Documente Academic
Documente Profesional
Documente Cultură
Coils
Sheets
Content
Ilyich Iron and Steel Hot rolled coils and sheets
Works of Mariupol
according to Ukrainian and the CIS standards . . . 06
according to European standards . . . . . . . . . . . . . 08
according to American standards . . . . . . . . . . . . . 09
Galvanized steel
Tin plate
3 | w w w. m e t i n v e s t h o l d i n g . c o m back to content
Ilyich Iron and Steel Works of Mariupol
Ilyich Iron and Steel Works of Mariupol (Ilyich I&SW of Mariupol) is one of Ukraine’s largest
integrated steel production plants. Ilyich I&SW of Mariupol produces flat rolled steel and pipes
made of carbon, low-alloy and alloy steel, including hot rolled, cold rolled and galvanized coils
and plates/sheets used for welded pipes, structural steel, and sections for railcar manufacturing.
The plant holds 50 product quality certificates from seven internationally recognized certification
agencies that cover its range of steel products manufactured from more than 200 steel grades.
The plant has also obtained certificates from Ukrainian certification institutions. Ilyich I&SW of
Mariupol has a quality management system in place that was designed and certified according to
the requirements of ISO 9001.
hot rolled coils Ilyich I&SW of Mariupol
and sheets
According to Ukrainian and the CIS standards
Standard or technical Delivery
Application condition Standard for steel grade Steel grade (class) Thickness х width, mm condition
1.8-1.9 х 1000-1150
2.0-2.2 х 1000-1330
2.3-2.4 х 1000-1380
ST1KP, ST1PS, ST1SP,
2.5-2.7 х 1000-1430
ST2KP, ST2PS, ST2SP
2.8-2.9 х 1000-1450
(ОК300V)
3.0-3.4 х 1000-1480
3.5-3.7 х 1000-1500
3.8-3.9 х 1000-1530
2.0-2.2 х 1000-1180
DSTU 2651 /
2.3-2.4 х 1000-1230 AR
GOST 380-95
ST3KP, ST3PS, ST3SP 2.5-2.7 х 1000-1280
(ОК360V) 2.8-2.9 х 1000-1330
ST3SP (ОК370) 3.0-3.4 х 1000-1380
3.5-3.7 х 1000-1430
3.8-3.9 х 1000-1480
2.0-2.4 х 1000
ST4PS, ST4SP,
2.5-2.8 х 1000-1060
ST5PS, ST5SP
3.0-3.2 х 1000-1200
(ОК 400V)
3.5-3.9 х 1000-1250
1.8-1.9 х 1000-1150
2.0-2.2 х 1000-1330
2.3-2.4 х 1000-1380
2.5-2.7 х 1000-1430
08KP (К260V)
2.8-2.9 х 1000-1450
3.0-3.4 х 1000-1480
DSTU 2834-94 / 3.5-3.7 х 1000-1500
GOST 16523-97 3.8-3.9 х 1000-1530
Quality carbon steel for general
(technical conditions)
applications 1.8-1.9 х 1000-1150
GOST 19903
(product range) 2.0-2.2 х 1000-1330
2.3-2.4 х 1000-1380
2.5-2.7 х 1000-1430
08, 08PS (К270V)
2.8-2.9 х 1000-1450
3.0-3.4 х 1000-1480
3.5-3.7 х 1000-1500
3.8-3.9 х 1000-1530
1.8-1.9 х 1000-1150
GOST 1050-95 2.0-2.2 х 1000-1330 AR
2.3-2.4 х 1000-1380
10KP, 10PS, 10SP 2.5-2.7 х 1000-1430
(К310V) 2.8-2.9 х 1000-1450
3.0-3.4 х 1000-1480
3.5-3.7 х 1000-1500
3.8-3.9 х 1000-1530
2.0-2.2 х 1000-1180
2.3-2.4 х 1000-1230
2.5-2.7 х 1000-1280
15KP, 15PS, 15SP
2.8-2.9 х 1000-1330
(К330V)
3.0-3.4 х 1000-1380
3.5-3.7 х 1000-1430
3.8-3.9 х 1000-1480
2.0-2.2 х 1000-1180
2.3-2.4 х 1000-1230
20KP, 20PS (К350V)
2.5-2.7 х 1000-1280
2.8-2.9 х 1000-1330
The hot rolled coils’ inner diameter is 700±50 mm, outer diameter is 900-1400 mm and mass is up to 10 t. Sheets (cut from coils) are 2-3.9 mm thick, 2-4 m long and 4-8 mm thick, 4-6 m
long. The weight of sheet packages is up to 10 t. The sizes of coils and sheets shall be agreed upon during the conclusion of contracts.
