Sunteți pe pagina 1din 2

4-559-899-13(1)

Basic Operations
 Folder names can be displayed with up to 32 characters, 4 Touch the unit with the smartphone.
including quotation marks.
Listening to music wirelessly on a Keep touching the smartphone to the N mark  Listening to the radio
 File names can be displayed with up to 32 characters, on the unit until the smartphone responds.
including quotation marks and file extensions. BLUETOOTH device 1 Press FM/AM  repeatedly to turn on the
 Characters and symbols that cannot be displayed by the Note
unit will appear as “_”. Using the BLUETOOTH connection, you can listen to If your smartphone screen is locked, the smartphone will radio function and select the band “FM” or

Personal Audio System


not function. Release the lock, then touch the
 This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the music from wirelessly connected BLUETOOTH “AM.”
ID3 tag format for MP3 files, the WMA tag format defined smartphone to the N mark  again.
by the ASF specification (Advanced Systems Format) for
devices such as mobile phones, smartphones, music 2 Hold down TUNE + or   until the frequency
players, etc. Smartphone responds
WMA files, and the AAC tag format for AAC files. digits begin to change on the display.
(unit recognized)
Operating Instructions When a file has the ID3, WMA or AAC tag information, the
song title, artist name, and album name will be displayed.
The unit automatically scans the radio
frequencies and stops when it finds a clear
If a file does not have the tag information, the unit
station.
displays as follows:
 File name instead of the song title. If you cannot tune to a station using automatic
 “NO ARTIST” message instead of the artist name. tuning mode, press TUNE + or   repeatedly to
 “NO ALBUM” message instead of the album name. change the frequency step by step.
ID3, WMA and AAC tag information can be displayed up to When an FM stereo broadcast is received, “ST”
64 characters. lights up on the display.
Note
Follow the on-screen instructions to establish the The unit of frequency of tuned stations is MHz for the FM
Transferring music from a disc to a Pairing this unit with a
connection. band and kHz for the AM band.
©2014 Sony Corporation Printed in China *   and VOL +  have a tactile dot. When the BLUETOOTH connection is established,
USB device BLUETOOTH device “BT AUDIO” appears on the display. To change the FM/AM tuning interval
(This function is only available on models for some
 WMA files encoded in WMA DRM, WMA Lossless and
You can transfer a whole disc (CD SYNC transfer) or countries/regions. See the radio section in
ZS-RS60BT Before using the unit WMA PRO formats cannot be played back.
the currently playing track or file (REC1 transfer) to a
BLUETOOTH devices must be “paired” with each
other beforehand. Once BLUETOOTH devices are “Specifications.”)
 This unit cannot play audio files on a disc in the following
cases: USB device (digital music player or USB storage paired, there is no need for pairing again, unless the The FM/AM tuning interval can be changed if
To turn the power on or off  When the total number of audio files exceeds 999. media, etc.). pairing information is cleared. necessary using the following procedure.
Press OPERATE . You can also turn on the power  When the total number of folders on a single disc When transferring from a CD, the tracks are Choose the pairing method below depending on
exceeds 256 (including the “ROOT” folder). transferred as MP3 files with a sampling frequency
Tips 1 Press FM/AM  repeatedly to select a band.
Disposal of waste batteries and electrical and of this unit using the direct power-on function your device.  If it is difficult to establish the connection, try the
electronic equipment (applicable in the (below).  When the directory level (folder depths) exceeds 8 of 44.1 kHz at 128 kbps (CBR). When transferring following.
2 Hold down ENTER  until “FM-xx” or “AM-xx”
European Union and other European countries In this manual, operations are mainly explained
(including the “ROOT” folder). from an MP3/WMA disc, MP3/WMA files are Pairing with an NFC-incompatible BLUETOOTH  Activate the app “NFC Easy Connect” and move the flashes on the display.
with separate collection systems) using the direct power-on function.  Folder names can be displayed with up to 32 characters, transferred with the same bit rate as the original device: smartphone slightly across the N mark  on the 3 Hold down FM/AM  until the current tuning
including quotation marks. MP3/WMA files. see Pattern A unit.
This symbol on the product, the battery step appears.
 File names can be displayed with up to 32 characters,  If the smartphone is in a case, remove it.
or on the packaging indicates that the To use the direct power-on function 4 Press  or   to select the desired
including quotation marks and file extensions. 1 Connect the USB device to the  (USB) port . Pairing with an NFC-compatible smartphone:  Touch the unit with the smartphone again to
product and the battery shall not be Press CD , USB , BLUETOOTH , FM/AM , see Pattern B
treated as household waste. On certain
 Characters and symbols that cannot be displayed by the 2 Press CD  to turn on the CD function. disconnect. tuning step.
AUDIO IN  or FAVORITE RADIO STATIONS (1-3)  unit will appear as “_”.
batteries this symbol might be used in while the unit is turned off. The power turns on with  This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the
3 Place the disc you want to transfer in the CD  If you have multiple NFC-compatible devices, just “FM 50K” (for 50 kHz interval) or “FM 100K” (for
touch the smartphone to a different device to switch 100 kHz interval) in the FM band, and “AM 9K” (for
combination with a chemical symbol. the relevant function selected. ID3 tag format for MP3 files and the WMA tag format compartment. the connection to that device. For example, when your
The chemical symbols for mercury (Hg) or lead (Pb) defined by the ASF specification (Advanced Systems
Pattern A 9 kHz interval) or “AM 10K” (for 10 kHz interval) in
WARNING are added if the battery contains more than
To adjust the volume
Format) for WMA files. When a file has the ID3 or WMA tag ĄĄCD SYNC transfer
Pairing with an NFC-incompatible
smartphone is connected with NFC-compatible
headphones, just touch the smartphone to the unit to
the AM band can be selected.
0.0005% mercury or 0.004% lead. By ensuring these information, the song title, artist name, and album name To transfer a whole disc change the BLUETOOTH connection to the unit 5 Press ENTER .
Press VOL + or  . will be displayed. If a file does not have the tag BLUETOOTH device
To reduce the risk of fire or electric shock, do not products and batteries are disposed of correctly, you Proceed to step 4. (One-touch connection switching).
Changing the tuning interval erases all the FM/AM
information, the unit displays as follows: Keep the BLUETOOTH device and the unit within 1
expose this apparatus to rain or moisture. will help prevent potentially negative consequences preset stations stored in the unit. Reset your preset
 File name instead of the song title. meter of each other for this operation.
for the environment and human health which could To listen through headphones To transfer MP3/WMA files in a specific Listening to music stations after changing the tuning interval.
 “NO ARTIST” message instead of the artist name.
