Documente Academic
Documente Profesional
Documente Cultură
Impulsively Loaded Structure
(Bonded Beams and Shells)
Introduction to ANSYS AUTODYN
1 © 2011 ANSYS, Inc. March 9, 2012
Quick Instructions
• In AUTODYN, set up the problem
shown in the figures.
• Get material data for AL5083H116
and Steel 4340 (with no failure
model ) from the material library.
• Save data every 100 cycles
• Refresh plot every 100 cycles
• Run the problem for 2000 cycles
• Look at Part history plots to examine
the status of the beam / shell
assembly.
2 © 2011 ANSYS, Inc. March 9, 2012
Quick Instructions
Aluminum Plates
Steel Beams
3 © 2011 ANSYS, Inc. March 9, 2012
Quick Instructions
Aluminum Plates (shells)
# elements in J/K direction = 40
YMIN = ZMIN = 0.0
YMAX = ZMAX = 4000.0
X = 0.0 (lower plate)
X = 1000.0 (upper plate)
Thickness = 10.0
4 © 2011 ANSYS, Inc. March 9, 2012
Quick Instructions
Steel Frame (Beams)
3D frame of beams
1 x-beam (10 elements)
4 y-beams (10 elements)
4 z-beams (10 elements)
Include Diagonal beams
x+y+ and x+z-
x = 0.0 to 1000.0
y = 0.0 to 4000.0
z = 0.0 to 4000.0