Documente Academic
Documente Profesional
Documente Cultură
Desarmado y Armado
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Engine
Supplement
Fecha de publicación
Número de medio -RENR8863-01 Fecha de actualización -04/12/2006
-01/12/2006
i02355578
Engine - Install
SMCS - 1000-012
Installation Procedure
Table 1
Required Tools
A 189-0411 Shackle As 1
1. Use Tooling (B) and a suitable lifting device to position engine (28) onto the
machine. The weight of engine (28) is approximately 862 kg (1900 lb).
g01176610
Illustration 2
3. Apply Tooling (C) to bolts (29). Install bolts (29) and tighten bolts (29) to a
torque of 70 ± 15 N·m (52 ± 11 lb ft).
g01176603
Illustration 4
Illustration 5 g01176606
6. Install connector (26) and connect tube assembly (27) if the machine is equipped
with an axle oil cooler.
g01176604
Illustration 6
7. Install belt (25). Refer to Operation and Maintenance Manual, "Belts - Remove /
Adjust / Replace".
g01176602
Illustration 7
9. Connect hose (22) if the machine is equipped with an axle oil cooler.
g01176599
Illustration 9
g01176597
Illustration 10
12. Install cover (18) and nut (17) .
g01176596
Illustration 11
g01176595
Illustration 12
Illustration 13 g01176594
15. Connect cable assembly (12) and the mounting hardware.
g01176592
Illustration 14
g01176591
Illustration 15
g01176589
Illustration 17
g01176588
Illustration 18
22. If the machine is equipped with an axle oil cooler, connect hose assemblies (4) .
g01176585
Illustration 20
Illustration 21 g01176584
25. Install guard assembly (1) .
End By:
a. Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and
Install".
b. Install the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank
- Install".
c. Install the cooling system package. Refer to Disassembly and Assembly,
"Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Install".