To reduce the risk of fire, do not cover the ventilation otherwise be caused by inappropriate waste Connect headphones to the  (headphones) jack
 “NO ALBUM” message instead of the album name.
folder 1 Press BLUETOOTH  to turn on the
opening of the appliance with newspapers, handling. The recycling of the materials will help to . Set the play mode to folder play ( ) or folder BLUETOOTH function. To improve radio reception
conserve natural resources. ID3 and WMA tag information can be displayed up to 64 Check the following before operating the unit.
tablecloths, curtains, etc. Do not expose the characters. repeat play ( , ), and then press  + or   If no devices have been paired, such as when you Use the radio in a place where
appliance to naked flame sources (for example, In case of products that for safety, performance or  The BLUETOOTH function of the BLUETOOTH
To reinforce the bass repeatedly to select the folder you want. press BLUETOOTH  for the first time after you device is turned on.
radio signals can be easily
lighted candles). data integrity reasons require a permanent received, such as near a window.
Press MEGA BASS . purchase the unit, the unit automatically enters
connection with an incorporated battery, this battery To transfer only your favorite tracks/files  Pairing has been completed. (See “Pairing this unit
To reduce the risk of fire or electric shock, do not “MEGA BASS” lights up on the display. pairing mode, and the BLUETOOTH indicator ( ) Also, adjust the antenna (FM) or
expose this apparatus to dripping or splashing, and
should be replaced by qualified service staff only. To
To return to normal sound, press the button again. Listening to music on a USB device Perform step 1 to 5 of “Creating your own and “PAIRING” flash on the display. with a BLUETOOTH device”.) reorient the unit itself (AM) for
ensure that the battery and the electrical and program (Program Play)” on the back page. good reception.
do not place objects filled with liquids, such as
vases, on the apparatus.
electronic equipment will be treated properly, hand You can listen to audio files stored on a USB device 1 Make the BLUETOOTH connection between
over these products at end-of-life to the applicable (a digital music player or USB storage media). ĄĄREC1 transfer the unit and the device. Adjust the antenna to
As the main plug is used to disconnect the unit from
the mains, connect the unit to an easily accessible
collection point for the recycling of electrical and Playing a music disc Audio files in MP3, WMA and AAC formats* can be To transfer a single track/file
improve FM reception. If the
electronic equipment. For all other batteries, please played on this unit. For an NFC-incompatible BLUETOOTH stereo FM reception is noisy,
AC outlet. Should you notice an abnormality in the view the section on how to remove the battery from Select and start playback of the track/file you device press FM MODE  repeatedly
unit, disconnect the main plug from the AC outlet
1 Press CD  to turn on the CD function. * Files with copyright protection (Digital Rights want to transfer. When pairing with two or more
the product safely. Hand the battery over to the Press BLUETOOTH  to turn on the BLUETOOTH until “MONO” appears on the
immediately. applicable collection point for the recycling of waste 2 Press PUSH OPEN/CLOSE  , place a disc in Management) cannot be played on this unit. BLUETOOTH devices display. You will lose the
4 Press REC . function.
batteries. For more detailed information about the CD compartment and then close the Hold down BLUETOOTH (–PAIRING)  until two stereo effect, but the
The unit is not disconnected from the AC power
recycling of this product or battery, please contact
1 Connect the USB device to the  (USB) port . “REC” flashes on the display and the unit starts The last connected device will be connected
source (mains) as long as it is connected to the wall compartment cover. beeps are heard. reception will be improved.
your local Civic Office, your household waste 2 Press USB  to turn on the USB function. calculating the amount of free space on the USB automatically.
outlet, even if the unit itself has been turned off. device.
disposal service or the shop where you purchased The volume label scrolls once, then the total
Do not install the appliance in a confined space,
2 Turn on the BLUETOOTH function of the For an NFC-compatible smartphone
the product or battery. number of folders appears on the display. Reorient the unit
such as a bookcase or built-in cabinet. BLUETOOTH device. Touch the smartphone to the N-Mark  on the
itself to improve AM
Label side up 3 Perform the pairing procedure on the unit.
Excessive sound pressure from earphones and For customers in the United Arab reception. (A ferrite
headphones can cause hearing loss. BLUETOOTH device to detect the unit. 2 Start playback of an audio source such as bar antenna is built
Emirates
Do not expose the batteries (battery pack or
4 Select “ZS-RS60BT” shown on the display of music, videos, games, etc., on the device. in the unit.)
batteries installed) to excessive heat such as Total number of folders If “LOW ***M” appears on the display, there is not the BLUETOOTH device. Refer to the instruction manual of your device for
sunshine, fire or the like for a long time. sufficient space on the device. To cancel the If “ZS-RS60BT” does not appear on the device’s details on playback operations. If the reception problem still persists, try changing
transferring, press  . To continue transferring display, repeat from step 2.
The nameplate is located on the bottom exterior. 3 Press   to start playback. Tip the installation location.
The disc is loaded and the disc information
The folder name and song title are displayed, and
anyway, proceed to step 5. 5 If Passcode* input is required on the display of To adjust the volume, set the volume of the BLUETOOTH Avoid places such as the following:
appears on the display.
then the file number and playing time appear. 5 Press ENTER . the BLUETOOTH device, input “0000.” device or the smartphone to the moderate level, and then
For customers in Europe press VOL  or +  on the unit.
Audio CD Transferring starts. The BLUETOOTH connection is established.
File number When transferring is completed, playback stops “BT AUDIO” appears on the display.
Notice for customers: the following Total number of tracks To terminate a BLUETOOTH connection
automatically (CD SYNC transfer) or proceeds to * “Passcode” may be referred to as “Passkey,” “PIN code,”
information is only applicable to equipment
the next track/file (REC1 transfer). “PIN number,” or “Password.” Do any of following.
sold in countries applying EU directives
This product has been manufactured by or on behalf Personal Audio System is designed to be used  Turn off the BLUETOOTH function of the Between
To stop transferring BLUETOOTH device. For details, refer to the buildings
of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, for playing back music sources on CDs or USB
108-0075 Japan. Inquiries related to product devices, transferring music to USB devices, Press  . operating instructions supplied with the device.
compliance based on European Union legislation listening to radio stations, and listening to music Playing time* When the transferring source is a CD-DA track, the  Turn off the BLUETOOTH device.
shall be addressed to the authorized representative, on BLUETOOTH devices. Total playing time audio file is generated up to the point the  Change the function of the unit.
* If the playing time is longer than 100 minutes, “--:--” transferring was stopped. When the source is an Nearby
Sony Belgium, bijkantoor van Sony Europe Limited, Tip  Turn off the unit.
