0 evaluări0% au considerat acest document util (0 voturi)
38 vizualizări1 pagină
The document describes two series of piezoelectric accelerometers, the 8690C and 8692C. The 8690C sensors are cube shaped for simple installation while the 8692C models have an integral mounting magnet. Both series are anodized for ground isolation and have a 4-pin connector. The sensors measure acceleration over various ranges with high sensitivity and frequency response capabilities.
The document describes two series of piezoelectric accelerometers, the 8690C and 8692C. The 8690C sensors are cube shaped for simple installation while the 8692C models have an integral mounting magnet. Both series are anodized for ground isolation and have a 4-pin connector. The sensors measure acceleration over various ranges with high sensitivity and frequency response capabilities.
The document describes two series of piezoelectric accelerometers, the 8690C and 8692C. The 8690C sensors are cube shaped for simple installation while the 8692C models have an integral mounting magnet. Both series are anodized for ground isolation and have a 4-pin connector. The sensors measure acceleration over various ranges with high sensitivity and frequency response capabilities.
Low Impedance PiezoBEAM. High sensitivity, lightweight, triaxial accelerometers. The 8690C’s are cube shaped for simplified installation. Model 8690C Model 8692C .56 Dia. The 8692C’s incorporate an integral mounting magnet; in M1 versions the magnet is replaced by a 10-32 threaded hole for stud .89 mounting. Both the 8690C and 8692C series are anodized for 4-pin Microtech ground isolation and have an pos. conn. integral 4-pin connector. 4-pin .70 cube Microtech pos. conn. [8692C] Magnetic Surface [8692C(X)M1] 10-32 Thd. .89 x .12 Deep
Request Data Bulletins K8.8690C & K8.8692C for more details.
8690C5 8690C10 8690C50
SPECIFICATIONS 8692C5 8692C10 8692C50 Acceleration range g ±5 ±10 ±50 Acceleration limit g ±8 ±16 ± 80 Threshold g rms 0.00012 0.00028 0.001 Sensitivity, ±5% mV/g 1,000 500 100 Resonant frequency (nom.) kHz 9 22 22 Frequency response, ±5% Hz 0.5 to 3k 0.5 to 5k 0.5 to 7k Phase shift, 5° Hz 4 to 2k 4 to 2k 4 to 4k Time constant (nom.) s 1 1 1 Shock (0.2 ms pulse), max. g 5,000 10,000 10,000 Transverse sensitivity % ≤1 Linearity % ±1 Operating temperature range °F 30 to 150 (@ 4mA excitation) Temperature coefficient of sensitivity %/°F – 0.02 +0.04 +0.04 Ground isolation MΩ 10 10 10 Output impedance Ω <500 <500 <100 Power supply mA & VDC 2 to 20 (constant current) & 18 to 30 Weight: 8690C/8692C g 11.2 /16 Required Interface Cable 1756B(X)* Optional Extension Cable 1578A(X)*
KISTLER INSTRUMENT CORPORATION
75 John Glenn Drive • Amherst, NY 14228-2171 e-mail: kicsales@kistler.com Phone: (716) 691-5100 • Fax: (716) 691-5226 TOLL-FREE 1-888-B Home Page: www.kistler.com
Revision Do Not Scale Drawing Finish: Break Sharp Edges Debur and Unless Otherwise Specified: Dimensions Are in Millimeters Surface Finish: Tolerances: Linear