Documente Academic
Documente Profesional
Documente Cultură
Expand Ethernet from main tree Right click on LAN-DCN 1/7/2 Select Configure
Version 1.0
2
Version 1.0
3
Expand Lan Interfaces from Ethernet tree. You will see two LAN ports with same port notification
Drop the Switch Mode menu and select Provider Mode (802.1ad)
Version 1.0
5
Drop Lan Interfaces from Ethernet tree Right click on LAN-DCN 1/7/2 Select Configure
Drop Connect To menu Select Port 3 (You can select any port )
Version 1.0
6
Do the same configuration in LAN 1/7/2 and connect to Port 4. Drop Admin Status menu Select UP Press Save
button
Right click on WAN port (here AMM6PC, WAN 1/7/100) Select Configure Select General
Version 1.0
7
Select Port from Connect To drop down menu Set Admin Status to UP Press Save button
Right click on Switch port 3 Select Configure From Port Role select CN-UNI Press Save button
Version 1.0
8
Version 1.0
9
6. Configure VLAN
Version 1.0
10
Set VLAN ID to 4094 Type Name DCN Drop down the Ports/Member menu by clicking on line
Select appropriate ports (Switch ports belongs to WAN, LAn and LAN-DCN)
Version 1.0
11
Select ports to be untagged from drop down menu Ports/Untagged (Both LAN and LAN-DCN ports must be
untagged)
Version 1.0
12
Drop NPU card from AMMxxx tree Right click on selected RL-IME port Select Configure
Version 1.0
13
Select appropriate Packet link from Available Packet Links and press >> to move it to Assigned Packet Links
Version 1.0
14
Version 1.0