MP3/WMA disc appears on the display. MP3 or WMA file, the file that is currently being You can pair up to 8 BLUETOOTH devices. If the 9th mobile
Da Vincilaan 7-D1, 1935 Zaventem, Belgium. For any  Touch the unit with the smartphone again to
transferred is not generated. BLUETOOTH device is paired, the oldest paired device will be phones,
service or guarantee matters, please refer to the Other operations disconnect (NFC-compatible smartphones only).
deleted. electrical
addresses provided in the separate service or
To Do this Folder and file generation rules appliances
guarantee documents. Notes To clear the paired device information
Pause playback Press  . To return to When first transferring to a USB device, a “MUSIC”
folder and its sub folder “SONY” are created directly  Pairing mode of the unit is cancelled after about 1 Hold down ERASE  until “BT RESET” appears
playback, press the button 5 minutes, and the BLUETOOTH indicator ( ) flashes. If
Total number of folders* again*. below the “ROOT” folder. pairing mode is cancelled while performing this on the display.
Folders and files are generated within the “CD” On steel desks
* If MP3/WMA files are present only in the root directory Stop playback Press  . When you press  folder under the “SONY” folder based on the
procedure, start over from step 1. 2 Press ENTER .
 The passcode of the unit is fixed as “0000.” The unit or tables
Power Sources (“ROOT” folder), “1FLDR” appears on the display.  after playback is stopped,
playback starts from the point
following rules. cannot be paired with a BLUETOOTH device whose
When the paired device information is cleared,
“COMPLETE” appears on the display. To cancel
3 Press   to start playback. Passcode is not “0000.”
the reset operation, press  .
where you stopped playback CD SYNC transfer
Connect the AC power cord , or insert six R14 (size C) batteries (not supplied) into the battery compartment . Track number or MP3/WMA file (Resume Play).
number
Transferring
Folder name File name Pattern B
Select a folder Press  + or  . source
Pairing with an NFC-compatible
Select a file Press  or  . You can MP3/WMA Same as the transferring source*1, 2
smartphone Presetting stations to FAVORITE
skip files one by one. CD-DA “ALBUM001”*3 “TRACK001”*4
To skip files continuously, hold
By just touching the unit with an NFC-compatible RADIO STATIONS
smartphone, the unit is turned on and switched to
down  or   and REC1 transfer
To a wall outlet the BLUETOOTH function automatically and then You can preset up to three favorite stations to
Playing time release the button at the desired
paired and connected to the smartphone. FAVORITE RADIO STATIONS (1-3) buttons. Assign one
file. Transferring
Folder name File name FM or AM program for each button.
source Compatible smartphones
AC power cord (supplied) To AC IN When you play an MP3/WMA disc, the folder Find a point in a Hold down  or  
name*1 and song title are displayed before the file during playback, and release the Same as the Smartphones with the NFC function built-in 1 Press FM/AM  repeatedly to turn on the
MP3/WMA transferring (OS: Android™ 2.3.3 or later, excluding Android 3.x)
playing time*2 appears. button at the desired point. “REC1”*5 radio function and select the band “FM” or
*1 If MP3/WMA files are present only in the root directory, When locating a point while source*2
What is “NFC”? “AM.”
“ROOT” appears on the display. paused, press   to start CD-DA “TRACK001”*4
*2 If the playing time is longer than 100 minutes, “--:--” playback after the desired point
NFC (Near Field Communication) is a 2 Tune to the station you want to preset.
technology enabling short-range wireless
Rear appears on the display. is found. *1 In Program Play mode, the folder name is “FLDRxxx,” and 3 Press and hold the desired FAVORITE RADIO
the file name depends on the transferring source. communication between various devices,
such as mobile phones and IC tags. Thanks to STATIONS (–SET) (1-3) button  until you hear
Other operations * When playing a VBR MP3/WMA/AAC file, playback may *2 Up to 32 characters (including a file extension for a file
restart from a different point. name) can be displayed. the NFC function, data communication can be a beep.
To Do this achieved easily just by touching the relevant The tuned station is preset to the selected button
*3 Folder names are assigned in sequential order up to a
Pause playback Press  . To return to Note maximum of 256 (including the “ROOT” and “MUSIC” symbol or designated location on NFC of FAVORITE RADIO STATIONS (1-3) and the same
playback, press the button When removing a USB device, hold down   until “NO folders). compatible devices. number as that of the button will light up on the
DEV” appears, and then turn off the unit or switch to other
again. *4 File names are assigned in sequential order. display.
functions beforehand. Removing the USB device without
*5 A new file is transferred to the “REC1” folder each time
Stop playback Press  . When you press  performing these steps may corrupt the data on the USB
 after playback is stopped, device or damage the device itself.
single track transfer is performed. 1 Turn on the NFC function of the smartphone. (Example: Presetting FM 87.50 MHz to number )
playback starts from the point For details, refer to the operating instructions
Example of folder structure and playing order To erase audio files or folders from the USB supplied with the smartphone.
where you stopped playback
The playing order of the folders and files is as device
(Resume Play).
follows. However, the playing order may differ from If your smartphone OS is Android 2.3.3 or
Notes Select a folder Press  + or  . the original order on the USB device, depending on
1 Press  or   repeatedly to select an
later, but earlier than Android 4.1
 When using the radio on batteries and the battery power drops to a certain level, the OPR/BATT indicator  dims or the power on an MP3/WMA the recording method used. audio file, or press  + or –  repeatedly to Proceed to step 2.
of the radio may go off during playback. If this happens, replace all the batteries with new ones. Even after the OPR/BATT disc select a folder.
indicator  becomes dim, you can use the radio function for some time, although you cannot use the CD player. Before you USB device
Select a track/ Press  or  . You can
Folder 2 Press ERASE . If your smartphone OS is Android 4.1 or To change the preset station
replace the batteries, be sure to remove any CD and disconnect any USB devices or optional components from the unit.
file skip tracks/files one by one. MP3/WMA/AAC file “ERASE?” appears on the display. later Repeat steps 1 to 3.
 To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.
Proceed to step 4. The preset station on the button will be replaced by
 In standby mode with the AC power cord connected, “STANDBY” appears on the display. Find a point in a Hold down  or   3 Press ENTER .
the new one.
track/file during playback, and release the “TRACK ERASE?” or “FOLDER ERASE?” appears on 2 Download and install the app “NFC Easy
To use the power-management function (European models only) button at the desired point. the display. Connect” on the smartphone.
This unit is equipped with an automatic standby function. With this function, the unit enters standby mode When locating a point while 4 Press ENTER . “NFC Easy Connect” is an original app by Sony for Listening to preset stations with
automatically after about 15 minutes if there is no operation or audio signal output. paused, press   to start The selected audio file or folder is erased, and Android phones, and is available at the Google
FAVORITE RADIO STATIONS
To turn standby mode on or off, press VOL   while holding down . Each time you press the buttons, playback after the desired point “COMPLETE” appears on the display. Play™ Store.
