Documente Academic
Documente Profesional
Documente Cultură
CIRCULATION lighting
WL-250BR/WM-175 72
WL-175/70 74
148
Versatility of applications was the guiding concept behind the development
Dimensions (mm)
of this luminaire. The robustness of its components, the simplicity of its Tube fitting. Short bracket.
maintenance and the high efficacy of its optical systems make it an ideal
choice for demanding installations, optimising operating expenses and
power consumption. Ø14
,5
The precise design of the reflectors employed guarantees minimum glare
454 254
levels, even when the reflector is viewed head-on, and the version with a
95
borosilicate glass prismatic lens (VP) offers an exceptional visual guide in Ø2
2,5
tunnel lighting applications.
701
148
Technical specification
498
502
Body
Housing in two parts (housing and door), in die-cast aluminium,
electrostatically sprayed with a polyester powder paint finish, following
anti-corrosion priming, and oven cured at 180°C. 246 ,5
Ø60 Ø14
Standard colour: RAL 7035 grey. Enquire for other colour options.
EPDM gasket between housing and door.
454
454 254
254 254 254
Electrical unit mounted on removable tray.
95
Ø2
2,5
Optics
Faceted aluminium reflectors with wide (DA) or narrow (DE) distribution.
Four different removable lenses – flat stippled tempered glass (VE), prismatic Angled bracket.
borosilicate glass (VP), flat transparent tempered glass (VT) and curved
502
502
borosilicate glass (VC) – mounted on door with a ethylene propylene diene
rubber (EPDM) gasket.
With the option of the glass sealed to the door with silicone.
Luminaire filtered by means of an activated charcoal filter in the housing.
Assembly VT and VE VT and VE VC
Direct mounting on both vertical and horizontal surfaces. Other mounting
254
254 254
254
systems upon demand. Photometric data
Mounting the luminaire vertically (fitted to walls), excellent illumination can
V2F/VT/DA/HAL250 V2F/VP/DA/VSAP400 V2F/VP/DA/VSAP150 V2F/VE/DE/VSAP150
be achieved, even with considerable separation, in the lighting of tunnels, Pos. Porta. B Pos. Porta. A Pos. Porta. FIJA Pos. Porta. 4
underpasses and security perimeter installations on building facades, as well 180° 150° 120° 180° 150° 120° 180° 150° 120° 180° 150° 120°
as accesses to underground car parks. Recommended height for mounting 300 200 200 240
0° 30°
500
0° 30°
500
0° 30°
600
0° 30°
PG-13.5 cable gland. INTENSIDAD EN PLANOS VERTICALES, EN INTENSIDAD EN PLANOS VERTICALES, EN INTENSIDAD EN PLANOS VERTICALES, EN INTENSIDAD EN PLANOS VERTICALES, EN
CANDELAS POR 1000 LUMENES CANDELAS POR 1000 LUMENES CANDELAS POR 1000 LUMENES CANDELAS POR 1000 LUMENES
LONGITUDINAL LONGITUDINAL LONGITUDINAL LONGITUDINAL
TRANSVERSAL TRANSVERSAL TRANSVERSAL TRANSVERSAL
PRINCIPAL PRINCIPAL PRINCIPAL PRINCIPAL
V2F Accessories
CEI 34.21 /EN 60598-1, IEC 60598 – 230V 50Hz – Class I – IP65 Description Pack Product
Qty Code
Description Lamp ILCOS code Weight Pack Product
VP GLASS LENS V2F 1 181013
(kg) Qty Code
464
Body
238
Housing in two parts (housing and door), in die-cast aluminium, Mounting.
628
electrostatically sprayed with a polyester powder paint finish, following
anti-corrosion priming, and oven cured at 180°C.
Standard colour: RAL 9011 black. Enquire for other colour options.
238
Hinged, detachable access door.
360
Extruded EPDM gasket between housing and door.
Electrical unit mounted on removable tray.
200 470
Optics
Faceted aluminium reflectors with very wide (V2F/DA), wide (6x6), 545
Mounting via a heavy gauge steel trunnion with aiming degree indicator. 180° 150° 120° 180° 150° 120° 180° 150° 120° 180° 150° 120°
Insulation: Class I.
Approx. weight with ballast: 12 to 20kg. 0 0 0 0
90° 90° 90° 90°
Notes
The luminaire with the V2F/DA optical must be installed in such a way that 70 90 90 120
lamps.
The maximum power for the luminaires with SYM optical is 150W. 210 60° 270 60° 270 60° 360 60°
The luminaires can be supplied with ballasts for high pressure mercury or
metal halide lamps. 280 360 360 480
INTENSIDAD EN PLANOS VERTICALES, EN INTENSIDAD EN PLANOS VERTICALES, EN INTENSIDAD EN PLANOS VERTICALES, EN INTENSIDAD EN PLANOS VERTICALES, EN
CANDELAS POR 1000 LUMENES CANDELAS POR 1000 LUMENES CANDELAS POR 1000 LUMENES CANDELAS POR 1000 LUMENES
LONGITUDINAL LONGITUDINAL LONGITUDINAL LONGITUDINAL
TRANSVERSAL TRANSVERSAL TRANSVERSAL TRANSVERSAL
PRINCIPAL PRINCIPAL PRINCIPAL PRINCIPAL
PFE-400
CEI 34.21 /EN 60598-1, IEC 60598 – 230V 50Hz – Class I – IP66
Accessory
Description Pack Product
Qty Code
For illumination of building perimeters, patios and lobbies, corridors, loading 180° 150° 120°
120
bays, garages, pedestrian and vehicle underpasses, porches and arcades.
