
H
G
RH S1 Shape LH
■ Module 1.5
Catalog Module No. of teeth Bore Hub dia. Pitch dia. Outside dia. Face width NOTE 1 Hub width Total length
Direction of Helix
No. m z AH7 B C D E F G
KHG1.5- 20R R
1.5 020 12 24 030.0 .033.0 12 12 24
KHG1.5- 20L L
KHG1.5- 22R R
1.5 022 12 26 033.0 .036.0 12 12 24
KHG1.5- 22L L
KHG1.5- 24R R
1.5 024 12 28 036.0 .039.0 12 12 24
KHG1.5- 24L L
KHG1.5- 25R R
1.5 025 12 30 037.5 .040.5 12 12 24
KHG1.5- 25L L
KHG1.5- 26R R 1.5 026 12 32 039.0 .042.0 12 12 24
KHG1.5- 26L L
KHG1.5- 28R R 1.5 028 15 36 042.0 .045.0 12 12 24
KHG1.5- 28L L
KHG1.5- 30R R
1.5 030 15 38 045.0 .048.0 12 12 24
KHG1.5- 30L L
KHG1.5- 32R R 1.5 032 15 40 048.0 .051.0 12 12 24
KHG1.5- 32L L
KHG1.5- 35R R
1.5 035 15 42 52.5 .055.5.0 12 12 24
KHG1.5- 35L L
KHG1.5- 36R R
1.5 036 15 45 .054.0 .057 .0 12 12 24
KHG1.5- 36L L
KHG1.5- 40R R 1.5 040 15 50 060.0 .063.0 12 12 24
KHG1.5- 40L L
KHG1.5- 44R R
1.5 044 15 50 066.0 .069.0 12 12 24
KHG1.5- 44L L
KHG1.5- 45R R
1.5 045 18 50 067.5 .070.5 12 12 24
KHG1.5- 45L L
KHG1.5- 48R R 1.5 048 18 50 072.0 .075.0 12 12 24
KHG1.5- 48L L
KHG1.5- 50R R 1.5 050 18 60 075.0 .078.0 12 12 24
KHG1.5- 50L L
KHG1.5- 52R R 1.5 052 18 60 078.0 081.0 12 12 24
KHG1.5- 52L L
KHG1.5- 60R R
1.5 060 20 60 090.0 093.0 12 12 24
KHG1.5- 60L L
KHG1.5- 70R R
1.5 070 20 60 105.0 108.0 12 12 24
KHG1.5- 70L L
KHG1.5- 80R R 1.5 080 20 70 120.0 123.0 12 12 24
KHG1.5- 80L L
KHG1.5- 90R R 1.5 090 20 70 135.0 138.0 12 12 24
KHG1.5- 90L L
KHG1.5-100R R 1.5 100 20 70 150.0 1530 12 12 24
KHG1.5-100L L
CAUTION: Right handed and left handed helical gears in the same module are designed to mesh as a pair, but they are not interchangeable with SH type helical gears.
NOTE 1: It is possible to perform secondary operations except on the gear teeth. We recommend that you avoid shortening the hub which will lead to the deformation of the
gears.
136
Ground Helical Gears
Specifications
Precision grade JIS N6 grade (JIS B1702-1: 1998) Heat treatment Thermal refined, tooth surfaces
OLD JIS 2 grade (JIS B1702: 1976) induction hardened
Helical
Reference section
Gears
of gear Rotating plane Tooth hardness 50~55HRC
Gear teeth Standard full depth Surface treatment Black oxide except ground surfaces
Transverse pressure
angle 20° Tooth surface finish Ground
K
Helix angle 21°30’ Datum reference surface Bore H
for gear grinding G
Material SCM440 Secondary Operations Possible except tooth area
Allowable torque (N.m) NOTE 2 Allowable torque (kgf.m) Backlash (mm) Weight Catalog
Shape
Bending strength Surface durability Bending strength Surface durability NOTE 3 (kgf) No.
