Documente Academic
Documente Profesional
Documente Cultură
Separation Process
1.)
P(atm) 75993.75
component c1 c2 c3 c4 c5
Acetone 69.006 -5599.6 -7.0985 6.2237E-06 2
Water 73.649 -7258.2 -7.3037 4.1653E-06 2
290
0 0.2 0.4 0.6 0.8 1 1.2
In this problem, I first assumed the initial values of mole fraction of acetone. Then, the following C1 to C5 values must be obtained from Table 2-8 of Perry’s
Handbook. Upon obtaining the C values for Acetone and Water. The vapor pressure of each was calculated using this formula:
Get the two saturation temperature and divide into the interval. Then get P1sat and P2sat. First you must assume the x1 values and then you will
get x2 by 1-x1. Using the raoult’s law you can solve for the new x1 and x2, then you can solve for the gamma 1 and gamma 2. Repeat steps until
the values of x1 will converge.