AR – as rolled
3.0-3.4 х 1000-1380
DSTU 2834-94 / GOST 20KP, 20PS (К350V) 3.5-3.7 х 1000-1430
16523-97 3.8-3.9 х 1000-1480
(technical conditions) GOST 1050-95 2.0-2.4 х 1000 AR
GOST 19903 20 (К350V), 25 (К390V),
2.5-2.8 х 1000-1060
(product range) 30 (К390V), 35 (К490V),
Quality carbon steel for general 3.0-3.2 х 1000-1200
40 (К490V),45 (К490V)
applications 3.5-3.9 х 1000-1250
ST2KP, ST2PS, ST2SP
GOST 14637-89 ST3KP, ST3PS, ST3SP 4.0-8.0 х 1000-1540
(technical conditions) DSTU 2651 / GOST ST3GPS, ST3GSP AR or N
GOST 19903-74 380-95
(product range) 4.0-4.5 х 1000-1430
ST5PS, ST5SP
4.6-8.0 х 1000-1540
08,08KP,08PS
GOST 1577-93 10KP, 10PS, 10SP
4.0-8.0 х 1000-1540
(technical conditions) 15KP, 15PS, 15SP
Quality structural steel GOST 1050-95 20KP, 20PS, 20SP AR or N
GOST 19903-74
product range) 4.0-4.5 х 1000-1430
25, 30, 35,40, 45
4.5-6.0 х 1000-1430
1.8-1.9 х 1000-1150
2.0-2.2 х 1000-1330
2.3-2.4 х 1000-1380
2.5-2.7 х 1000-1430
S185JR 2.8-2.9 х 1000-1450
3.0-3.4 х 1000-1480
3.5-3.7 х 1000-1500
3.8-3.9 х 1000-1530
4.0-8.0 х 1000-1540
2.0-2.2 х 1000-1180
2.3-2.4 х 1000-1230
2.5-2.7 х 1000-1280
S235JR, S235J0, 2.8-2.9 х 1000-1330 AR or N
S235J2 3.0-3.4 х 1000-1380
3.5-3.7 х 1000-1430
DSTU EN 10025-2 3.8-3.9 х 1000-1480
(technical conditions) 4.0-8.0 х 1000-1540
Non-alloyed structural steel DSTU EN 10025-2
EN 10051 2.0-2.2 х 1000-1180
(product range) 2.3-2.4 х 1000-1230
2.5-2.7 х 1000-1280
S275JR, S275J0, 2.8-2.9 х 1000-1330
S275J2 3.0-3.4 х 1000-1380
3.5-3.7 х 1000-1430
3.8-3.9 х 1000-1480
4.0-8.0 х 1000-1540
2.0-2.2 х 1000-1060
2.3-2.4 х 1000-1120
2.5-2.7 х 1000-1160
2.8-2.9 х 1000-1200
S355JR, S355J0,
3.0-3.4 х 1000-1250 AR or N
S355J2, S355J2C
3.5-3.7 х 1000-1310
3.8-3.9 х 1000-1400
4.0-4.9 х 1000-1430
5.0-8.0 х 1000-1500
The hot rolled coils’ inner diameter is 700±50 mm, outer diameter is 900-1400 mm and mass is up to 10 t. Sheets (cut from coils) are 2-3.9 mm thick, 2-4 m long and 4-8 mm thick, 4-6 m
long. The weight of sheet packages is up to 10 t. The sizes of coils and sheets shall be agreed upon during the conclusion of contracts.
