Documente Academic
Documente Profesional
Documente Cultură
MAINTENANCE
Basic Tutorials
TYPE OF INDOOR UNITS
• Eclipse edge
• Eclipse GE3
• CTR 8300
•Click on
configuration tab
•Select
networking
•Then select IP
addressing tab
•Change the IP to
the planned IP
addresses and
subnet mask
•Click on send to
save
•Connect your
computer to Ethernet
port 2
•Open your browser
and put the IP for the
equipment.
•User : root
•Password:admin123
• Click on radio
link
•Then click on
radio
configuration
•Click on Statistics
•Then click on
radio link
performance
•Open Putty
•Put the IP address of
Equipment
•Select Telnet
•Then click open
•Show Vlan
•Then it shows
you vlan database
•This command helps you to know how many users which are on
the network.
•Then you can know if the client is using service or not
NMS VLAN 9
VLAN 9 Gateway- 192.168.9.254/24
CTR NMS IP address- 192.168.9.120/24 - Assigned to Gi 0/2
• config t
• vlan 9
• name NMS_Vlan
• ports add gi 0/2 untagged gi 0/2
• ports add radio 0/1
• ports add gi 0/1
• exit
• interface vlan 9
• ip address 192.168.9.120 255.255.255.0
• no shut
• exit
• !
• interface gi 0/2
• no shut
• Map switch default
• management-out-band
• switchport Pvid 9
• exit
• vlan 9
• management
• config t
• vlan 1
• no ports
• exit
• interface gi 0/1
• no management
• shut
• exit
• vlan 2
• no ports
• exit
• interface vlan 2
• no ip address 192.168.1.1
• exit
• no vlan 2
• exit
• interface vlan 9
• ip address 192.168.9.121 255.255.255.0
• no shut
• exit
• !
• interface gi 0/2
• no shut
• Map switch default
• management-out-band
• switchport Pvid 9
• exit
• vlan 9
• management