137
KHG Ground Helical Gears Transverse
Module 2
Helical
Gears
K
H
G
RH S1 Shape LH
■ Module 2
Catalog Module No. of teeth Bore Hub dia. Pitch dia. Outside dia. Face width NOTE 1 Hub width Total length
Direction of Helix
No. m z AH7 B C D E F G
KHG2- 15R R
2 015 12 024 030 034 16 13 29
KHG2- 15L L
KHG2- 16R R
2 016 12 026 032 036 16 13 29
KHG2- 16L L
KHG2- 18R R
2 018 12 030 036 040 16 13 29
KHG2- 18L L
KHG2- 20R R
2 020 15 032 040 044 16 13 29
KHG2- 20L L
KHG2- 22R R
2 022 15 036 044 048 16 13 29
KHG2- 22L L
KHG2- 24R R
2 024 15 038 048 052 16 13 29
KHG2- 24L L
KHG2- 25R R
2 025 15 040 050 054 16 13 29
KHG2- 25L L
KHG2- 26R R
2 026 15 042 052 056 16 13 29
KHG2- 26L L
KHG2- 28R R
2 028 15 045 056 060 16 13 29
KHG2- 28L L
KHG2- 30R R
2 030 18 050 060 064 16 13 29
KHG2- 30L L
KHG2- 32R R
2 032 18 050 064 068 16 13 29
KHG2- 32L L
KHG2- 35R R
2 035 18 050 070 074 16 13 29
KHG2- 35L L
KHG2- 36R R
2 036 18 050 072 076 16 13 29
KHG2- 36L L
KHG2- 40R R
2 040 20 060 080 084 16 13 29
KHG2- 40L L
KHG2- 44R R
2 044 20 060 088 092 16 13 29
KHG2- 44L L
KHG2- 45R R
2 045 20 060 090 094 16 13 29
KHG2- 45L L
KHG2- 48R R
2 048 20 060 096 100 16 13 29
KHG2- 48L L
KHG2- 50R R
2 050 25 060 100 104 16 13 29
KHG2- 50L L
KHG2- 52R R
2 052 25 065 104 108 16 13 29
KHG2- 52L L
KHG2- 60R R
2 060 25 065 120 124 16 13 29
KHG2- 60L L
KHG2- 70R R
2 070 25 070 140 144 16 13 29
KHG2- 70L L
KHG2- 80R R
2 080 25 080 160 164 16 13 29
KHG2- 80L L
KHG2- 90R R
2 090 25 090 180 184 16 13 29
KHG2- 90L L
KHG2-100R R
2 100 25 100 200 204 16 13 29
KHG2-100L L
CAUTION: Right handed and left handed helical gears in the same module are designed to mesh as a pair, but they are not interchangeable with SH type helical gears.
NOTE 1: It is possible to perform secondary operations except on the gear teeth. We recommend that you avoid shortening the hub which will lead to the deformation of the
gears.
138
Ground Helical Gears
Specifications
Precision grade JIS N6 grade (JIS B1702-1: 1998) Heat treatment Thermal refined, tooth surfaces
OLD JIS 2 grade (JIS B1702: 1976) induction hardened
Helical
Reference section
Gears
of gear Rotating plane Tooth hardness 50~55HRC
Gear teeth Standard full depth Surface treatment Black oxide except ground surfaces
Transverse pressure
angle 20° Tooth surface finish Ground
K
Helix angle 21°30’ Datum reference surface Bore H
for gear grinding G
Material SCM440 Secondary Operations Possible except tooth area
Allowable torque (N.m) NOTE 2 Allowable torque (kgf.m) Backlash (mm) Weight Catalog
Shape
Bending strength Surface durability Bending strength Surface durability NOTE 3 (kgf) No.
KHG2- 15R
S1 040.45 0022.75 (04.125) (002.320) 0.10 ~ 0.20 0.11
KHG2- 15L
0.13 KHG2- 16R
S1 040.63 0024.09 (04.143) (002.457) 0.10 ~ 0.20 KHG2- 16L
KHG2- 18R
S1 048.53 0031.86 (04.949) (003.249) 0.10 ~ 0.20 0.17 KHG2- 18L
KHG2- 20R
S1 056.62 0040.83 (05.774) (004.164) 0.10 ~ 0.20 0.20 KHG2- 20L
KHG2- 22R
S1 064.87 0050.56 (06.615) (005.156) 0.10 ~ 0.20 0.25 KHG2- 22L
KHG2- 24R
S1 073.25 0061.43 (07.470) (006.264) 0.10 ~ 0.20 0.30 KHG2- 24L
KHG2- 25R
S1 077.49 0067.29 (07.902) (006.862) 0.10 ~ 0.20 0.33 KHG2- 25L