AR – as rolled
N- normalizing rolling
7 | w w w. m e t i n v e s t h o l d i n g . c o m back to content
hot rolled coils Ilyich I&SW of Mariupol
and sheets According to Ukrainian and the CIS standards
Standard or technical Delivery
Application condition Standard for steel grade Steel grade (class) Thickness х width, mm condition
2.0-2.2 х 1000-1060
2.3-2.4 х 1000-1120
GOST 17066
2.5-2.7 х 1000-1160
(technical conditions) 09G2, 09G2S (325, 345)
GOST 19281 2.8-2.9 х 1000-1200
GOST 19903-74 10HNDP (345)
3.0-3.4 х 1000-1250
(product range)
3.5-3.7 х 1000-1310
3.8-3.9 х 1000-1400
High strength steel AR
4.0-4.9 х 1000-1430
09G2, 09G2S (325, 345)
GOST 19281 5.0-8.0 х 1000-1500
(technical conditions) 4.0-4.9 х 1000-1430
GOST 19281 10HNDP (345)
GOST 19903-74 5.0-8.0 х 1000-1500
(product range) 4.0-4.9 х 1000-1430
10HSND (345, 390)
5.0-8.0 х 1000-1500
08KP,08PS,08SP
10KP, 10PS, 10SP
GOST 4041-71 15KP, 15PS, 15SP 4.0-6.0 х 1000-1500
Quality structural steel for cold (technical conditions) 20KP, 20PS, 20SP
GOST 1050-95 AR
forming GOST 19903-74 08U, 08UA
(product range)
4.0-4.5 х 1000-1430
25, 30, 35, 40, 45
4.0-6.0 х 1000-1430
ST1KP, ST1PS, ST1SP,
ST2KP, ST2PS, ST2SP,
ST3KP, ST3PS, ST3SP,
DSTU 2651 / ST4KP, ST4PS, ST4SP,
GOST 8568 4.0-8.0 х 1000-1500
GOST 380-95, 08KP,08PS,08SP
Corrugated steel (technical conditions, 10KP, 10PS, 10SP AR
GOST 1050-95,
product range) 15KP, 15PS, 15SP
GOST 19281-89
20KP, 20PS, 20SP
4.0-4.9х1000-1400
09G2S
5.0-8.0х1000-1540
2.0-2.2 х 1000-1180
2.3-2.4 х 1000-1230
DIN 17100-1980
2.5-2.7 х 1000-1280
(technical conditions)
Quality carbon steel for general 2.8-2.9 х 1000-1330
DIN 1016-86, DIN 17100-1980 St 37-2 AR
applications 3.0-3.4 х 1000-1380
DIN 1543-81
3.5-3.7 х 1000-1430
(product range)
3.8-3.9 х 1000-1480
4.0-8.0 х 1000-1540
1.8-1.9 х 1000-1150
2.0-2.2 х 1000-1330
EN 10025-2
2.3-2.4 х 1000-1380
(technical conditions)
Non-alloyed structural steel EN 10025-2 S185JR 2.5-2.7 х 1000-1430 AR or N
EN 10051
2.8-2.9 х 1000-1450
(product range)
3.0-3.4 х 1000-1480
3.5-3.7 х 1000-1500
The hot rolled coils’ inner diameter is 700±50 mm, outer diameter is 900-1400 mm and mass is up to 10 t. Sheets (cut from coils) are 2-3.9 mm thick, 2-4 m long and 4-8 mm thick, 4-6 m
long. The weight of sheet packages is up to 10 t. The sizes of coils and sheets shall be agreed upon during the conclusion of contracts.