“AUTO STANDBY ON” or “AUTO STANDBY OFF” appears on the display. is found. Search for “NFC Easy Connect” or scan the
Notes Press the desired FAVORITE RADIO STATIONS (1-3)
following two-dimensional code to download button .
Notes  If you start transferring in shuffle play or repeat play and install the free app. Communication fees are
Tip
 The displayed content starts flashing on the display about 2 minutes before entering standby mode. mode, the selected play mode is automatically changed required to download the app. Note
To cancel the Resume Play, press   while the CD is
 The automatic standby function is not available with the FM/AM function. to normal play. To prevent the preset from being changed by mistake, do
stopped. The App may not be available in some countries
 Do not remove the USB device during transferring or erase not hold down the button. If doing so, the preset on the
Note operations. Doing so may corrupt the data on the device and/or regions.
button will be replaced by the currently tuned station.
Resume Play is cancelled in the following cases: or damage the device itself.
Tip
 When you open the CD compartment.  While transferring, no sound is output and “HI-SPEED”
For some smartphones, One-touch connection may be
 When you turn off the power. appears on the display.
available without downloading the app “NFC Easy
 CD-TEXT information is not transferred in the created MP3 Connect.” In that case, the operation and specifications
Example of folder structure and playing order Notes on the USB device files. may be different from the description here. For details,
The playing order of the folders and files is as  Transferring stops automatically if: refer to the operating instructions supplied with the
 It may take a long time before playback starts when:
follows. However, the playing order may differ from  the USB device runs out of space during transferring. smartphone.
 the folder structure is complex.
the original order on the disc, depending on the  the number of audio files and folders on the USB device
 the USB device is close to capacity.
recording method used. reaches the limit that the unit can recognize. For the two-dimensional code:
 Do not save non-MP3/WMA/AAC files or unnecessary
folders to a USB device that contains MP3/WMA/AAC files.  Non-MP3/WMA/AAC format files or sub folders in the Use a two-dimensional code reader app.
Folder folder are not erased.
 During playback, audio files other than MP3, WMA and
MP3/WMA file AAC files are skipped even if those files are included in a  Radio sound and sound from an optional component
folder. cannot be transferred to a USB device.
 The audio formats supported by this unit are as follows: Note on copyright-protected content
 MP3: file extension “.mp3” The transferred music is limited to private use only. Use of
 WMA: file extension “.wma” the music beyond this limit requires permission from the
 AAC: file extension “.m4a,” “.3gp” and “.mp4” copyright holders.
Note that even if the file name has the correct file
extension but the actual file was created in a different 3 Start the app “NFC Easy Connect” on the
audio format, this unit may produce noise or may
malfunction. smartphone.
 MP3 PRO format is not supported. Make sure that the application screen is
 WMA files encoded in WMA DRM, WMA Lossless and
displayed.
WMA PRO formats cannot be played back.
 AAC files encoded in copyright-protected AAC format
cannot be played back.
 This unit supports the AAC-LC (AAC Low Complexity)
profile.
 This unit cannot play audio files on a USB device in the
following cases:
Notes on MP3/WMA discs  When the total number of audio files in a single folder
 When a disc is loaded, the unit reads all the files on that exceeds 999.
disc. During this time, “READING” is flashing. If there are  When the total number of audio files on a single USB
many folders or non-MP3/WMA files on the disc, it may device exceeds 5,000.
take a long time for play to begin or for the next MP3/  When the total number of folders on a single USB
WMA file to start to play. device exceeds 256 (including the “ROOT” folder).
 We recommend that non-MP3/WMA files or unnecessary  When the directory level (folder depths) exceeds 8
folders are excluded when creating MP3/WMA discs. (including the “ROOT” folder).
 During playback, audio files other than MP3 and WMA These numbers may vary depending on the file and folder
files are skipped even if those files are included in a folder. structure.
 The audio formats supported by this unit are as follows:  Compatibility with all encoding/writing software is not
 MP3: File extension “.mp3” guaranteed. If audio files on the USB device were
 WMA: File extension “.wma” originally encoded with incompatible software, those files
Note that even if the file name has the correct file may produce noise or interrupted sound, or may not be
extension but the actual file was created in a different played back at all.
audio format, this unit may produce noise or may
malfunction.
 MP3 PRO format is not supported.
4 Press ENTER . The USB device is not recognized.
Other Operations The track/file is programmed. Additional Information Precautions Troubleshooting  Turn off the unit and reconnect the USB device, Specifications
The program step number appears, followed by then turn on the unit.
the total playing time.  The USB device is not functioning properly. Refer CD player section
Discs that this unit CAN play General to the USB device operation manual for details on
Using the display
(Example: audio CD)
Compatible devices  Audio CD (CD-DA*1 tracks) how to deal with this problem.
System
Compact disc digital audio system
 CD-R/CD-RW that contains MP3/WMA files and The power does not turn on. Laser diode properties
Compatible USB devices is finalized*2 correctly. Play does not start. Emission duration: Continuous
Checking the information of an audio CD  Make sure the AC power cord is connected to the
wall outlet securely.  Turn off the unit and reconnect the USB device. Laser output: Less than 44.6 μW
Compatibility requirements for the USB devices are *1
Press   twice to cancel Resume Play. CD-DA is the abbreviation for Compact Disc Digital Audio. (This output is the value measurement at a distance of
as follows. Before using a device with this unit, It is a recording standard used for audio CDs.  Make sure the connector of AC power cord is 200 mm from the objective lens surface on the optical
The total number of tracks and total playing time Step number Play does not start from the first track.
check that it meets the requirements. *2 Finalizing is the process to make the CD-R/CD-RW discs inserted into the AC IN jack securely. pick-up block with 7 mm aperture.)
appear on the display.
playable on the consumer disc player products, and the  Check if the batteries are inserted correctly,  Set the play mode to Normal Play. Number of channels
 Compliance with USB 2.0 (Full Speed) finalizing can be enabled or disabled as optional settings 2
matching the polarities.
Checking MP3/WMA/AAC file information  Supports Mass Storage mode* during disc creation in most recording software. MP3/WMA/AAC files cannot be played Frequency response
Last programmed track number  Replace all the batteries with new ones when the
Press DISPLAY  repeatedly while playing an * Mass Storage mode is a mode that allows a USB device OPR/BATT indicator  dims.
back. 20 Hz  20,000 Hz +1/–2 dB
to become accessible to a host device, enabling file Discs that this unit CANNOT play  The audio files may have inappropriate file
MP3/WMA file on the disc or an MP3/WMA/AAC Wow and flutter
transfers. Most USB devices support Mass Storage  CD-R/CD-RW other than those recorded in audio extensions. The file extensions supported by this Below measurable limit
file on the USB device. mode.
