0 evaluări0% au considerat acest document util (0 voturi)
17 vizualizări1 pagină
This product data sheet provides information on test pieces for liquid penetrant inspection. It describes Test Piece 2 according to EN ISO 3452-3, which consists of star-shaped cracks on a chromed plate that can be used to assess penetrant sensitivity. It also includes Ni-CR test panels with predefined crack depths that provide feedback on penetrant performance over time. Finally, an aluminum test block is described that can be used as a liquid penetrant comparator.
This product data sheet provides information on test pieces for liquid penetrant inspection. It describes Test Piece 2 according to EN ISO 3452-3, which consists of star-shaped cracks on a chromed plate that can be used to assess penetrant sensitivity. It also includes Ni-CR test panels with predefined crack depths that provide feedback on penetrant performance over time. Finally, an aluminum test block is described that can be used as a liquid penetrant comparator.
This product data sheet provides information on test pieces for liquid penetrant inspection. It describes Test Piece 2 according to EN ISO 3452-3, which consists of star-shaped cracks on a chromed plate that can be used to assess penetrant sensitivity. It also includes Ni-CR test panels with predefined crack depths that provide feedback on penetrant performance over time. Finally, an aluminum test block is described that can be used as a liquid penetrant comparator.
TEST PIECE 2 ACCORDING TO EN ISO 3452-3 NI-CR TEST PANELS
The EN ISO 3452-3 test piece is used for the Our Ni-CR (nickel-chromium) test panels provide routine assessment of fluorescent dye penetrants feedback on the continuing sensitivity and per- in environments where the penetrant could be formance of your penetrant processing system susceptible to contamination and degradation. during testing. Supplied in pairs, with set crack The test piece consists of an austenitic base depths: plate. One side of the piece comprises five different sized star-shaped cracks on a chromed PART NUMBERS background. Using this side of the test piece, it 506251: 10 µm is possible to assess the relative sensitivity of a 506252: 20 µm penetrant from one batch to another. 184400: Panel set - 10, 20, 30, 50 µm The other side comprises four areas with differing levels of surface roughness; these areas can be used to make an assessment of the removeability of a penetrant during washing/ cleaning.
PART NUMBER 135510
ALUMINIUM TEST BLOCK
Use our aluminum test block as a liquid penetrant comparator. Complies with ASME Boiler & Pres- sure Vessel Code, Section V, Article 6.