AR – as rolled
3.8-3.9 х 1000-1530
S185JR
4.0-8.0 х 1000-1540
2.0-2.2 х 1000-1180
2.3-2.4 х 1000-1230
2.5-2.7 х 1000-1280
S235JR, S235J0, 2.8-2.9 х 1000-1330
S235J2 3.0-3.4 х 1000-1380
3.5-3.7 х 1000-1430
3.8-3.9 х 1000-1480
4.0-8.0 х 1000-1540
2.0-2.2 х 1000-1180
EN 10025-2 2.3-2.4 х 1000-1230
(technical conditions) 2.5-2.7 х 1000-1280
Non-alloyed structural steel EN 10025-2 S275JR, S275J0, 2.8-2.9 х 1000-1330 AR or N
EN 10051
(product range) S275J2 3.0-3.4 х 1000-1380
3.5-3.7 х 1000-1430
3.8-3.9 х 1000-1480
4.0-8.0 х 1000-1540
2.0-2.2 х 1000-1060
2.3-2.4 х 1000-1120
2.5-2.7 х 1000-1160
2.8-2.9 х 1000-1200
S355JR, S355J0,
3.0-3.4 х 1000-1250
S355J2, S355J2C
3.5-3.7 х 1000-1310
3.8-3.9 х 1000-1400
4.0-4.9 х 1000-1430
5.0-8.0 х 1000-1500
1,8-1,9 х 1000-1150
2,0-2,2 х 1000-1330
2,3-2,4 х 1000-1380
EN 10111
2,5-2,7 х 1000-1430
Low-alloyed steel for cold (technical conditions) DD11, DD12, DD13,
EN 10111 2,8-2,9 х 1000-1450 AR or N
forming EN 10051 DD14
3,0-3,4 х 1000-1480
(product range)
3,5-3,7 х 1000-1500
3,8-3,9 х 1000-1530
4,0-8,0х1000-1500
2.0-2.2 х 1000-1180
2.3-2.4 х 1000-1230
ASTM A36/A36M 2.5-2.7 х 1000-1280
(technical conditions) 2.8-2.9 х 1000-1330
Structural carbon steel ASTM A36/A36M ASTM A36/A36M AR
ASTM A6/A6M 3.0-3.4 х 1000-1380
(product range) 3.5-3.7 х 1000-1430
3.8-3.9 х 1000-1480
4.0-8.0х1000-1540
The hot rolled coils’ inner diameter is 700±50 mm, outer diameter is 900-1400 mm and mass is up to 10 t. Sheets (cut from coils) are 2-3.9 mm thick, 2-4 m long and 4-8 mm thick, 4-6 m
long. The weight of sheet packages is up to 10 t. The sizes of coils and sheets shall be agreed upon during the conclusion of contracts.
AR – as rolled
N- normalizing rolling
9 | w w w. m e t i n v e s t h o l d i n g . c o m back to content
cold rolled coils Ilyich I&SW of Mariupol
and sheets
According to Ukrainian and the CIS standards
Standard or technical
Application condition Standard for steel grade Steel grade (class) Thickness х width, mm
0.5-0.6 х 950-1090
ST1KP, ST1PS, ST1SP,
0.61-1.2 х 950-1270
ST2KP, ST2PS, ST2SP
1.21-2.0 х 950-1400
0.7 х 950-1120
0.8 х 950-1170
0.9-1.0 х 950-1220
DSTU 2834-94 / ST3KP, ST3PS, ST3SP
DSTU 2651 / GOST 380-95 1.1-1.2 х 950-1270
GOST 16523-97 1.21-1.6 х 950-1320
(technical conditions) 1.61-2.0 х 950-1370
Quality carbon steel for general
GOST 9045-93
applications 1.0-1.3 х 950
(technical conditions)
GOST 19904 ST4KP, ST4PS, ST4SP, 1.4-1.5 х 950-1000
(product range) ST5PS, ST5SP 1.6-1.8 х 950-1140
1.9-2.0 х 950-1190
The cold rolled coils’ inner diameter is 600±20 mm, outer diameter is up to 1300 mm and mass is up to 9 t. For heavy coils with welded seam the outer diameter is up to 1700 mm and
mass is up to 14.5 t. Sheets (cut from coils) are 0.5 thick, 2.5 m long and 0.6-2.0 mm thick, 4 m long. The weight of sheet packages is up to 8 t. The sizes of coils and sheets shall be agreed
upon during the conclusion of contracts.