KHG2- 26R
S1 081.76 0073.44 (08.337) (007.489) 0.12 ~ 0.22 0.37 KHG2- 26L
KHG2- 28R
S1 090.35 0086.62 (09.213) (008.833) 0.12 ~ 0.22 0.43 KHG2- 28L
KHG2- 30R
S1 099.05 0101.00 (10.100) (010.300) 0.12 ~ 0.22 0.50 KHG2- 30L
KHG2- 32R
S1 107.80 0116.50 (10.990) (011.880) 0.12 ~ 0.22 0.55 KHG2- 32L
KHG2- 35R
S1 121.00 0142.20 (12.340) (014.500) 0.12 ~ 0.22 0.63 KHG2- 35L
(12.800) (015.430) 0.12 ~ 0.22 KHG2- 36R
S1 125.50 151.3 0.65 KHG2- 36L
KHG2- 40R
S1 143.40 0191.00 (14.620) (019.480) 0.12 ~ 0.22 0.85 KHG2- 40L
KHG2- 44R
S1 161.40 0235.70 (16.460) (024.040) 0.12 ~ 0.22 0.98 KHG2- 44L
KHG2- 45R
S1 165.90 0247.70 (16.920) (025.260) 0.12 ~ 0.22 1.00 KHG2- 45L
KHG2- 48R
S1 171.80 0273.20 (17.520) (027.860) 0.12 ~ 0.22 1.10 KHG2- 48L
KHG2- 50R
S1 180.50 0298.90 (18.410) (030.480) 0.12 ~ 0.22 1.20 KHG2- 50L
KHG2- 52R
S1 189.30 0326.00 (19.300) (033.240) 0.14 ~ 0.24 1.29 KHG2- 52L
KHG2- 60R
S1 224.60 0446.70 (22.900) (045.550) 0.14 ~ 0.24 1.60 KHG2- 60L
KHG2- 70R
S1 269.00 0624.80 (27.430) (063.710) 0.14 ~ 0.24 2.20 KHG2- 70L
(30.650) (081.440) 0.14 ~ 0.24 KHG2- 80R
S1 300.60 798.6 2.90 KHG2- 80L
KHG2- 90R
S1 343.60 1030.00 (35.040) (105.000) 0.14 ~ 0.24 3.37 KHG2- 90L
KHG2-100R
S1 386.70 1290.00 (39.430) (131.500) 0.14 ~ 0.24 4.63
KHG2-100L
NOTE 2: The allowable torques shown in the table are the calculated values according to the assumed usage conditions. Please see page 131 for more details.
NOTE 3: The backlash values shown in the table are the theoretical values of a pair of identical gears in mesh.
139
KHG Ground Helical Gears Transverse
Module 2.5
Helical
Gears
K
H
G
RH S1 Shape LH
■ Module 2.5
Catalog Module No. of teeth Bore Hub dia. Pitch dia. Outside dia. Face width NOTE 1 Hub width Total length
Direction of Helix
No. m z AH7 B C D E F G
KHG2.5-15R R
2.5 15 15 30 037.5 042.5 20 14 34
KHG2.5-15L L
KHG2.5-16R R
2.5 16 15 32 040.0 045.0 20 14 34
KHG2.5-16L L
KHG2.5-18R R 2.5 18 15 38 045.0 050.0 20 14 34
KHG2.5-18L L
KHG2.5-20R R 2.5 20 18 40 050.0 055.0 20 14 34
KHG2.5-20L L
KHG2.5-22R R 2.5 22 18 44 055.0 060.0 20 14 34
KHG2.5-22L L
KHG2.5-24R R
2.5 24 18 48 060.0 065.0 20 14 34
KHG2.5-24L L
KHG2.5-25R R 2.5 25 20 50 062.5 067.5 20 14 34
KHG2.5-25L L
KHG2.5-26R R
2.5 26 20 50 065.0 070.0 20 14 34
KHG2.5-26L L
KHG2.5-28R R 2.5 28 20 60 070.0 075.0 20 14 34
KHG2.5-28L L
KHG2.5-30R R
2.5 30 20 65 075.0 080.0 20 14 34
KHG2.5-30L L
KHG2.5-32R R 2.5 32 20 70 080.0 085.0 20 14 34
KHG2.5-32L L
KHG2.5-35R R 2.5 35 20 70 087.5 0092.5.0 20 14 34
KHG2.5-35L L
KHG2.5-36R R 2.5 36 20 70 090.0 095.0 20 14 34
KHG2.5-36L L
KHG2.5-40R R
2.5 40 25 70 100.0 105.0 20 14 34
KHG2.5-40L L
KHG2.5-44R R 2.5 44 25 75 110.0 115.0 20 14 34
KHG2.5-44L L
KHG2.5-45R R 2.5 45 25 75 112.5 117.5 20 14 34
KHG2.5-45L L
KHG2.5-48R R
2.5 48 25 75 1200 125.0 20 14 34
KHG2.5-48L L
KHG2.5-50R R 2.5 50 25 80 1250 130.0 20 14 34
KHG2.5-50L L
KHG2.5-52R R 2.5 52 25 80 1300 135.0 20 14 34
KHG2.5-52L L
KHG2.5-60R R
2.5 60 25 80 1500 155.0 20 14 34
KHG2.5-60L L
CAUTION: Right handed and left handed helical gears in the same module are designed to mesh as a pair, but they are not interchangeable with SH type helical gears.