There is no sound.
CD format or formats conforming to ISO 9660 unit are as follows:
The display changes as follows:  Make sure the appropriate function is selected for BLUETOOTH section
Notes on the USB device Level 1/Level 2 or Joliet  MP3: file extension “.mp3” Communication System
the music or sound source you want to listen to.
 Song title ( )*1, 2  When a USB device is connected, the unit reads all the  CD-R/CD-RW of poor recording quality, CD-R/  WMA: file extension “.wma” BLUETOOTH Specification Version 2.1 + EDR
Total playing time* CD-RW with scratches or that is dirty, or CD-R/  Unplug the headphones when listening through

files on the device. If there are many folders or files on the
speakers.  AAC: file extension “.m4a,” “.3gp” and “.mp4” Output
device, it may take a long time for the unit to finish CD-RW recorded using an incompatible recording BLUETOOTH Specification Power Class 2
Artist name ( )*1 * “--:--” appears when programming an MP3/WMA  The audio files may have been created in formats
reading them. device other than MP3/WMA/AAC formats. Maximum communication range
disc/USB device or when the total playing time is The sound is noisy.
  Do not connect a USB device to the unit through a USB  CD-R/CD-RW that is unfinalized or finalized Line of sight approx. 10 m*1
longer than 100 minutes.
hub.  Is someone using a mobile phone or other  The USB storage device uses a file system other Frequency band
Album name ( )*1 incorrectly
5 Repeat steps 3 and 4 to program additional  With some connected USB devices, after an operation is equipment emitting radio waves near the unit? If than FAT16 or FAT32.* 2.4 GHz band (2.4000 GHz  2.4835 GHz)
 tracks/files. performed, there may be a delay before it is performed by so, move the unit and the BLUETOOTH device  The files are encrypted or protected by passwords. Modulation method
Notes on discs
Current file number and playing time*3 6 Press   to start Program Play. this unit. away from such devices. Devices such as mobile FHSS
 This unit may not support all the functions provided with
 Clean the CD with a cleaning cloth if phones, etc., can affect BLUETOOTH * This unit supports FAT16 and FAT32, but some USB storage Supported BLUETOOTH Profiles*2
*1 If the file does not have corresponding ID3, WMA or AAC To play the same program again, press  . the disc is dirty. Wipe the disc from media may not support both file systems.
a connected USB device. communication. A2DP (Advanced Audio Distribution Profile)
tag information, the file name, “NO ARTIST,” and “NO Note that the created program is cleared in the the center out. If there are scratches, For details, refer to the operation manual of the USB AVRCP*3 (Audio/Video Remote Control Profile)
 The playback order on this unit may differ from the
ALBUM” scroll on the display instead of the song title, following cases: playback order on a connected USB device. dirt or fingerprints on the disc, a A small humming noise is heard from the storage device in question or contact the manufacturer. Supported codec*4
artist name, and album name.  When you open the CD compartment. tracking error may occur. radio. SBC (Subband Codec)
*2 The function name is displayed for 2 seconds before the  When you connect another USB device.  Do not use solvents such as
song title appears. Compatible BLUETOOTH devices  This is not a malfunction. You may hear a small BLUETOOTH device *1 The actual range will vary depending on factors such as
benzine, thinner, commercially obstacles between devices, magnetic fields around a
 When you turn off the power of the unit in the Compatibility requirements for the devices are as humming noise from the radio depending on the microwave oven, static electricity, reception sensitivity,
*3 The artist name or album name will change to this in a available cleaners or anti-static
few seconds.
CD function. follows. Before using a device with this unit, check status of the power supply. There is no sound. aerial performance, operating system, application software,
spray intended for vinyl LPs. etc.
Note that it meets the requirements.  Make sure that this unit is not too far from the
 Do not expose the CD to direct sunlight or heat *2 BLUETOOTH standard profiles provide the specifications for
 Devices must conform to BLUETOOTH Standard “NOT IN USED” appears. BLUETOOTH device (or smartphone), or that this
Checking the connected BLUETOOTH If you try to program 26 tracks/files or more, “FULL” flashes
sources such as hot air ducts, or leave it in a car unit is not receiving interference from a wireless
BLUETOOTH communication between devices.
on the display. version 2.1 + EDR.  You pressed an invalid button. *3 Some operations may not be available depending on the
device name parked in direct sunlight as there can be a LAN, another 2.4 GHz wireless device, or a device.
 Devices must support A2DP (Advanced Audio considerable rise in temperature inside the car.
Press DISPLAY  while connecting the To display programmed track/file Distribution Profile) and AVRCP (Audio/Video CD/MP3/WMA player microwave oven. *4 Codec: Audio signal compression and conversion format.
BLUETOOTH device. information Remote Control Profile).  Do not stick paper or a sticker on the CD, or  Check that the BLUETOOTH connection was
scratch the surface of the CD. Radio section
After creating your own program, you can check The CD player does not play even when a completed properly between this unit and the Frequency range
 NFC capability (required only when using the NFC
Checking the radio information information about programmed tracks/files. pairing function of the unit).  After playing, store the CD in its case. CD is in place. BLUETOOTH device (or smartphone). Models for Europe, Thailand, Kuwait, UAE, Kenya,
Mauritius, Nigeria, Tanzania, and Uganda
Press DISPLAY  repeatedly and the display  Place the CD with the label side up.  Perform pairing again (See “Pairing this unit with a
Press DISPLAY  repeatedly while listening to For the latest information on compatible Note on DualDiscs BLUETOOTH device”).
FM: 87.5 MHz  108 MHz (50 kHz step)
the radio. changes as follows: BLUETOOTH devices, including NFC-compatible  Clean the CD. AM: 531 kHz  1,602 kHz (9 kHz step)
 A DualDisc is a two sided disc product which  Keep away from metal objects or surfaces.
The display changes as follows: Total number of steps  Last programmed track/ smartphones, check the websites below. mates DVD recorded material on one side with  Take out the CD and leave the CD compartment Models for Bolivia, Chile, Paraguay, Peru, and Uruguay
file number and the total playing time* open for about an hour to dry moisture  Make sure that the BLUETOOTH function is FM: 87.5 MHz  108 MHz (100 kHz step)
Preset number*1, 2  Frequency For customers in Europe: digital audio material on the other side. However, activated on the BLUETOOTH device (or 87.5 MHz  108 MHz (50 kHz step)
http://www.sony.eu/support since the audio material side does not conform to condensation. AM: 530 kHz  1,610 kHz (10 kHz step)
*1 A preset number is displayed only when you are listening
* “--:--” appears for MP3/WMA discs and USB devices. smartphone).