0.5-0.7 х 950-1270
EN 10130
0.71-0.8 х 950-1320
Low-alloyed steel for cold (technical conditions)
EN 10130 DC01 0.81-0.9 х 950-1370
forming EN 10131
0.91-1.2 х 950-1390
(product range)
1.21-2.0 х 950-1425
The cold rolled coils’ inner diameter is 600±20 mm, outer diameter is up to 1300 mm and mass is up to 9 t. For heavy coils with welded seam the outer diameter is up to 1700 mm and
mass is up to 14.5 t. Sheets (cut from coils) are 0.5 thick, 2.5 m long and 0.6-2.0 mm thick, 4 m long. The weight of sheet packages is up to 8 t. The sizes of coils and sheets shall be agreed
upon during the conclusion of contracts.
galvanized steel
According to Ukrainian and the CIS standards
Standard or technical
Application condition Standard for steel grade Steel grade (class) Thickness х width, mm
0.4-0.45 х 950-1000
EN 10346
DX51D 0.5 х 950-1250
(technical conditions)
Hot dip galvanized steel EN 10346 0.55-1.6 х 1000-1250
EN 10143
(product range) S320GD, S350GD 0.75-1.5 х 1000-1250
The galvanized coils’ inner diameter is 600±20 mm, outer diameter is up to 1300 mm and mass is up to 8 t. Zinc coating is done according to GOST 14918 (1, 2 class). The sizes of coils and
sheets along with zinc coating class shall be agreed upon during the conclusion of contracts.
11 | w w w. m e t i n v e s t h o l d i n g . c o m back to content
back to content
Zaporizhstal Iron and Steel Works
Zaporizhstal Iron and Steel Works is one of Ukraine’s largest industrial enterprises, with products
that are highly regarded by local and international customers. The plant specializes in high-quality
hot rolled coils and hot rolled sheets, cold rolled sheets and cold rolled coils with thicknesses of
0.5-8.0 mm that are produced from carbon and low-alloy steel as well as cut steel strips and tin
plates.
Its customers are mainly producers of welded pipes, automobile manufacturers, agricultural and
transport engineering companies, household appliance manufacturers, and steel service centers.
Metinvest, together with a team of investors, became the owner of 50.0032% of Zaporizhstal in
July 2012.
back to content
hot rolled coils Zaporizhstal I&SW
and sheets
According to Russian and Ukrainian standards
Technical condition or
Application standard Steel grade (class) Thickness, mm Width, mm Length, mm
Technical condition or
Application standard Steel grade (class) Thickness, mm Width, mm Length, mm
4.0-6.0 2000-6000
GOST 14637-89 St 2-3kp(ps), St 4ps 1000-1500
6.1-8.0 2000-4000
15 | w w w. m e t i n v e s t h o l d i n g . c o m back to content
cold rolled coils Zaporizhstal I&SW
and sheets
According to Russian and Ukrainian standards
Technical condition or
Application standard Steel grade (class) Thickness, mm Width, mm Length, mm
Technical condition or
Application standard Steel grade (class) Thickness, mm Width, mm Length, mm
tin plate
According to Russian and Ukrainian standards
Technical condition or
Application standard Steel grade (class) Thickness, mm Width, mm
17 | w w w. m e t i n v e s t h o l d i n g . c o m back to content
Ferriera Valsider spa
Ferriera Valsider SpA is Metinvest’s steel mill in Verona (Italy). Ferriera Valsider SpA produces
structural steel (plates and hot rolled coils) at two production lines. 80-90% of its steel slabs used
as feedstock are supplied by Azovstal. Ferriera Valsider’s products are used in a wide range of
steel-consuming industries, such as construction, shipbuilding, boiler and pressure vessel manu-
facturing, and pipe and guardrail production. The plant’s hot rolled coil production capacity is
600,000 tons p.a.