NOTE 1: It is possible to perform secondary operations except on the gear teeth. We recommend that you avoid shortening the hub which will lead to the deformation of the
gears.
140
Ground Helical Gears
Specifications
Precision grade JIS N6 grade (JIS B1702-1: 1998) Heat treatment Thermal refined, tooth surfaces
OLD JIS 2 grade (JIS B1702: 1976) induction hardened
Helical
Reference section
Gears
of gear Rotating plane Tooth hardness 50~55HRC
Gear teeth Standard full depth Surface treatment Black oxide except ground surfaces
Transverse pressure
angle 20° Tooth surface finish Ground
K
Helix angle 21°30’ Datum reference surface Bore H
for gear grinding G
Material SCM440 Secondary Operations Possible except tooth area
Allowable torque (N.m) NOTE 2 Allowable torque (kgf.m) Backlash (mm) Weight Catalog
Shape
Bending strength Surface durability Bending strength Surface durability NOTE 3 (kgf) No.
141
KHG Ground Helical Gears Transverse
Module 3
Helical
Gears
K
H
G
RH S1 Shape LH
■ Module 3
Catalog Module No. of teeth Bore Hub dia. Pitch dia. Outside dia. Face width NOTE 1 Hub width Total length
Direction of Helix
No. m z AH7 B C D E F G
KHG3-15R R 3 15 18 36 045 051 25 16 41
KHG3-15L L
KHG3-16R R
3 16 18 38 048 054 25 16 41
KHG3-16L L
KHG3-18R R
3 18 18 40 054 060 25 16 41
KHG3-18L L
KHG3-20R R
3 20 20 50 060 066 25 16 41
KHG3-20L L
KHG3-22R R 3 22 20 54 066 072 25 16 41
KHG3-22L L
KHG3-24R R
3 24 20 58 072 078 25 16 41
KHG3-24L L
KHG3-25R R 3 25 20 60 075 081 25 16 41
KHG3-25L L
KHG3-26R R 3 26 20 60 078 084 25 16 41
KHG3-26L L
KHG3-28R R 3 28 20 70 084 090 25 16 41
KHG3-28L L
KHG3-30R R
3 30 25 75 090 096 25 16 41
KHG3-30L L
KHG3-32R R 3 32 25 75 096 102 25 16 41
KHG3-32L L
KHG3-35R R 3 35 25 80 105 111 25 16 41
KHG3-35L L
KHG3-36R R
3 36 25 80 108 114 25 16 41
KHG3-36L L
KHG3-40R R 3 40 25 80 120 126 25 16 41
KHG3-40L L
KHG3-44R R 3 44 25 80 132 138 25 16 41
KHG3-44L L
KHG3-45R R 3 45 25 80 135 141 25 16 41
KHG3-45L L
KHG3-48R R 3 48 25 85 144 150 25 16 41
KHG3-48L L
KHG3-50R R 3 50 30 85 150 156 25 16 41
KHG3-50L L
KHG3-52R R 3 52 30 85 156 162 25 16 41
KHG3-52L L
KHG3-60R R
3 60 30 90 180 186 25 16 41
KHG3-60L L
CAUTION: Right handed and left handed helical gears in the same module are designed to mesh as a pair, but they are not interchangeable with SH type helical gears.
NOTE 1: It is possible to perform secondary operations except on the gear teeth. We recommend that you avoid shortening the hub which will lead to the deformation of the
gears.
142
Ground Helical Gears
Specifications
Precision grade JIS N6 grade (JIS B1702-1: 1998) Heat treatment Thermal refined, tooth surfaces
OLD JIS 2 grade (JIS B1702: 1976) induction hardened
Helical
Reference section
Gears
of gear Rotating plane Tooth hardness 50~55HRC
Gear teeth Standard full depth Surface treatment Black oxide except ground surfaces
Transverse pressure
angle 20° Tooth surface finish Ground
K
Helix angle 21°30’ Datum reference surface Bore H
for gear grinding G
Material SCM440 Secondary Operations Possible except tooth area
Allowable torque (N.m) NOTE 2 Allowable torque (kgf.m) Backlash (mm) Weight Catalog
Shape
Bending strength Surface durability Bending strength Surface durability NOTE 3 (kgf) No.
143