For customers in Latin America: the Compact Disc (CD) standard, playback on this  The CD-R/CD-RW is blank or unfinalized. 531 kHz  1,602 kHz (9 kHz step)
to the preset radio station.
To cancel Program Play http://esupport.sony.com/LA product is not guaranteed.  There are no playable MP3/WMA files on the disc. The sound skips or the correspondence Models for Malaysia, Vietnam, India, Pakistan, Bahrain,
*2 The display automatically returns to the frequency display Iran, Lebanon, Qatar, Yemen, Angola, Cameroon, Cote
after 2 seconds have elapsed. Press   to stop playback, and then press PLAY For customers in other countries/regions:  There is a problem with the quality of the CD-R/ distance is short.
Music discs encoded with copyright d’Ivoire, Egypt, Ethiopia, Ghana, Madagascar,
MODE  repeatedly until “PGM” disappears from http://www.sony-asia.com/support CD-RW, recording device or application software.
protection technologies  If a device that generates electromagnetic Mozambique, Senegal, Sudan, Zambia, and Zimbabwe
the display.  Replace all the batteries with new ones when the radiation, such as a wireless LAN, other FM: 87.5 MHz  108 MHz (50 kHz step)
 This product is designed to playback discs that OPR/BATT indicator  dims. BLUETOOTH device(s), or a microwave oven is 87.5 MHz  108 MHz (100 kHz step)
Selecting play mode To delete all tracks/files in the current conform to the Compact Disc (CD) standard. AM: 531 kHz  1,602 kHz (9 kHz step)
program What is BLUETOOTH wireless Recently, various music discs encoded with “NO CD” appears when the disc is loaded.
nearby, move away if possible. Or use the device
and the unit away from such sources.
530 kHz  1,610 kHz (10 kHz step)
You can set the unit to play tracks or files repeatedly
or in random order while a disc/USB device is
Stop playback, and then press  . “NO STEP”
appears and you can create a new program,
technology? copyright protection technologies are marketed
by some record companies. Please be aware that
 No disc is set in the CD compartment. Set a disc.  Remove any obstacle between this unit and the
Other models
FM: 87.5 MHz  108 MHz (100 kHz step)
among those discs, there are some that do not  The CD may have a reading problem. Replace the device or move the device and the unit away from AM: 530 kHz  1,710 kHz (10 kHz step)
stopped. following the procedure “Creating your own disc. the obstacle.
BLUETOOTH wireless technology is a short-range conform to the CD standard and may not be Intermediate frequency
program (Program Play).”
Press PLAY MODE  repeatedly. wireless technology that enables wireless data playable by this product.  The CD may be placed upside down. Place the  Locate this unit and the device as close to each FM: 128 kHz
communication between digital devices, such as a disc with the label side up. other as possible. AM: 45 kHz
computer and digital camera. BLUETOOTH wireless On safety  An unplayable disc (DVD, BD, etc.) is loaded.  Re-position this unit. Antennas
Presetting radio stations technology operates within a range of about 10 m.
 As the laser beam used in the CD player section is
Replace the disc.  Try using the BLUETOOTH device or smartphone in
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Connecting two devices as necessary is common,
harmful to eyes, do not attempt to disassemble another position.
You can store radio stations in the unit’s memory. but some devices can be connected to multiple “NO TRACK” appears on the display when Input
Each time you press the button, the indication the casing. Refer servicing to qualified personnel
devices at the same time. the disc is loaded. AUDIO IN
changes as follows: You can preset up to 30 radio stations, 20 for FM and only. A connection cannot be established. Stereo mini jack
10 for AM. You do not need to use a cable for connection, nor is
 Should any solid object or liquid fall into the unit,  No audio files recorded in supported formats, or a  Depending on the device to be connected, it may  (USB) port
Normal play (None) it necessary for the devices to face one another,

unplug the unit, and have it checked by qualified file to be played back has an unsupported file require some time to start communication.
1 Press FM/AM  repeatedly to turn on the such is the case with infrared technology. For
extension.
Type A, maximum current 500 mA, USB 2.0 Full Speed
 personnel before operating it any further.  Perform pairing again (See “Pairing this unit with a compatible
radio function and select the band “FM” or example, you can use such a device in a bag or
Single repeat ( 1) pocket.  Discs with non-standard shapes (e.g., heart, BLUETOOTH device”). Output
“AM.” square, star) cannot be played on this unit.
“DISC ERR” appears when the disc is loaded.
 BLUETOOTH standard is an international standard  Check that the BLUETOOTH device is compatible  (headphones) stereo mini jack
2 Hold down FM/AM  until “AUTO” flashes on supported by thousands of companies all over the Attempting to do so may damage the unit. Do not  The CD may be dirty. Clean the disc. with this unit. For the latest information on For 16   32  impedance headphones
All repeat ( )
the display. world, and employed by various companies use such discs.  The CD may have scratches. Replace the disc. compatible BLUETOOTH devices, check the Supported audio formats
 worldwide.  The CD may have a reading problem. Replace the information on the website. The URL is listed Supported bit rates
Selected folder play ( )* On power sources disc. under “Compatible BLUETOOTH devices.” MP3 (MPEG 1 Audio Layer-3):
Maximum communication range 32 kbps  320 kbps, VBR
  For AC operation, use the supplied AC power cord;  A blank disc may be set in the CD compartment. WMA:
Selected folder repeat play ( , )* Maximum communication range may shorten under do not use any other cord. Pairing fails.
48 kbps  192 kbps, VBR
the following conditions.  Unplug the unit from the wall outlet if it is not to The sound drops out.  Bring the BLUETOOTH device closer to the unit. AAC*:

3 Press ENTER  to store the station.  There is an obstacle such as a person, metal, or be used for an extended period of time.  Reduce the volume.  Delete the model name of this unit from the 8 kbps  320 kbps, VBR
Shuffle play ( ) wall between the unit and BLUETOOTH device. BLUETOOTH device and perform pairing again * USB function only
The stations are stored in memory from lower  When not using the batteries, remove them to  Clean the CD, or replace it if the CD is badly
 frequencies to higher ones.  A wireless LAN device is in use near the unit. avoid damage that can be caused by battery damaged. (See “Pairing this unit with a BLUETOOTH device”). Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
Program play (PGM)  A microwave oven is in use near the unit. leakage or corrosion.  Place the unit in a location free from vibrations.  Check that the BLUETOOTH device is compatible 32/44.1/48 kHz
 A device that generates electromagnetic radiation with this unit. For the latest information on
 If a station cannot be preset  Clean the lens with a commercially available WMA:
is in use near the unit. On placement blower. compatible BLUETOOTH devices, check the 32/44.1/48 kHz
Program repeat play ( , PGM) automatically information on the website. The URL is listed AAC*:
 The unit is placed on a shelf made of steel.  Do not leave the unit in a location near heat  The sound may drop out or noise may be heard
You need to preset a station with a weak signal sources, in a place subject to direct sunlight, under “Compatible BLUETOOTH devices.” 32/44.1/48 kHz
manually. when using a poor quality CD-R/CD-RW or if there * USB function only
* These functions are available only when playing MP3/ excessive dust or mechanical shock, or in a car is a problem with the recording device or
WMA files on an MP3/WMA disc or MP3/WMA/AAC files 1 Press FM/AM  repeatedly to select a band. subject to the direct rays of the sun. Pairing using the NFC function fails. General
on a USB device. application software.