hot rolled coils Ferriera Valsider SPA
and sheets
According to European standards
S235JR
S235J0
S235J2
S275JR
S275J0
Non-alloy structural steel EN 10025-2 2-20 11.5-29.0 AR + N + M
S275J2
S355JR
S355J0
S355J2
S355K2
C35
C35+Cr
C35E
C40
Non-alloy structural steel for
EN 10083-2 C40E
queching and tempering
C45
C45E 3-20 11.5-25.0 AR
C45+CR
28Mn6
30MnB5
Boron steel for quenching and 27MnCrB5-2 1000-1555*
EN 10083-3
tempering 33MnCrB5-2
34CrMo4
S355J0WP
3-12
S355J2WP
Structural steel with improved
EN 10025-5 S355J0W 11.5-25.0 AR + N
atmospheric corrosion resistance
S355J2W 3-15
S355K2W
P235GH
Boiler and pressure vessel steel EN 10028-2 3-12
P265GH
P275NH 11.5-25.0 N
Welsable fine grain steel,
EN 10028-3 P275NL1 3-8
normalized
P275NL2
S275M 3-12
S275ML 3-8
S355M 3-15
Weldable fine grain steel, S355ML 3-10
EN 10025-4 11.5-15.0 M
thermomechanically rolled S420M 3-10
S420ML 3-10
S460M 4-6
S460ML 4-6
21 | w w w. m e t i n v e s t h o l d i n g . c o m back to content
hot rolled coils Ferriera Valsider SPA
and sheets
According to American standard
A1011 SS 55 3-6
11.5-15
A1011 SS 60 3-6
A1018 SS 30 6-20
Structural steel A1018 SS 33 6-20
A1018 SS 36 type 1 6-20
A1018 SS 36 type 2 6-20
A1018 SS 40 6-20
A285 gr. A 3-8
A285 gr. B 3-15
A285 gr. C 3-15
Boiler and pressure vessel steel
A516 gr. 55 3-12
A516 gr. 60 3-8 11.5-25.0
A516 gr. 65 3-8
Low-Aalloy Columbiom structural
A572 gr.42 type 1 3-20
steel
A588 gr. A 3-15
Structural steel with improved A588 gr. B 3-15
atmospheric corrosion resistance A588 gr. K 3-15
A242 Type 1 3-12
Structural steel for bridges with A709 gr. 50W Type A 3-15
improved atmospheric corrosion
resistance ASTM/ASME A709 gr. 50W Type B 3-15 1000-1555* AR
A1011 HSLAS 45 cl.1 3-12 11.5-25.0
A1011 HSLAS 50 cl.1 3-12
A1011 HSLAS 55 cl.1 3-12
A1011 HSLAS 60 cl.1 3-12
A1011 HSLAS 45 cl.2 3-12
A1011 HSLAS 50 cl.2 3-12
A1011 HSLAS 55 cl.2 3-12
A1011 HSLAS 60 cl.2 3-12
High-Strenght Low-Alloy Steel
A1018 HSLAS 45 cl.1 6-12
A1018 HSLAS 50 cl.1 6-12
A1018 HSLAS 55 cl.1 6-12 11.5-15
A1018 HSLAS 60 cl.1 6-12
A1018 HSLAS 45 cl.2 6-12
A1018 HSLAS 50 cl.2 6-12
A1018 HSLAS 55 cl.2 6-12
A1018 HSLAS 60 cl.2 6-12
A1011 HSLAS-F 50 3-12
High-Strenght Low-Alloy Steel A1011 HSLAS-F 60 3-12
with Improved Formability A1018 HSLAS-F 50 6-12
A1018 HSLAS-F 60 6-12
w w w. m e t i n v e s t h o l d i n g . c o m | 23
CONTACTS
EUROPE
Metinvest Western Europe Metinvest South-East Europe
Via XII Ottobre, 3 1 Dobrudzha Str., 1000 Sofia, Bulgaria
16121 Genova, Italy tel.: +359 886 007 204
tel.: +39 010 576 29 11 office.sofia@promet.bg
fax: +39 010 576 29 90
sales@metinvest-westerneurope.com
CIS
Metinvest-SMC Metinvest Distribution
Retail sales in Ukraine Sales to Belarus
15A Leiptsyzka str., Kyiv, 2 Tolbukhina St., Office 30, Minsk,
01015, Ukraine 220012, Belarus
tel. 0800303070, +38 (044) 581 44 37 tel. + 37 (517) 336 55 56
sales@metinvest-smc.com
Metinvest Eurasia
Wholesale and retail sales in Russia
17 Vereyskaya St, Office 105, Moscow,
121357, Russia
tel. + 7 (495) 739 26 26
sales@metinvest-eurasia.com
WORLD
Metinvest International SA
International export sales (outside the CIS and Ukraine)
2 Rue Vallin, Geneva
1201, Switzerland
tel. +41 22 906 18 28
sales@metinvest-international.com
WEBSITE