202
248
Technical specification
60
For high pressure sodium and metal halide lamps up to 150W (WM-175) and 0
Body 60
The housing of the WM-175 is die-cast aluminium in two pieces (housing WL-250BR
and door) and the WL-250BR comprises three pieces (base, front housing 197 120
and cover) in the same material. In both cases, the pieces are a dark bronze
colour, electrostatically sprayed with a polyester powder paint finish, 180 60°
Optics
327
Aluminium reflector. 300
0° 30°
Flat tempered glass lens sealed with silicone to the cover in the WL-250BR INTENSIDAD EN PLANOS VERTICALES, EN
Assembly PRINCIPAL
Notes
Description Lamp ILCOS code Weight Pack Product Description Lamp ILCOS code Weight Pack Product
The luminaires may incorporate a photoelectric control unit. Supplied (kg) Qty Code (kg) Qty Code
separately.
Reference PEK-240. WL-250BR HPS 70W ST-70-H-E27-72/156 7.70 1 519486 WM-175 HPS 50W SE-50-H-E27-72/156 5.85 1 519497
WL-250BR HPS 100W ST-100-H-E40-48/211 8.10 1 519487 WM-175 HPS 70W SE-70-H-E27-72/156 5.00 1 519498
WL-250BR HPS 150W ST-150-H-E40-48/211 8.10 1 519488 WM-175 HPS 100W ST-100-H-E40-48/211 5.85 1 519499
WL-250BR HPS 250W ST-250-H-E40-48/260 9.10 1 519489 WM-175 HPS 150W ST-150-H-E40-48/211 6.30 1 519500
WL-250BR CMH 150 T U MT/UB-150-H-E40-48/209 8.60 1 519490 WM-175 MH 70W MT-70-H-E27-37/156 5.40 1 519501
WL-250BR CMH 250 T U MT/UB-250-H-E40-48/260 9.10 1 519491 WM-175 MH 100W MT-100-H-E40-48/209 5.85 1 519502
WM-175 CMH 150 T U MT/UB-150-H-E40-48/209 6.75 1 519504
WM-175 MH 150W MT-150-H-E40-48/209 6.30 1 519503
Accessories
Description Pack Product
Qty Code
For illuminating building perimeters, patios and lobbies, corridors, loading 180° 150° 120°
180
bays, garages, pedestrian and vehicle underpasses, porches and arcades.
327
Technical specification
90
For high pressure sodium and metal halide lamps up to 70W (WL-70) and 0
optional. WL-70
The WL-70 has a one-piece polycarbonate front housing, with the upper part 133
270
171 60°
in a dark bronze colour, and the rear part (base) in die-cast aluminium.
Ballast incorporated in the base of the luminaire. 360
Optical assembly
Aluminium reflector. 450
279
0° 30°
EPDM gaskets between lens and housing (WL-175) and between housing
CANDELAS POR 1000 LUMENES
LONGITUDINAL
Mounting
Direct wall mounting.
Degree of protection: IP55.
WL-175 WL-70
Insulation: Class I.
Approximate weight with ballast: 3kg for the WL-70 and 6 to 9kg for the CEI 34.21 /EN 60598-1, IEC 60598 – 230V 50Hz – Class I – IP55 CEI 34.21 /EN 60598-1, IEC 60598 – 230V 50Hz – Class I – IP55
WL-175.
Maintenance Description Lamp ILCOS code Weight Pack Product Description Lamp ILCOS code Weight Pack Product
Front access to the lamp and control gear. (kg) Qty Code (kg) Qty Code
Notes WL-175 HPS 50W SE-50-H-E27-72/156 6.00 1 519492 WL-70 HPS 50W BF SE-50-H-E27-72/156 1.80 1 519505
For the WL-175, an internal glare control louvre is available. Option P. WL-175 HPS 70W SE-70-H-E27-72/156 5.60 1 519493 WL-70 HPS 70W BF SE-70-H-E27-72/156 1.80 1 519506
A photoelectric control unit is available for incorporating into the WL-175 WL-175 HPS 100W ST-100-H-E40-48/211 6.30 1 519494 WL-70 MH 70W BF MT-70-H-E27-37/156 1.80 1 519507
luminaire. Supplied separately. Reference PEK-240. WL-175 HPS 150W ST-150-H-E40-48/211 7.20 1 519495
The WL-70 is supplied as low power factor version. Consult us for the high WL-175 CMH 150 T U MT/UB-150-H-E40-48/209 7.20 1 519496 Accessory
power option (HPF).
For the WL-70, the 70W metal halide lamps must use BD54 bulbs. It is Description Pack Product
recommended that diffuser lamps be fitted to this luminaire. Qty Code
Contact GE Sales office about availability of fittings with other light sources DOOR ASSEMBLY WM-175 1 290025
(compact fluorescent, low pressure sodium).