Documente Academic
Documente Profesional
Documente Cultură
INGEPACTM PL300FI is a suitable solution for backup protection of single-pole and three-pole high
voltage breakers, guaranteeing the clearance of faults when main protection trip does not succeed.
Its main unit is a breaker failure detector that performs trip on CB’s alternative trip circuits or on CBs
upstream of the fault, thus isolating the faulted area from receiving any energy.
Additionally, this equipment provides a continuous real time CB monitoring and ancillary protection
and supervision features such as logic signals generation, events recording and different
communication options regarding physical means and protocols, which are usually not performed
by the main unit.
The technical data in this catalogue is subject to change without prior notice. FY20IPTT01_A/112014
power port EN55022
∙∙ Grids coupling and monitoring (breaker closure) under synchronisation conditions, in order to
∙∙ Measurement of radiated IEC60255-25/
radioelectric emissions EN55022
provide a stable connection of generators or separated grids (model C)
∙∙ Insulation resistance test IEC60255-5
∙∙ Intuitive configuration and monitoring software supplied with the equipment. It does not require a
previous configuration to communicate with the device.
∙∙ Dielectric test IEC60255-5
∙∙ Different standard communication protocols for electric substations selectable via setting
∙∙ Impulse voltage test IEC60255-5
∙∙ Wide dynamic range allowing connection to 5A or 1A secondary of CT
∙∙ Electrostatic discharges
immunity test IEC61000-4-2 ∙∙ User-defined logic signals
∙∙ Radiated radiofrequency fields ENV 50204/IEC ∙∙ Digital inputs and outputs and programmable LED indicators
immunity test 61000-4-3 ∙∙ Real time monitoring and recording of the parameters of the breaker
∙∙ Electrical fast transients
immunity test IEC61000-4-4
∙∙ Events and faults recording
∙∙ Surge immunity test IEC61000-4-5
∙∙ 6 setting groups for the automatic adaptation of the relay’s programming to the grid conditions.
∙∙ Synchronisation via demodulated IRIG-B or through communication protocols
∙∙ Conducted disturbances
induced by radio-frequency
fields immunity test IEC61000-4-6
∙∙ 50 Hz magnetic fields
immunity test IEC61000-4-8 Options
∙∙ Pulse magnetic fields
immunity test IEC61000-4-9
∙∙ Damped oscillatory magnetic ∙∙ Available formats Vertical 266x132.5x259 mm; Horizontal 132.5x266x259 mm; Embedded into TCP:
fields immunity test IEC61000-4-10 177x480x256 mm (19” rack)
∙∙ 50 Hz magnetic fields
immunity test IEC61000-4-17
∙∙ Connections for pin or ring type terminals
∙∙ Damped oscillatory waves IIEC61000-4-18/
∙∙ Field interfaces
immunity test IEC60255-22-1
Configuration Digital inputs Digital outputs
∙∙ DC supply voltage polarity 8 7
inversion, variations, dips and IEC61000-4-29/ 0
interruptions immunity test IEC60255-11
1 17 14
∙∙ Power frequency immunity test IEC60255-22-7
Applications
∙∙ High Voltage breaker backup protection unit for conventional or compact substations (GIS).