2 Tune to the desired station. The unit  Do not place the unit on an inclined or unstable  Try pairing manually (See “Pairing this unit with a Speaker
BLUETOOTH device”). Some NFC-compatible Full range, 8 cm dia., 6 , cone type (2)
surface. Starting playback takes more time than
Playing tracks/files repeatedly (Repeat 3 Hold down ENTER  until “FM-xx” or “AM-xx” smartphones may not be paired using the NFC Power output
flashes on the display.  Do not place anything within 10 mm of the rear of usual. 2.0 W + 2.0 W (at 6 , 10% harmonic distortion)
Play) the cabinet. The ventilation openings must be function of this unit, depending on the features or
(Example: FM)  The following discs take a longer time to start specifications of the device. Power requirements
You can set the unit to repeatedly play CD-DA tracks unobstructed for the unit to operate properly and playback. Models for Europe, Bolivia, Chile, Paraguay, Peru, and
on an audio CD, MP3/WMA files on a CD-R/CD-RW prolong the life of its components.  A disc recorded with a complicated tree  Relaunch “NFC Easy Connect” and move the Uruguay
disc, or MP3/WMA/AAC files on a USB device in  Since a strong magnet is used for the speakers, smartphone slowly over the N mark . 230 V AC, 50 Hz (AC power supply)
structure.
normal and program play modes. keep personal credit cards using magnetic coding  Check that the smartphone meets the 9 V DC (6 R14 (size C) batteries)
 A disc that has many folders or non-MP3/WMA
Steel cabinet or spring-wound watches away from the unit to compatibility requirements (See “Compatible Models for Latin America (except for Bolivia, Chile,
1 Press CD  or USB  to turn on the CD or files.
smartphones”). Paraguay, Peru, and Uruguay)
prevent possible damage from the magnet.
USB function. 4 Press PRESET + or   until the preset Optimal performance 120 V AC, 60 Hz (AC power supply)
2 Proceed as follows. number for the station you want flashes on On operation USB device 9 V DC (6 R14 (size C) batteries)
Radio Thai model
Limited performance
the display.  If the unit is brought directly from a cold to a The USB device does not work properly. 220 V AC, 50 Hz (AC power supply)
To repeat Do this warm location, or is placed in a very damp room, The sound is weak or reception is poor.
5 Press ENTER  to store the station.  If you connect an incompatible USB device, the
9 V DC (6 R14 (size C) batteries)
A single track/ 1 Press PLAY MODE  moisture may condense on the lens inside the CD  Replace all the batteries with new ones. Other models
If another station is already assigned to the following problems may occur.
file repeatedly until “ 1” appears. Interference from other devices player section. Should this occur, the unit will not 220 V  240 V AC, 50/60 Hz (AC power supply)
selected preset number, that station is replaced  The USB device is not recognized.  Move the unit away from nearby TVs.
2 Press  or   to select Because BLUETOOTH devices and wireless LAN operate properly. In this case, remove the CD and 9 V DC (6 R14 (size C) batteries)
by the new one.  File or folder names are not displayed on this  For FM reception, extend the antenna to its full
a track/file that you want to (IEEE802.11b/g/n) use the same frequency, wait about an hour for the moisture to evaporate. Power consumption
repeat. unit. length, and reorient it for best FM reception. For
Tip microwave interference may occur and resulting in 15 W
3 Press  .  Playback is not possible. AM reception, reorient the unit itself to find the
The preset radio stations remain in the unit’s memory even communication speed deterioration, noise, or invalid On handling the unit 0.9 W (during standby mode)
best reception.
All tracks/files 1 Press PLAY MODE  in the following situations. connection if the unit is used near a wireless LAN  Do not leave the CD compartment open to avoid  The sound skips. Battery Life*1, *2
The AC power cord is unplugged. device. In such a case, perform the following. dust and debris contamination.  There is noise.  If you are in a building, listen near a window. Playback of CD
repeatedly until “ ” appears. The batteries are removed. Approx. 9 hours
2 Press  .  Use the unit at least 10 m away from the wireless  The sound output is distorted.  If a mobile phone is placed close to the unit, a
loud noise may be heard from the unit. Keep the Playback of USB device
LAN device. On cleaning the cabinet Approx. 11 hours (at 100 mA load)
A selected folder 1 Press PLAY MODE  phone away from the unit.
 If the unit is used within 10 m of a wireless LAN  Clean the cabinet, panel and controls using a soft “OVER CURRENT” appears and the unit Approx. 3 hours (at 500 mA load)
on an MP3/WMA repeatedly until “ ” and “ ”
disc or USB appear. Listening to preset radio stations device, turn off the wireless LAN device. cloth slightly moistened with a mild detergent turns off automatically.
The TV picture is unstable.
FM reception
Approx. 26 hours
device 2 Select a folder by pressing  +  Use the BLUETOOTH device as close to the unit as solution. Do not use any type of abrasive pad,  An abnormal level has been detected in the BLUETOOTH
1 Press FM/AM  repeatedly to turn on the possible. scouring powder, or solvent, such as alcohol or electrical current from the  (USB) port . In this  If you are listening to an FM program near a TV
or  . with an indoor antenna, move the unit away from
Approx. 13 hours
3 Press  . radio function and select the band “FM” or benzine. case, remove the USB device from the  (USB) port
the TV. *1 Measured by Sony standards. The actual battery life
Interference to other devices  and reconnect the USB device, and then turn
Programmed 1 Program tracks/files (see “AM.” may vary depending on the circumstances of the unit
Microwaves emitting from a BLUETOOTH device may If you have any questions or problems concerning on the unit again. If this problem persists after or operating conditions.
tracks/files “Creating your own program 2 Press PRESET + or   to select a stored affect the operation of electronic medical devices. your unit, consult your nearest Sony dealer. turning on the power of the unit, contact your After trying the suggested remedies, if the problem
(Program Play)”). *2 When using Sony alkaline batteries.
preset number for the desired radio station. Turn off the unit and other BLUETOOTH devices in nearest Sony dealer. persists, unplug the AC power cord or remove all the
2 Press PLAY MODE  until the following locations, as it may cause an accident. batteries. After all the indications on the display
Dimensions
“PGM” and “ ” appear on the Approx. 320 mm × 133 mm × 215 mm (W/H/D) (incl.
 where inflammable gas is present, in a hospital, There is no sound. disappear, plug in the AC power cord again, or projecting parts)
display. re-insert the batteries. If the problem persists,
3 Press  . Using the Sleep Timer train, airplane, or a gas station  The USB device may be connected incorrectly.
Turn off the unit and reconnect the USB device. consult your nearest Sony dealer.
Mass
Approx. 2.3 kg (incl. batteries)
 near automatic doors or a fire alarm
Then turn on the unit.
You can set the unit to turn off automatically after a Notes Supplied accessories
To cancel Repeat Play AC power cord (1)
Press   to stop playback, and then press PLAY set time has elapsed.  To be able to use the BLUETOOTH function, the There is noise, skipping, or distorted sound.
MODE  repeatedly until “ ” (or “ 1”) disappears BLUETOOTH device to be connected requires the same Design and specifications are subject to change without
from the display.
1 Press SLEEP . profile as the unit’s.  Turn off the unit and reconnect the USB device.
notice.
Then turn on the unit again.
The default setting (“90”) appears and the Note also that even if the same profile exists, devices may
“SLEEP” indicator lights up on the display. vary in function depending on their specifications.  The music data itself contains noise, or the sound
Playing tracks/files in random order is distorted. Noise may have entered during the
2 Press SLEEP  repeatedly to select the  Due to the characteristic of BLUETOOTH wireless
(Shuffle Play)
You can set the unit to play CD-DA tracks on an
desired setting.
technology, the sound played on the unit is slightly
delayed from the sound played on the BLUETOOTH device
creation of audio files. Try re‑creating audio files
and use them to play on this unit. License and Trademark Notice
during listening to the music.
audio CD, MP3/WMA files on a CD-R/CD-RW disc or
MP3/WMA/AAC files on a USB device in random  This unit supports security capabilities that comply with The USB device cannot be connected to the  MPEG Layer-3 audio coding technology and
the BLUETOOTH standard to provide a secure connection  (USB) port .
order. patents licensed from Fraunhofer IIS and
when the BLUETOOTH wireless technology is used, but
 The connector on the USB device or the USB cable Thomson.
1 Press CD  or USB  to turn on the CD or security may not be enough depending on the setting. Be
careful when communicating using BLUETOOTH wireless is being inserted backwards. Insert it to the   Windows Media is either a registered trademark
USB function. Each time you press the button, the duration (in (USB) port  in the correct direction.
technology. or trademark of Microsoft Corporation in the
minutes) changes on the display, and the
2 Press PLAY MODE  repeatedly until “ ”
selected setting is confirmed automatically after
 We do not take any responsibility for the leakage of United States and/or other countries.
appears on the display. information during BLUETOOTH communication. “READING” is displayed for an extended  This product is protected by certain intellectual
about 4 seconds.  A device featuring the BLUETOOTH function is required to time, or it takes a long time before playback
3 Press   to start Shuffle Play. property rights of Microsoft Corporation. Use or
Tip
conform to the BLUETOOTH standard specified by starts. distribution of such technology outside of this
Bluetooth SIG, and be authenticated. Even if the
To cancel Shuffle Play You can check the time left until the unit turns off by
connected device conforms to the above mentioned  The reading process can take a long time in the product is prohibited without a license from
pressing SLEEP  again after setting the sleep timer. following cases: Microsoft or an authorized Microsoft subsidiary.
Press   to stop playback, and then press PLAY BLUETOOTH standard, some devices may not be
MODE  repeatedly until “ ” disappears from the connected or work correctly, depending on the features or  There are many folders or files on the USB  The BLUETOOTH word mark and logos are owned
display. specifications of the device. device. by the Bluetooth SIG, Inc. and any use of such

Tip Connecting optional components  Noise or sound skips may occur depending on the
BLUETOOTH device connected with the unit, the
 The file structure is complex.
 The memory is almost full.
marks by Sony Corporation is under license.
During Shuffle Play, you cannot select the previous track/file
 The N Mark is a trademark or registered trademark
communication environment or the usage environment.
by pressing  . You can enjoy the sound from an optional  The internal memory is fragmented. of NFC Forum, Inc. in the United States and in
To avoid the above problems, we recommend that other countries.
component, such as a portable digital music player,
through the speakers of this unit. you adhere to the following guidelines:  Android™ and Google Play™ are trademarks of
Creating your own program (Program Google Inc.
Be sure to turn off the power of each component  Keep the total number of folders on a USB
Play) device to 100 or less.  Other trademarks and trade names are those of
before making any connections.
You can arrange the playing order of up to 25
tracks/files on a disc/USB device.
For details, refer to the instruction manual of the  Keep the total number of files per folder to 100
or less.
their respective owners. In this manual, ™ and
marks are not specified.
®
component to be connected.
1 Press CD  or USB  to turn on the CD or
USB function.
1 Connect the AUDIO IN jack  to the line Erroneous display
output jack of the portable digital music  The data stored on the USB device may be
2 Press PLAY MODE  repeatedly until “PGM”
corrupted. Send the music data to the USB device
player or other component using an audio
appears on the display. again.
connection cable (not supplied).
3 Press  or   to select a track/file.  This unit can display only numbers and letters of
When you want to specify a folder that contains
2 Turn the connected component on.
the alphabet. Other characters will not be
MP3/WMA/AAC files, press  + or   first to 3 Press AUDIO IN  and start playing sound on displayed correctly.
select a folder, and then press  or   to the connected component.
select a file. The sound from the connected component is “REC ERROR” appears.
output from the speakers.  An error occurred during transferring. Turn off the
To connect the unit to a TV or video recorder/ unit and remove the USB device from the unit.
player, use an extension cable (not supplied) with Then check the following:
a stereo-mini jack on one end and two phono  Check the remaining storage space on the USB
plugs on the other end. device. If there is insufficient space for the
transferring, delete any unnecessary files or
folders.
 Check that the data to be transferred is not
corrupted.
 Check that the file format to be transferred is
compatible with the unit.
If the message still persists, contact your nearest
Sony dealer.

S-ar putea să vă placă și